• Category:

    • comp Comments Off
      COMP_Cams_Ls_Oem_Rocker_Arm_Trunion_Kit_Upgrade_Retro_Fit_13702_KIT_01_zep COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)

      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)
      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT). Product image may look slightly different from actual product appearance. Ls Oem Rocker Arm Trunion Kit. Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit. Upgrades stock LS series rocker arms w/ captured roller trunnions for modified applications. NASCAR spec LS engine proven. Increases stability & stiffness. Our Best Price Guarantee is part of our commitment to always offer you the lowest possible price. Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. How do I request a Price Match? You can do that via the eBays make offer option. Simply present proof of the competitors advertised price in the message section. Once your price match request is verified and the competitors product is confirmed as being in stock and available for immediate sale we will happily accept your offer. Add to watch list. Enter your offer in the input box provided. You have the option adjust the order quantity. More than 10 available. What are the exclusions? Offers which include cash back or bonus stock. Offers that are only available to trade, special event, club or membership offers. Clearance, seconds, refurbished, ex-demonstration or display products. Products supplied through unauthorised distributors or delivered directly to customers from an overseas distributor. Products with pricing set significantly lower than the recommended retail price or market value. Do you accept offer for bulk deal? What proof do I need when requesting a Best Price Guarantee? Please provide a link to the lower priced product. Can I Cancel a Best Offer? In some cases, you can retract or cancel a Best Offer, for example if you accidentally entered the wrong offer amount. You’ll need to fill out a Best Offer cancellation form. Can I make more than one offer? If we reject your offer, you can make another one (up to 3 on most items). Bank Transfer Below is our bank transfer details. Only unused products are eligible for return. Items must be completely repackaged in the original packaging. The customer is responsible for all charges involved in returning the items. Damaged items must be completely repackaged in the original packing and we will arrange for the return and replacement. How to make an offer. The item “COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)” is in sale since Tuesday, January 8, 2019. This item is in the category “Vehicle Parts & Accessories\Other”. The seller is “rolan-australia” and is located in Seven Hills. This item can be shipped worldwide.
      • Brand: COMP Cams
      • Manufacturer Part Number: CO13702-KIT
      • Model: Ls Oem Rocker Arm Trunion Kit
      • Warranty: 12 Months
      • Each quantity contains: 1 item

      COMP Cams Ls Oem Rocker Arm Trunion Kit Upgrade Retro-Fit (13702-KIT)

      Tags: , , , , , ,

    • competition Comments Off
      Competition_Cams_13702_KIT_LS1_Rocker_Arm_Retro_Fit_Trunion_Upgrade_Kit_01_of Competition Cams 13702-KIT LS1 Rocker Arm Retro-Fit Trunion Upgrade Kit

      Competition Cams 13702-KIT LS1 Rocker Arm Retro-Fit Trunion Upgrade Kit
      Books, Videos, & DVDs. Oils, Fluids & Chemicals. Trailers Winches & Towing. Add to Favorite Sellers. Sign up to Newsletter. View more great items. Competition Cams 13702-KIT LS1 Rocker Arm Retro-Fit Trunion Upgrade Kit. SK Speed Part Number. LS1 Rocker Arm Retro-Fit Trunion Upgrade Kit; Incl. Trunion/Caged Roller Bearings; Steel Alloy. Stiffer More Durable 8620 Steel Alloy Material. Designed For Circle Track/Drag Racing. Tested In NASCAR GM LS Spec Engine Series. For more than 35 years, the COMP Cams(R) mission has never changed: to produce the highest-performing products possible, provide customers with superior service, and to lead the industry in technological development. While the COMP Performance Group(TM) has grown to multiple companies and hundreds of employees, we still retain the competitive spirit and desire to be the very best that has positioned COMP Cams(R) as the absolute leader in valve train components. COMP Cams manufactures truly superior hydraulic and solid flat tappet, hyd and mechanical roller, and overhead camshafts for everything from OE replacement to full race, designed and manufactured using cutting-edge technology and the finest engineering in the industry. Whether your engine is naturally aspirated, or you run nitrous, or a supercharger or turbo, our cams make more horsepower than any other. Looking for that ultimate hard-hitting muscle car idle? Check out our aggressive new Thumpr Cams. Match our camshafts up with our competition-grade lifters, valve springs, timing sets, and other supporting components, and you’ll experience the ultimate in race-winning reliability! Starting from a small garage in the 50’s to the beautiful new 6000sq ft showroom we have today, customer service has always been a top priority. We can only process Domestic credit cards. Which carrier is used depends on your location. We will choose the carrier that will deliver the quickest for your location. We can not and will not declare an item as a gift. We strive for accuracy, however, there could be discrepancies on the manufacturers end with listing applications. PLEASE MESSAGE US WITH ANY QUESTIONS OR CONCERNS ABOUT YEAR/MAKE/MODEL INFO IF YOU NEED! That said, we will assist in processing a claim. In either case, we will assist in the process. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Competition Cams 13702-KIT LS1 Rocker Arm Retro-Fit Trunion Upgrade Kit” is in sale since Friday, January 30, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “espeedshop” and is located in Lindenhurst, New York. This item can be shipped worldwide.
      • Brand: COMP Cams
      • Manufacturer Part Number: 13702-KIT
      • Country/Region of Manufacture: United States

