• Category:

    • walbro Comments Off
      Fit_For_WALBRO_F90000267_450LPH_High_Performance_E85_Fuel_Pump_Flex_Hose_Kit_01_jxz Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit

      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit. (1) Walbro F90000267 450lph High Pressure Fuel Pump. See detailed photos for reference to what the newer kit includes. Walbro F90000267 450LPH pump is the highest flowing intank fuel pump on the market, and is E85 safe to boot. Walbro designed the pump to meet the requirements of modern turbocharged applications where a single 255LPH fuel pump is insufficient. The pump uses a turbine style design which incorporates two composite plastic blades. The turbine design lends itself to extremely quiet operation, especially compared to Walbro’s previous “gerator” pump design that had metal gears which were notorious for a very loud whining noise which could easily be heard over even the loudest aftermarket exhaust setups. The Walbro 450LPH pump can flow anywhere from 15-120psi (the bypass valve is set higher than Walbro’s previous fuel pumps, which were around 85psi). Final fuel pressure is determined by your fuel pressure regulator. Please note that this is an aftermarket fuel pump, and some modifications may be required to get it to fit. The overal size is very similar to Walbro’s previous generation GSS340/GSS341/GSS342, however the base is slightly enlarged as shown in the pictures. No other intank pump on the market can come close. This pump can support over 800hp using larger than stock fuel lines. This pump can still support significantly more power than a Walbro 255LPH pump even when using stock fuel lines. Orders will be processed instantly and dispatched in same day normally, so we do NOT accept. Note after you place orders. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We appreciate your business and strived to improve our customer service and our commitment to quality. And we will do our best help you resolved it. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “gearautosalons” and is located in this country: GB. This item can be shipped to United Kingdom, Ireland, Germany, France, Italy, Spain.
      • Type: Fuel Pump
      • Manufacturer Part Number: F90000267&400-1168
      • Reference OE/OEM Number: F90000267
      • Manufacturer Warranty: 5 Years
      • Placement on Vehicle: In Tank Performance Upgrade
      • Interchange Part Number: F90000267 TIA485-2,TIA-485-2
      • Brand: Gearmonster

      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit

      Tags: , , , , , , , ,

    • mishimoto Comments Off
      Mishimoto_Silicone_Induction_Hose_For_01_07_Subaru_WRX_2004_2014_Subaru_STI_RED_01_mf Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED

      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED
      Mishimoto’s silicone turbo inlet hose for the Subaru WRX/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, making them the ultimate upgrade in performance and style. Direct fit for 20012007 Subaru WRX and 20042014 Subaru WRX STI. Max temperature of 330°F. Made of high-grade silicone and heat-resistant embedded fibers. Reinforced with wire to prevent collapse under pressure. Increased flow due to larger internal diameter. Available in black, blue, or red. Some applications are equipped with a PCV pass-through sensor that will require modification to avoid warning lights. Simply remove the pass-through sensor from the line and insert it into the sensor. Be sure to add protective covering to the sensor. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED” is in sale since Monday, January 20, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • Interchange Part Number: Performance Upgrade Increase Increased Volume Eco
      • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
      • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
      • Manufacturer Part Number: MMHOSE-SUB-IHRD
      • Brand: Mishimoto

      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX/2004-2014 Subaru STI RED

      Tags: , , , , , ,

    • mishimoto Comments Off
      Mishimoto_Silicone_Induction_Hose_For_01_07_Subaru_WRX_2004_2014_Subaru_STI_01_hcag Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI
      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI

      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI
      Mishimoto’s silicone turbo inlet hose for the Subaru WRX/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, making them the ultimate upgrade in performance and style. Direct fit for 20012007 Subaru WRX and 20042014 Subaru WRX STI. Max temperature of 330°F. Made of high-grade silicone and heat-resistant embedded fibers. Reinforced with wire to prevent collapse under pressure. Increased flow due to larger internal diameter. Available in black, blue, or red. Some applications are equipped with a PCV pass-through sensor that will require modification to avoid warning lights. Simply remove the pass-through sensor from the line and insert it into the sensor. Be sure to add protective covering to the sensor. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI” is in sale since Monday, January 20, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • Interchange Part Number: Performance Upgrade Increase Increased Volume Eco
      • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
      • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
      • Manufacturer Part Number: MMHOSE-SUB-IHBK
      • Brand: Mishimoto

