• Category:

    • glow Comments Off
      Glow_Up_U0026_Pack_With_Me_For_Our_Babymoon_Toddler_Baby_Travel_Hacks_For_Long_Haul_Flights_01_zkdv

      Tags: , , , , , , , , , ,

    • long Comments Off
      LONG_SHAFT_Ready_Built_Gibson_Epiphone_Les_Paul_Wiring_Upgrade_Loom_Harness_Kit_01_wcr LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit

      LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit
      Bloodstone Guitar Works specialise in custom building a guitar to your specification, one that you can have the ultimate confidence in its feel, tone and playability and truly cherish. We also produce our own range of Handwound pickups and Handwired wiring looms and undertake upgrades, repairs and setups. LONG SHAFT Ready Built up Gibson Les Paul Wiring upgrade / Wiring Loom. Long Shaft Length (18mm thread) – See other listing for cheaper 10mm option. These wiring looms are Individually hand-wired from UK-sourced genuine parts using 22 gauge Gavitt vintage cloth covered wire. A drop in replacement and a great performance and reliability upgrade for all Les Pauls. Top quality matched components are used throughout and the “float wire” method is adopted where all wires are pulled tight and elevated so they make no contact with the control /baseplate. It takes a little longer to build but is definitely worth the effort to maximise performance. Matched CTS USA Custom Audio EVERSE Taper 500K or 250K (You choose) Split Shaft Volume & Tone Potentiometers – smooth linear volume and tone change (no bunching or on/off effect). 0.022uF Sprague “Orange Drop” Tone Capacitors – removes the thinness and harshness inherent with budget capacitors. Separate “treble bleed” mod for both pickups – no muddiness of tone when reducing the volume knob. Premium quality SwitchCraft / High quality import and No Switch option. Bridge earth wire supplied with heatshrink tube to twist join with exiting earth, solder and insulate. Easy to follow colour coded wiring diagram. Fully soldered together and includes all nuts screws and washers ready to fit to your guitar. Atched in-house to within 10 Ohms (CTS pots tolerance is +/- 20% so a 250K pot can vary from 200-300 Ohms). Now using the 715p version which is sonically superior to the commonly used 225p. This item is in the category “Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “bloodstoneguitarworks” and is located in this country: GB. This item can be shipped to United Kingdom.
      • Jack socket type: Switchcraft 3/8\
      • Switch type: SwitchCraft Switch Fitted
      • To Fit: Electric Guitar
      • Country/Region of Manufacture: United Kingdom
      • Brand: Gibson
      • Type: Loom

      LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit

      Tags: , , , , , , , , , ,

    • upgrade Comments Off
      Upgrade_wiring_kit_Fits_Gibson_Les_Paul_3_Pick_Up_Long_Shaft_Pots_with_switch_01_pxlo Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch

      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Welcome to Tone Man Guitar. Give your guitar that Classic Les Paul Tone. Warmth, body and fuller tone. K40Y-9 Vintage Russian PIO Caps. It will make a difference! Please read the details below. The standard wiring for 3 humbucker guitar is Bridge / Bridge & Middle / Neck. This kit has 1 Master Tone and 3 Volume controls. What’s In The Kit. Bourns 500K Potentiometers Long-Split-Shaft Coarse Spline, Audio Taper. 1 Master Tone 3 Volume. Switchcraft 3-Way Short Toggle switch Pre-assembled Gavitt Braided Shield Wiring with black tip. Shrink Tubing for each braided wire in cavity. 033uf PIO Vintage Aged Tone Cap (Qty 1 cap). Switchcraft ¼ inch Output Jack. Assembly Template Hard Board. All assembled except for final hook up of ¼ inch output jack & Pickups connection. 50s Wiring diagram and easy to read step by step installation instructions. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you are not sure whether your guitar uses short (3/8″) or long (3/4″) shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul’s, Epiphone’s, SG’s use short shafts. This kit uses Long Shaft. And as a general rule will fit most USA made Gibson Les Paul’s manufactured after 1977. Note: If you have an imported guitar e. You may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50’s and 60’s guitars is what I try to achieve. I guarantee the best parts and workmanship. I believe in good communication. We Want You To Be 100% Satisfied! I also offer other parts. O caps, pots and various pre-assembled vintage wiring harnesses for Les Paul’s, Stratocasters and others. The item “Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch” is in sale since Thursday, April 4, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • To Fit: Electric Guitar
      • Country/Region of Manufacture: United States
      • MPN: Does Not Apply
      • Custom Bundle: No
      • Brand: Tone Man Guitar
      • Modified Item: No
      • Non-Domestic Product: No
      • Type: Prewired Upgrade Les Paul Kit

      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch

      Tags: , , , , , , , , ,

    • jeep Comments Off
      Jeep_Wrangler_Rough_Country_Long_Arm_Upgrade_Kit_For_4_6_Lift_1997_2006_Tj_Review_U0026_Install_01_kc

