• Category:

    • long Comments Off
      LONG_SHAFT_Ready_Built_Gibson_Epiphone_Les_Paul_Wiring_Upgrade_Loom_Harness_Kit_01_wcr LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit

      LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit
      Bloodstone Guitar Works specialise in custom building a guitar to your specification, one that you can have the ultimate confidence in its feel, tone and playability and truly cherish. We also produce our own range of Handwound pickups and Handwired wiring looms and undertake upgrades, repairs and setups. LONG SHAFT Ready Built up Gibson Les Paul Wiring upgrade / Wiring Loom. Long Shaft Length (18mm thread) – See other listing for cheaper 10mm option. These wiring looms are Individually hand-wired from UK-sourced genuine parts using 22 gauge Gavitt vintage cloth covered wire. A drop in replacement and a great performance and reliability upgrade for all Les Pauls. Top quality matched components are used throughout and the “float wire” method is adopted where all wires are pulled tight and elevated so they make no contact with the control /baseplate. It takes a little longer to build but is definitely worth the effort to maximise performance. Matched CTS USA Custom Audio EVERSE Taper 500K or 250K (You choose) Split Shaft Volume & Tone Potentiometers – smooth linear volume and tone change (no bunching or on/off effect). 0.022uF Sprague “Orange Drop” Tone Capacitors – removes the thinness and harshness inherent with budget capacitors. Separate “treble bleed” mod for both pickups – no muddiness of tone when reducing the volume knob. Premium quality SwitchCraft / High quality import and No Switch option. Bridge earth wire supplied with heatshrink tube to twist join with exiting earth, solder and insulate. Easy to follow colour coded wiring diagram. Fully soldered together and includes all nuts screws and washers ready to fit to your guitar. Atched in-house to within 10 Ohms (CTS pots tolerance is +/- 20% so a 250K pot can vary from 200-300 Ohms). Now using the 715p version which is sonically superior to the commonly used 225p. This item is in the category “Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “bloodstoneguitarworks” and is located in this country: GB. This item can be shipped to United Kingdom.
      • Jack socket type: Switchcraft 3/8\
      • Switch type: SwitchCraft Switch Fitted
      • To Fit: Electric Guitar
      • Country/Region of Manufacture: United Kingdom
      • Brand: Gibson
      • Type: Loom

      LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit

      Tags: , , , , , , , , , ,

    • upgrade Comments Off
      Upgrade_prewired_wiring_kit_Fits_Gibson_Epiphone_SG_3_Pick_Up_Short_Shaft_Pots_01_gxiu Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots

      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Welcome to Tone Man Guitar. Give your guitar that Classic SG Tone. Warmth, body and fuller tone. K40Y-9 Vintage Russian PIO Caps. It will make a difference! Please read the details below. The standard wiring for 3 humbucker guitar is Bridge / Bridge & Middle / Neck. This kit has 1 Master Tone and 3 Volume controls. What’s In The Kit. Bourns 500K Potentiometers Short-Split-Shaft Coarse Spline, Audio Taper. 1 Master Tone 3 Volume. Switchcraft 3-Way R Angle L Shape Toggle switch with black tip. 033uf PIO Vintage Aged Tone Cap (Qty 1 cap). Switchcraft ¼ inch Output Jack. All prewired with Gavitt cloth push back wire thru out. Assembly Template Hard Board. All assembled except for final hook up of Pickups and ground connection. 50s Wiring diagram and easy to read step by step installation instructions. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you are not sure whether your guitar uses short (3/8″) or long (3/4″) shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul’s, All Epiphone’s, All SG’s use short shafts. This kit uses Short Shaft. Note: If you have an imported guitar e. You may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50’s and 60’s guitars is what I try to achieve. I guarantee the best parts and workmanship. I believe in good communication. We Want You To Be 100% Satisfied! I also offer other parts. O caps, pots and various pre-assembled vintage wiring harnesses for Les Paul’s, Stratocasters and others. The item “Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots” is in sale since Saturday, April 6, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • Country/Region of Manufacture: United States
      • MPN: Does Not Apply
      • Custom Bundle: No
      • Brand: Tone Man Guitar
      • Non-Domestic Product: No
      • Modified Item: No
      • Type: Prewired Upgrade SG Kit

      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots

      Tags: , , , , , , , , ,

    • phil Comments Off
      Phil_Mcknight_Shows_Off_Our_New_Epiphone_Hardware_And_Electronics_Upgrade_Kit_01_xhcy

      Tags: , , , , , ,

    • blues Comments Off
      The_Blues_Prewired_Guitar_Wiring_Upgrade_KIt_PIO_Caps_Fits_Gibson_Epiphone_ES175_01_vwkv The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175
      The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175
      The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175
      The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175
      The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175

