• upgrade Comments Off
    HKS_Upgrade_Actuator_Kit_fits_Subaru_Impreza_GRB_EJ20_01_mg HKS Upgrade Actuator Kit fits Subaru Impreza GRB EJ20

    HKS Upgrade Actuator Kit fits Subaru Impreza GRB EJ20
    Amber Performance are an. By simply changing the actuator(s) on your stock turbo, power can be increased by raising boost levels. As an easy first step to tuning, actuators can be fitted to boost power without changing the stock turbocharger. By adjusting the rod of the actuator, Boost can be controlled and set to the users exact specification. Increasing boost levels can lead to engine damage or failure if the appropriate fuel management is not in place. For large boost increases, please ensure that you have fuel cut control (FCD or similar) and fuel control method (F-Con or similar). Make: Subaru Model: Impreza GRB Engine: EJ20. HKS Part Number – 14030-AF001. The item “HKS Upgrade Actuator Kit fits Subaru Impreza GRB EJ20″ is in sale since Thursday, September 6, 2012. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “amber-performance” and is located in Luton, Bedfordshire. This item can be shipped worldwide.
    • Part Manufacturer: HKS
    • Manufacturer Part Number: 14030-AF001
    • Make: Subaru
    • Model: Impreza
    • Type: Upgrade Actuator
    • Intended Use: Modification/ Enhancement
    • Brand: HKS
    • Country/Region of Manufacture: Japan

    HKS Upgrade Actuator Kit fits Subaru Impreza GRB EJ20

    Tags: , , , , ,

  • upgrade Comments Off
    Upgrade_From_A_3x_To_A_1x_Drivetrain_01_mvnm

    Tags: ,

  • upgrade Comments Off
    How_To_Upgrade_Your_Laptop_With_An_Ssd_Drive_01_wqwz

    Tags: , ,

  • upgrade Comments Off
    Upgrade_FMIC_Turbo_Intercooler_Piping_Kit_Fits_98_05_VW_JETTA_Golf_GTI_1_8T_01_bom Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T
    Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T
    Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T
    Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T
    Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T

    Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T
    You may also like. Front Mount Intercooler + Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T. 98-05 Volkswagen Jetta 1.8T Engine. 98-05 Volkswagen Golf 1.8T Engine. Intercooler Inlet / Outlet :2.5. Intercooler core size : 54017065mm. Intercooler full size :69717065mm. Made of high quality T6061 aluminum. It comes with hight quality 3PLY(4.5MM) silicone couplers and strong and tighter t-bolt clamp. 4 pieces aluminum pipes (Diameter of the alloy pipes : 3pcs 50mm/ 2″ and 1pcs 60mm /2.36″). Pipe Thickness: 1.9MM. Instruction is NOT included. Professional installation is highly recommended! The kit only include as the picture. This is an upgrade kit may require additional parts. Additional piping may be required depending on your desired set up. We offer Intake Manifold too, Please check out our Store or Listings for other products. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays). The item “Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T” is in sale since Thursday, June 28, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Intercoolers & Parts”. The seller is “hisinauto2016″ and is located in CN. This item can be shipped worldwide.
    • Brand: Unbranded/Generic
    • Manufacturer Part Number: Does not apply
    • Country/Region of Manufacture: China
    • EAN: Does not apply

    Upgrade FMIC Turbo Intercooler & Piping Kit Fits 98-05 VW JETTA Golf GTI 1.8T

    Tags: , , , , , , , ,

  • upgrade Comments Off
    HKS_Upgrade_Actuator_Kit_fits_Subaru_Impreza_STi_GC8_Version_3_1430_RF001_01_uxvo HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3 1430-RF001

    HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3 1430-RF001
    By simply changing the actuator(s) on your stock turbo, power can be increased by raising boost levels. As an easy first step to tuning, actuators can be fitted to boost power without changing the stock turbocharger. By adjusting the rod of the actuator, Boost can be controlled and set to the users exact specification. Increasing boost levels can lead to engine damage or failure if the appropriate fuel management is not in place. For large boost increases, please ensure that you have fuel cut control (FCD or similar) and fuel control method (F-Con or similar). Make: Subaru Model: Impreza STi GC8 (Version 3) Engine: EJ20. HKS Part Number – 1430-RF001. The item “HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3 1430-RF001″ is in sale since Monday, December 5, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “sumopoweru.k” and is located in Ely, Cambridgeshire. This item can be shipped worldwide.
    • Manufacturer Part Number: 1430-RF001
    • Brand: HKS

    HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3 1430-RF001

    Tags: , , , , , ,

  • upgrade Comments Off
    HKS_Upgrade_Actuator_Kit_fits_Subaru_Impreza_STi_GC8_Version_3_01_wetb HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3

    HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3
    Amber Performance are an. By simply changing the actuator(s) on your stock turbo, power can be increased by raising boost levels. As an easy first step to tuning, actuators can be fitted to boost power without changing the stock turbocharger. By adjusting the rod of the actuator, Boost can be controlled and set to the users exact specification. Increasing boost levels can lead to engine damage or failure if the appropriate fuel management is not in place. For large boost increases, please ensure that you have fuel cut control (FCD or similar) and fuel control method (F-Con or similar). Make: Subaru Model: Impreza STi GC8 (Version 3) Engine: EJ20. HKS Part Number – 1430-RF001. The item “HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3″ is in sale since Thursday, March 26, 2015. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “amber-performance” and is located in Luton, Bedfordshire. This item can be shipped worldwide.
    • Part Manufacturer: HKS
    • Manufacturer Part Number: 1430-RF001
    • Make: Subaru
    • Model: Impreza GC8
    • Type: Upgrade Actuator
    • Intended Use: Modification/ Enhancement
    • Brand: HKS
    • Country/Region of Manufacture: Japan

    HKS Upgrade Actuator Kit fits Subaru Impreza STi GC8 Version 3

    Tags: , , , , ,

  • upgrade Comments Off
    How_To_Upgrade_Stereo_Sat_Nav_Range_Rover_L322_Vogue_01_wj

    Tags: , , , , ,

  • upgrade Comments Off
    Upgrade_Wiring_Kit_vintage_1950s_Bumblebee_Caps_CTS_fit_Gibson_Les_Paul_Historic_01_gbkr Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
    Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
    Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
    Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic

    Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
    Vintage Relic pre-wired upgrade kit fits Gibson Les Paul. Real vintage1950s Sprague Bumblebee. 022 uF 400v tone capacitors. This is the best and most economical way to improve the tone of your Les Paul! Direct replacement for your Historic Custom Shop Reissue R9 R8 R7 R6 R4 R0 1959 1958 1957 1956 1954 1960 reissue. Hear what you’ve been missing from your humbuckers or P-90s! 4 USA CTS 500k 10% Tolerance short shaft (brass) audio taper pots (2 volume, 2 tone). Top of the line CTS pots with tight tolerances and measuring 550k. We do measure all pots and use higher values for the volume positions. You may request specific pot values and we will do our best to match those values; please provide this info at check ou t. If you prefer LONG shaft pots, note that at checkout. 2 vintage 1950s Sprague Bumblebee. 022uF paper-in-oil vintage tone capacitors. 50’s style wiring. Vintage correct 20 AWG silver plated copper grounding wire between the pots. W i ring diag ram included. Ask if you need it wired for LEFT HANDED layout (note: we do not have reverse taper pots). Please note : this kit is designed for Gibson Les Paul Historic Reissue or vintage guitars that use. If your guitar requires. Shaft pots (most all non-Historic Reissue Gibsons), please request “long shaft” at checkout. Also, CTS pots require a 3/8 hole (in the top of your guitar); most USA made guitars are drilled this way, however imported guitars often are not. Can Size = 15/16 in. Radius X 3/8 in. Bushing Threads = 3/8-32. Bushing Height = 3/8 in. Shaft Type – split. 238 in (6.3mm). Spline Count = 24 (NOT metric). Shaft Length – 3/8 in. Hole size requirement = 3/8 in. Value = 550K Ohms. The item “Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic” is in sale since Wednesday, September 5, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “vintage-relic” and is located in Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam, Uruguay.
    • To Fit Guitar: Electric Guitar
    • Modified Item: No
    • Country/Region of Manufacture: United States
    • Custom Bundle: No
    • Country of Manufacture: United States
    • Type: Switches
    • MPN: Does Not Apply
    • Brand: Gibson
    • Non-Domestic Product: No

    Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic

    Tags: , , , , , , , ,

  • upgrade Comments Off
    Upgrade_Turbo_Kits_GT35_Turbo_for_95_98_Fits_Nissan_240SX_S14_S15_SR20DET_01_etw Upgrade Turbo Kits GT35 Turbo for 95-98 Fits Nissan 240SX S14 S15 SR20DET