      Competition Cams 13702-KIT LS1 Rocker Arm Retro-Fit Trunion Upgrade Kit

      Tags: , , , , , ,

    • rocker Comments Off
      Rocker_Arms_with_Bushing_Style_Upgraded_Trunion_Kit_Gen_V_LT1_LT4_LV3_L83_L86_01_rp Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86

      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit. Gen V LT1 LT4 LV3 L83 L86. Send in your reusable Gen V Rocker arms and. 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade. The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O. Or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion. These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion’s center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. Bronze Bushing Style Bearing. The item “Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86″ is in sale since Tuesday, September 11, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam, Antigua and barbuda, Aruba, Belize, Dominica, Saint kitts and nevis, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Iceland, Jordan, Cayman islands, Sri lanka, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Uruguay.
      • Interchange Part Number: trunnion, Retro-Fit,
      • Manufacturer Part Number: A3100+74300 Installed
      • Other Part Number: trunnion
      • Brand: Michgian Motorsports

      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86

      Tags: , , , , ,

    • comp Comments Off
      Comp_Cams_LS_OE_Rocker_Arm_Retro_Fit_Roller_Trunion_Upgrade_Kit_13702_KIT_LSX_01_ghv Comp Cams LS OE Rocker Arm Retro Fit Roller Trunion Upgrade Kit 13702-KIT LSX
      Comp Cams LS OE Rocker Arm Retro Fit Roller Trunion Upgrade Kit 13702-KIT LSX
      Comp Cams LS OE Rocker Arm Retro Fit Roller Trunion Upgrade Kit 13702-KIT LSX

      Comp Cams LS OE Rocker Arm Retro Fit Roller Trunion Upgrade Kit 13702-KIT LSX
      COMP CAMS ROCKER ARM TRUNION UPGRADE KIT FOR GM LS ENGINES Part # 13702-KIT Fits: LS1 LS2 LS3 LS6 LS7; 4.8 5.3 6.0 6.2 7.0 Liter Engines These Comp Cams Trunion Upgrade Kits upgrade the stock LS Series Rocker arms with captured roller trunion bearings for modified,, high RPM and high horsepower applications. NASCAR Spec LS Engine Proven! The kit includes all parts to complete the conversion. We do offer UPS 3 Day Air and 2 Day Air for Upgraded Guaranteed Deliver. The item “Comp Cams LS OE Rocker Arm Retro Fit Roller Trunion Upgrade Kit 13702-KIT LSX” is in sale since Friday, January 22, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “fap_engineparts” and is located in Ontario, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Bahamas, Viet nam.
      • Manufacturer Part Number: 13702-KIT
      • Other Part Number: 13702KIT
      • Brand: Comp Cams
      • Fitment Type: Performance/Custom

      Comp Cams LS OE Rocker Arm Retro Fit Roller Trunion Upgrade Kit 13702-KIT LSX

      Tags: , , , , , , ,

    • rocker Comments Off
      LS1_Rocker_Arms_with_Upgraded_Trunion_Kit_Installed_fits_4_8_5_3_5_7_6_0_LS2_LS6_01_fs LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6

      LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6
      Michigan Motorsports LS Rocker Arms with Upgraded Trunion Bearings Installed. See our other listing if you want upgraded bolts included. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor. We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure. Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 4.8/5.3/5.7/6.0/ Engines This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit. Install the upgraded rocker arms to the cylinder heads using socket head cap screws. Be sure to rotate the trunion so that the flat recess side of the trunion’s center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. We are Michigan Motorsports. Our mission is to provide the highest quality, fairest priced auto and diesel parts, backed by excellent customer service resulting in the ultimate shopping experience. Some of our top products include LS Rocker Arms, Trunion Kits, Extension Harnesses, Coil Relocation Kits, and various other LS Engine Swap items. Visit our online store for all your automotive and diesel part needs! The item “LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6″ is in sale since Friday, November 18, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Bahamas, Viet nam.
      • Interchange Part Number: trunnion
      • Manufacturer Part Number: 25100-no bolts
      • Brand: Michigan Motorsports

      LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6

      Tags: , , , , ,