      The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175
      Welcome to Tone Man Guitar. Our ES175 Blues kit uses Paper In Oil Aged K42Y tone caps for improved overall performance. Excellent clarity with very vintage jazz warm and woody tones. All wired 50’s style with premium new components that perform better than the stock electronics found in today’s guitars. The difference in our PIO caps and others is ours are aged. Generally from the mid 80’s. This is what gives true vintage tone. You will hear the difference. This harness is a full replacement for any Gibson or Epiphone ES175, ES295 and other full holly body guitar styles with longer switch wire run in upper or lower body next to neck. Must not have any wood bracing between the two f holes that will obstruct the 3 way switch from being fed through. Check layout measurements below. Other similar models are ES275, ES350T, ES125TD, Epi Broadway, Epi Joe Pass. Be sure and compare component distance measurements and f hole size to compare to your guitar. Template component measurements center to center. Volume to Volume 2.5″ Switch to Neck Volume 15″. Tone to Tone 2.5″ Switch to Jack 20″. Volume to Tone 2.5. We add an additional 1/2 to 1 inch extra wire run between components for installation flexibility. Wiring harness is feed thru the f holes and requires opening in the widest part of the f hole no less than 1 – 1/8 inch to be able to feed the harness into the hollow body. What’s In The Blues Kit. Bourns 500K Pro Audio Potentiometers – Short-Split-Shaft, Audio Taper 18 teeth course. Switchcraft 3-Way Short Toggle Switch with black tip. Carefully hand wired in secure and insulated. Vintage Gavitt Braided Cloth Push Back wiring all wrapped high quality shrink. K42Y PIO Vintage Aged NOS Russian. 015uf bridge Tone Caps. These caps are aged and not just reproduced copies. Switchcraft ¼ inch Output Jack. Assembly Template Hard Board All assembled except for final hook up of Pickups connections and grounds. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you have an imported / outside of USA manufactured guitar you may need to modify the potentiometer holes to 3/8 inch to accommodate the full size Bourns pots. Your installation instructions will cover this. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. About Tone Man Guitar: I have been playing the guitar for over 50+ years. My passion has always been about the Tone. I have tried many different types of caps, pots and wiring over the years. I have a great passion for providing only the best parts and workmanship. I appreciate you visiting my site and I look forward to helping you with your Tone or any other type of guitar modifications. I believe in good communication. I will respond as quickly as I can. Same goes when you receive your parts. I want you to be satisfied! The item “The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175″ is in sale since Wednesday, March 20, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Other Guitar Parts”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
      • Non-Domestic Product: No
      • Modified Item: No
      • To Fit: Electric Guitar
      • Custom Bundle: No
      • MPN: Does Not Apply
      • Brand: Tone Man Guitar

      The Blues Prewired Guitar Wiring Upgrade KIt PIO Caps Fits Gibson Epiphone ES175

      Tags: , , , , , , , , ,

    • prewired Comments Off
      The_59_Prewired_Wiring_Upgrade_Kit_K40Y_PIO_Caps_Fits_Gibson_Epiphone_ES175_01_ale The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175
      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175
      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175
      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175
      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175
      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175

      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175
      Welcome To Tone Man Guitar. Tone Man Guitar prebuilt 50’s wiring kits will improve your guitars overall tone. Your sound will be stronger, tighter and improved clarity. Notes will open up. Elimination of some treble loss when you roll the volume down. Tone and volume controls are very responsive to each other and smoother. By rolling back your volume some you can clean up an over driven amp. You will not find a better product or selection. I recommend 50’s wiring for the best over tone performance. Our 59 Kit uses Paper In Oil K40Y vintage tone caps for improved overall performance. Excellent clarity, aged vintage warm and woody tones with improved sustainability. These caps are equal to or better than Bumble Bee or Vitamin Q’s. We have found no better tone cap. You will hear and feel the difference. This Kit Is For. This harness is a full replacement for any Gibson or Epiphone ES175, ES295 and other full holly body guitar styles with longer switch wire run in upper or lower body next to neck. Must not have any wood bracing between the two f holes that will obstruct the 3 way switch from being fed through. Check layout measurements below. Other similar models are ES275, ES350T, ES125TD, Epi Broadway, Epi Joe Pass. Be sure and compare component distance measurements and f hole size to compare to your guitar. Template component measurements center to center. Volume to Volume 2.5″ Switch to Neck Volume 15″. Tone to Tone 2.5″ Switch to Jack 20″. Volume to Tone 2.5. We add an additional 1/2 to 1 inch extra wire run between components for installation flexibility. Wiring harness is feed thru the f holes and requires opening in the widest part of the f hole no less than 1 – 1/8 inch to be able to feed the harness into the hollow body. What’s In The 59 Kit. 4 Bourns 500K Potentiometers – Short-Split-Shaft, Audio Taper 18 teeth course. 1 Switchcraft 3-Way Short Toggle Switch with black tip. Carefully hand wired in secure and insulated. 1 – Vintage Gavitt Braided Cloth Push Back wiring all wrapped high quality shrink. 2 K40Y PIO Vintage Aged NOS Russian. 015uf bridge Tone Caps. These caps are aged. 1 Switchcraft ¼ inch Output Jack. 1 Assembly Template Hard Board All assembled except for final hook up of Pickups connections and grounds. 1 – 50’s wiring for the best vintage tone. Includes 50s wiring diagram and detailed stepe by step installation instructions. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you have an imported / outside of USA manufactured guitar you may need to modify the potentiometer holes to 3/8 inch to accommodate the full size Bourns pots. Your installation instructions will cover this. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. About Tone Man Guitar: I have been playing the guitar for over 50+ years. My passion has always been about the Tone. I have tried many different types of caps, pots and wiring over the years. I have a great passion for providing only the best parts and workmanship. I appreciate you visiting my site and I look forward to helping you with your Tone or any other type of guitar modifications. I believe in good communication. I will respond as quickly as I can. Same goes when you receive your parts. I want you to be satisfied! The item “The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175″ is in sale since Friday, March 29, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Other Guitar Parts”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
      • Non-Domestic Product: No
      • Modified Item: No
      • To Fit: Electric Guitar
      • Custom Bundle: No
      • MPN: Does Not Apply
      • Brand: Tone Man Guitar

      The 59 Prewired Wiring Upgrade Kit K40Y PIO Caps Fits Gibson Epiphone ES175

      Tags: , , , , , , , ,