    Upgrade Turbo Kits GT35 Turbo for 95-98 Fits Nissan 240SX S14 S15 SR20DET
    Fits Nissan 240SX S14 S15 SR20DET. 2.4L 2389CC DOHC SR20DET ENGINE ONLY. COLORS ARE RANDOMLY SELECTED. 100% Brand New, Never Used or Installed. Core Length 23.5. Core Height 11.75. Core width 2.75. Both Inlet/Outlet Ports are 3. Construction Machine Cut and Stamped, Hand Welded. Compress Air Flow Rate<350 Cubic Feet/Min, Rated up to 500 MAX HP. High Pressure silicone hoses. Cast Iron SR20 Mount Manifold. Increase Engine Exhaust Output and Efficiency. 4" Inlet/ 2.5" Outlet. EXD 3.23 (82.00MM). IND 2.42 (61.40MM). WHL DIA 68.00MM. 4 Bolt Standard Hot Side. EMUSA 38MM Adjustable Wastegate Adjustable, 4/6/8/10 PSI High Polish Finish CNC Machined Proven Accuracy. This Particular Oil Line Kit comes with Everything You Will Need Including. Braided oil feed line 2. Banjo fitting with washers for direct connection to turbo 3. Several different size fittings for universal fit. Silicone oil return line 5. 2 90degree elbow barb fittings 6. 4 hose clamps 7. 2 barb to pipe thread fittings 8. Mounting bracket for oil return line. SSQV Blow off Valve. Please inspect your order upon receipt. All items are brand new unless otherwise stated. Professional installation is highly recommended. We do not answer emails on weekend, and we will reply all emails in the order it was receive. No other responsibilities or warranties are expressed or implied. The item "Upgrade Turbo Kits GT35 Turbo for 95-98 Fits Nissan 240SX S14 S15 SR20DET" is in sale since Monday, September 16, 2013. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "superspeedworldshop" and is located in Griffith, Indiana. This item can be shipped worldwide.
    • Manufacturer Part Number: J273
    • Warranty: Yes
    • Part Brand: EMUSA
    • Brand: emusa
    • Interchange Part Number: #79 TK NS S14 S15 SR20

    Upgrade Turbo Kits GT35 Turbo for 95-98 Fits Nissan 240SX S14 S15 SR20DET

    Tags: , , , , , , , ,

  • upgrade Comments Off
    Upgrade_Turbo_Kits_GT35_Turbo_fits_95_98_Nissan_240SX_S14_S15_KA24DET_01_ryeg Upgrade Turbo Kits GT35 Turbo fits 95-98 Nissan 240SX S14 S15 KA24DET

    Upgrade Turbo Kits GT35 Turbo fits 95-98 Nissan 240SX S14 S15 KA24DET
    Fits Nissan 240SX S14 S15 KA42DET. 2.4L 2389CC DOHC KA24DET ENGINE ONLY. COLORS ARE RANDOMLY SELECTED. 100% Brand New, Never Used or Installed. Core Length 23.5. Core Height 11.75. Core width 2.75. Both Inlet/Outlet Ports are 3. Construction Machine Cut and Stamped, Hand Welded. Compress Air Flow Rate<350 Cubic Feet/Min, Rated up to 500 MAX HP. High Pressure silicone hoses. Cast Iron KA24DET Manifold. High Performance Turbo Racing Design. Increase engine exhaust output and efficiency. 4" Inlet/ 2.5" Outlet. EXD 3.23 (82.00MM). IND 2.42 (61.40MM). WHL DIA 68.00MM. 4 Bolt Standard Hot Side. EMUSA 38MM Adjustable Wastegate Adjustable, 4/6/8/10 PSI High Polish Finish CNC Machined Proven Accuracy. This Particular Oil Line Kit comes with Everything You Will Need Including. Braided oil feed line 2. Banjo fitting with washers for direct connection to turbo 3. Several different size fittings for universal fit. Silicone oil return line 5. 2 90degree elbow barb fittings 6. 4 hose clamps 7. 2 barb to pipe thread fittings 8. Mounting bracket for oil return line. SSQV Blow off Valve. Please inspect your order upon receipt. All items are brand new unless otherwise stated. Professional installation is highly recommended. We do not answer emails on weekend, and we will reply all emails in the order it was receive. No other responsibilities or warranties are expressed or implied. The item "Upgrade Turbo Kits GT35 Turbo fits 95-98 Nissan 240SX S14 S15 KA24DET" is in sale since Monday, September 16, 2013. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "superspeedworldshop" and is located in Griffith, Indiana. This item can be shipped worldwide.
    • Manufacturer Part Number: J274
    • Warranty: Yes
    • Part Brand: EMUSA
    • Brand: emusa
    • Interchange Part Number: #82 TK NS S14 S15 KA24

    Upgrade Turbo Kits GT35 Turbo fits 95-98 Nissan 240SX S14 S15 KA24DET

    Tags: , , , , , , , ,