      Tags: , , , , , , , , ,

    • rough Comments Off
      Rough_Country_Long_Arm_Upgrade_Kit_fits_1984_2001_Jeep_Cherokee_XJ_01_yju Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ

      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Extreme travel long arms keep optimum alignment and give optimum articulation. Adjustable Lower control arms feature high clearance design and Clevite brand OEM style rubber bushings. Flex joints feature a massive 2.5″ diameter body and 1.25″ thread. Heavy Duty 0.25 thick crossmember. Upper joints pivot up to 20 degrees. Lower joints pivot up to 35 degrees. Doesn’t Fit w/ 2.8L V-6 or diesel engines. Doesn’t Fit 87-89 w/ Peugeot manual transmissions. Items Included: FRONT: Adjustable upper control arms – Adjustable lower control arms – Long arm Crossmember – Transfer case skid plate – Hardware. Fits w/ NP242 transfer case. FRONT: Adjustable upper control arms – Adjustable lower control arms – Long arm Crossmember – Transfer case skid plate – Hardware. A lot of things can happen on the road less traveled, and Rough Country has you covered! We’re confident in our high quality products so we’re giving you more peace of mind and more bang for your buck! We will replace your defective item at no cost to you! Break a component while off-roading? We’ll replace it! Include all original items in the Return. 98% of all orders placed leave our warehouses the same day (not including weekends & holidays). Even with our huge inventory, we may run out of an item. If any questions please contact Rough Country prior to placing your order. The item “Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ” is in sale since Tuesday, September 24, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Control Arms & Parts”. The seller is “roughcountry” and is located in Dyersburg, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Reunion, Viet nam, Uruguay.
      • Brand: Rough Country
      • Manufacturer Part Number: 61600U
      • Part Type: Suspension Control Arm
      • Interchange Part Number: 61600U
      • Placement on Vehicle: Front
      • Control Arm Construction: Stamped
      • Warranty: Lifetime
      • Fitment Type: Performance/Custom
      • Included Hardware: Yes
      • Greasable or Sealed: Greasable
      • Adjustable: Yes
      • California Prop 65 Warning: Cancer Reproductive

      Rough Country Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ

      Tags: , , , , , , ,

    • rough Comments Off
      Rough_Country_X_Flex_Long_Arm_Upgrade_Kit_fits_1984_2001_Jeep_Cherokee_XJ_01_rk Rough Country X-Flex Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ

      Rough Country X-Flex Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ
      Rough Country 61600U – X-Flex Long Arm Upgrade Kit (fits) 4-6 Lifts (fits) Jeep 84-01 Cherokee XJ 4WD 86-92 Comanche, Unbeatable value and the best price in the market! Aggressive appearance Increased ground clearance HD 0.25 thick crossmember Lower control arms feature high clearance design Extreme travel long arms keep optimum alignment and give optimum articulation. X-Flex control arm Clevite brand OEM style rubber bushings. Flex joints feature a massive 2.5″ diameter body and 1.25″ thread. Upper joints pivot up to 20 degrees. Lower joints pivot up to 35 degrees. (fits) models with NP242 transfer case. Does Not fit models with 2.8L V-6 or diesel engines. Does Not fit 87-89 models with Peugeot manual transmissions. Includes – FRONT: Adjustable upper control arms Adj. Includes – FRONT: Adjustable upper control arms Adjustable lower control arms Long arm Crossmember Transfer case skid plate Hardware. Increase Ground Clearance for on and off-road obstacles. HD 0.25 thick crossmember. Lower control arms feature high clearance design , Extreme travel long arms keep optimum alignment and give optimum articulation. FRONT: Adjustable upper control arms – Adjustable lower control arms – Long arm Crossmember – Transfer case skid plate – Hardware – REAR. Fits w/ NP242 transfer case. Doesn’t Fit w/ 2.8L V-6 or diesel engines. Doesn’t Fit 87-89 w/ Peugeot manual transmissions. Wheel alignment, steering system, suspension, and driveline systems must be inspected by a qualified, professional mechanic at least every 3,000 miles. The item “Rough Country X-Flex Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ” is in sale since Friday, February 8, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “roughcountry” and is located in Dyersburg, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
      • Brand: Rough Country
      • Manufacturer Part Number: 61600U
      • Interchange Part Number: 61600U
      • Warranty: Lifetime
      • Fitment Type: Performance/Custom
      • Included Hardware: Yes
      • California Prop 65 Warning: Cancer Reproductive
      • Features: Rough Country X-Flex Long Arm Upgrade Kit (fits) 1984-2001 Jeep C
      • Vehicle Fitment: 1984-2001 4WD Jeep Cherokee XJ
      • eBay Product Type: Control Arms
      • Additional Features: Fits w/ NP242 transfer case.||Doesn’t Fit w/ 2.8L V-6 or diesel e
      • Suspension Grade: Performance

      Rough Country X-Flex Long Arm Upgrade Kit (fits) 1984-2001 Jeep Cherokee XJ

      Tags: , , , , , , , ,