      Mishimoto Silicone Induction Hose For 01-07 Subaru WRX 2004-2014 Subaru STI

      Tags: , , , , , ,

    • mishimoto Comments Off
      Mishimoto_Performance_Silicone_Induction_Hose_Upgrade_For_2008_2014_Subaru_WRX_01_vw Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX
      Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX
      Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX
      Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX
      Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX

      Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX
      Mishimoto’s silicone induction hose for the 0814 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. The Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything youll need for installation, including a robust 2.5 T-bolt clamp for the turbo as well as added worm-gear clamps. Available in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX/STI Performance Race Intake. Direct fit for the 20082014 WRX and 20052009. Fits with stock intake, Mishimoto Subaru WRX/STI Performance Cold Air Intake, or Mishimoto Subaru WRX/STI Performance Race Intake. Includes removable CNC-machined aluminum fittings for added durability and easier installation. Molded steel rings for added reinforcement and resistance from collapsing. Available in black, blue, or red. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX” is in sale since Friday, January 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • Interchange Part Number: Performance Upgrade Increase Increased Volume Eco
      • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
      • Manufacturer Part Number: MMHOSE-SUB-08IHBK
      • Brand: Mishimoto
      • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm

      Mishimoto Performance Silicone Induction Hose Upgrade For 2008-2014 Subaru WRX

      Tags: , , , , , , ,

    • mishimoto Comments Off
      Mishimoto_Performance_Silicone_Induction_Hose_For_2008_2014_Subaru_WRX_RED_01_mez Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED
      Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED
      Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED
      Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED

      Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED
      Mishimoto’s silicone induction hose for the 0814 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. The Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything youll need for installation, including a robust 2.5 T-bolt clamp for the turbo as well as added worm-gear clamps. Available in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX/STI Performance Race Intake. Direct fit for the 20082014 WRX and 20052009. Fits with stock intake, Mishimoto Subaru WRX/STI Performance Cold Air Intake, or Mishimoto Subaru WRX/STI Performance Race Intake. Includes removable CNC-machined aluminum fittings for added durability and easier installation. Molded steel rings for added reinforcement and resistance from collapsing. Available in black, blue, or red. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED” is in sale since Monday, January 20, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • Interchange Part Number: Performance Upgrade Increase Increased Volume Eco
      • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
      • Manufacturer Part Number: MMHOSE-SUB-08IHRD
      • Brand: Mishimoto
      • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm

      Mishimoto Performance Silicone Induction Hose For 2008-2014 Subaru WRX RED

      Tags: , , , , , ,

    • fits Comments Off
      Fits_Subaru_WRX_Impreza_GDA_GDB_00_05_Red_Upgrade_Intercooler_piping_hose_Kit_01_wxc Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit

      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit
      Fuel Supply & Treatment. Intake & Exhaust System. You may also like. Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit. Aluminium Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05. Subaru WRX Impreza GDA GDB 00-05. 9 x High temperature silicone. 18 x T-Bolt Clamp. This kit is designed for the specific model as stated above, it is not a universal kit. All items are brand new, in stock. As always we recommend professional installation and set-up as no fitting instructions are included. This kit is normally used with the large tuning upgrade front mount intercooler (2.36 inlet/outlet). The kit only include as the picture. This is an upgrade kit may require additional parts. Additional piping may be required depending on your desired set up. Same as on the picture. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays). The item “Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit” is in sale since Tuesday, December 10, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Intercoolers & Parts”. The seller is “au2parts2014″ and is located in suzhou. This item can be shipped worldwide.
      • Brand: CSKS
      • Manufacturer Part Number: 03CSG032ARD
      • Type: Intercooler Pipe
      • Country/Region of Manufacture: China

      Fits Subaru WRX Impreza GDA GDB 00-05 Red Upgrade Intercooler piping hose Kit

      Tags: , , , , , , ,

    • upgrade Comments Off
      Upgrade_Intercooler_piping_hose_Kit_Fits_Subaru_WRX_Impreza_GDA_GDB_00_05_Blue_01_nc Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue

      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue
      Body & Exterior Part. Fuel Supply & Treatment system. Hose ends and fitting. Intake & Exhaust System. You may also like. Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue. Aluminium Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05. Subaru WRX Impreza GDA GDB 00-05. 9 x High temperature silicone. 18 x T-Bolt Clamp. This kit is designed for the specific model as stated above, it is not a universal kit. All items are brand new, in stock. As always we recommend professional installation and set-up as no fitting instructions are included. This kit is normally used with the large tuning upgrade front mount intercooler (2.36 inlet/outlet). The kit only include as the picture. This is an upgrade kit may require additional parts. Additional piping may be required depending on your desired set up. Same as on the picture. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays). The item “Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue” is in sale since Monday, September 23, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Intercoolers & Parts”. The seller is “mighty1bay” and is located in suzhou. This item can be shipped worldwide.
      • Brand: Unbranded
      • Manufacturer Part Number: 03CSG032ABL
      • Type: Intercooler Pipe
      • Country/Region of Manufacture: China

      Upgrade Intercooler piping hose Kit Fits Subaru WRX Impreza GDA GDB 00-05 Blue

      Tags: , , , , , , , ,

    • black Comments Off
      PPE_Black_Silicone_Upper_Lower_Coolant_Hose_Kit_For_2006_2010_GM_6_6L_Duramax_01_mw PPE Black Silicone Upper & Lower Coolant Hose Kit For 2006-2010 GM 6.6L Duramax

      PPE Black Silicone Upper & Lower Coolant Hose Kit For 2006-2010 GM 6.6L Duramax
      Factory coolant hose T fittings are molded hose or made out of plastic and are prone to cracking at junctions, causing coolant loss. Replace your worn or leaky factory coolant hose system with PPEs Performance Silicone Coolant Hose Kit. The PPE Performance Silicone Coolant Hose Kit is a direct bolt-on upgrade that requires no cutting or modifications. Perfect factory fit with better-than-factory performance. Perfect for your stock or highly modified Duramax 6.6L diesel truck. Engineered for performance and durability, featuring 4-ply heat-resistant internal fibers that provide strength against high-pressures and temperatures. PPEs Silicone Coolant Hose Kits incorporate TIG welded, polished 304 stainless steel T fittings that eliminate any chance of failures at the T junctions. Durable 5 mm thick silicone is twice as thick as the factory hose to ensure long-lasting performance. The quick-connect/disconnect (LBZ, LMM, LML) end is made from billet aluminum and 304 stainless steel. Stainless steel clamps ensure a tight fit that performs better than factory. Durable, 5 mm thick silicone. 4-ply heat-resistant internal fibers. TIG welded, polished 304 stainless steel T couplings. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “PPE Black Silicone Upper & Lower Coolant Hose Kit For 2006-2010 GM 6.6L Duramax” is in sale since Monday, December 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Hoses & Clamps”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
      • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
      • Interchange Part Number: 6.6 Chevy Chevrolet GMC Sierra Silverado 2500 3500
      • Material: Silicone
      • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
      • Color: Black
      • Manufacturer Part Number: 119020200
      • Brand: PPE
      • Fitment Type: Direct Replacement

      PPE Black Silicone Upper & Lower Coolant Hose Kit For 2006-2010 GM 6.6L Duramax

      Tags: , , , , , , ,

    • sale- Comments Off
      Sale_Intercooler_Piping_Silicone_Hose_Full_Upgrade_Kit_Fit_300zx_Z32_Vq30_01_dip Sale- Intercooler Piping + Silicone Hose Full Upgrade Kit Fit 300zx Z32 Vq30

      Sale- Intercooler Piping + Silicone Hose Full Upgrade Kit Fit 300zx Z32 Vq30
      QUALITY AFTER MARKET PARTS / GENUINE PRODUCTS. High Performance Track / Racing / DRiFT / STREET CAR PARTS!! This is the BEST time ever to get something for super hot deal ,,,,, man! UP TO 70% OFF!!!!!!!!!!!!!!!!!!!!!!!!!! TO REPLACE THE FACTORY INTERCOOLER PIPES , WITH QUALITY ALUMINIUM PIPES + HEAVY DUTY SILICONE HOSES, + HEAVY DUTY STAINLESS STEEL HOSE CLAMP! RETAIL PRICE = 299.99/EA. SKRacingPRO – – PERFORMANCE PRODUCTS. Item Name/ Part Number. We expect to hear from you within. Please make sure your. Although we will try our best to amend order details if. Necessary, we cannot guarantee that it can be done. Please verify the correct part before ordering and installing. We are more than happy to assist you. If for any reason you are not happy with our. We appreciate your Positive. The item “SALE- INTERCOOLER PIPING + SILICONE HOSE FULL UPGRADE KIT FIT 300ZX Z32 VQ30″ is in sale since Monday, June 27, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Performance Parts\Other”. The seller is “autoparts2003″ and is located in West Ryde, NSW. This item can be shipped worldwide.
      • Manufacturer Part Number: X41X11
      • Brand: SKRACINGPRO
      • MPN: X41X11

      Sale- Intercooler Piping + Silicone Hose Full Upgrade Kit Fit 300zx Z32 Vq30

      Tags: , , , , , , , ,

    • perrin Comments Off
      Perrin_3_Turbo_Inlet_Black_Hose_Kit_Fits_02_07_Impreza_04_08_Forester_XT_01_ssdt Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT
      Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT
      Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT
      Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT
      Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT

      Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT
      Perrin 3 Turbo Inlet Black Hose Kit 02-07 Subaru Impreza / 04-08 Forester EJ. Only Fits Turbos With 3 Turbos. (1) PERRIN Subaru 3 Inlet Hose. (1′) 1/2 Fuel hose. (1) PERRIN License Plate Frame. 3 TURBO INLET HOSE. Silicone technology allows us to design a turbo inlet hose that is better in all aspects than the OEM part and increases your engines horsepower and performance. The PERRIN inlet hose is perfectly smooth on the inside and has a significantly larger internal diameter than the OEM part. The increased air flow by removing the pleats found in the OEM hose makes more horsepower, decreases turbo spool time, improves acceleration and increases throttle response. The PERRIN 3 inlet hose is reinforced with a stainless steel support wire that is embedded within the silicone layers. The support adds rigidity to the hose and prevents collapse when used with restrictive filter elements and large turbo applications running extreme amounts of boost. The item “Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT” is in sale since Friday, December 19, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “theaftermarketshop” and is located in Madison Heights, Michigan. This item can be shipped worldwide.
      • Years 1: 02 03 04 05 06 07 Impreza Turbo Inlet Hose
      • Years 2: 04 05 06 07 08 Forester 2.5 Turbo Hose
      • Interchange Part Number: Perrin Turbo Hose PSPINT410BK
      • Type: Upgrade Kit
      • Surface Finish: Black
      • Manufacturer Part Number: PSP-INT-410BK
      • Other Part Number: Subaru Forester WRX Turbo Inlet Hose Kit
      • Brand: PERRIN Performance
      • Fitment Type: Performance/Custom
      • Warranty: Yes

      Perrin 3 Turbo Inlet Black Hose Kit Fits 02-07 Impreza / 04-08 Forester XT

      Tags: , , , , , , , , ,

    « Previous Entries