• rocker Comments Off
    Rocker_Arms_with_Bushing_Style_Upgraded_Trunion_Kit_Gen_V_LT1_LT4_LV3_L83_L86_01_rp Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
    Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
    Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
    Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86

    Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
    Rocker Arms with Bushing Style Upgraded Trunion Kit. Gen V LT1 LT4 LV3 L83 L86. Send in your reusable Gen V Rocker arms and. 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade. The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O. Or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion. These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion’s center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. Bronze Bushing Style Bearing. The item “Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86″ is in sale since Tuesday, September 11, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam, Antigua and barbuda, Aruba, Belize, Dominica, Saint kitts and nevis, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Iceland, Jordan, Cayman islands, Sri lanka, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Uruguay.
    • Interchange Part Number: trunnion, Retro-Fit,
    • Manufacturer Part Number: A3100+74300 Installed
    • Other Part Number: trunnion
    • Brand: Michgian Motorsports

    Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86

    Tags: , , , , ,

  • fits Comments Off
    Fits_16_18_Chevy_Camaro_1LE_Style_Front_Bumper_Cover_OE_Style_Rear_Diffuser_PP_01_bkwe Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP

    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP
    1LE Style Front Bumper & OEM Style Rear Diffuser. 1x Front Bumper w/ Grille 1x Rear Diffuser w/ Muffler Tips. DOMESTIC (LOWER 48 STATES). Please Feel Free To Place Your Order! Please inspect your order upon receipt. Most of our products are direct from distributor and are intended for jobber purpose, so they may not come with instruction manual. Professional mechanic are recommended for installation. This can avoid many problems that can often be found with an inexperienced installer of aftermarket products. All Sales are final, NO return unless it’s defect. All defect item must be reported and return within 30 days after receiving the product. All emails are to be answered within 24 hours except Sat and Sun. The item “Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP” is in sale since Tuesday, March 26, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “advancetuning” and is located in La Puente, California. This item can be shipped worldwide.
    • Type: Bumper Part
    • Brand: advancetuning
    • Manufacturer Part Number: ADV-BKP-CC161LE-PP&BLR-CC16OE-PP
    • Interchange Part Number: Replacement Conversion Upgrade Fascia Grille Kit Air Dam Chin Spo
    • Other Part Number: OEM Factory 23264826 84211959 84211958 84280756 84209675 84209673
    • Placement on Vehicle: Front/Rear
    • Surface Finish: Unpainted
    • Color: Unpainted
    • Warranty: Yes
    • Fitment Type: Performance/Custom
    • Material: Polypropylene (PP)
    • Genuine OEM: OEM Factory 23264826 84211959 84211958 84280756 84209675 84209673

    Fits 16-18 Chevy Camaro 1LE Style Front Bumper Cover OE Style Rear Diffuser PP

    Tags: , , , , , , , , ,

  • ford Comments Off
    Ford_Capri_Mk1_Mk2_340mm_Rally_Style_Alcantara_Steering_Wheel_Boss_Fitting_Kit_01_nb Ford Capri Mk1 Mk2 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit
    Ford Capri Mk1 Mk2 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit

    Ford Capri Mk1 Mk2 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit
    Vintage Warehouse 65 Classic 13 Retro Steering Wheel Kit. Here we have a 340mm Deep dished Black Alcantara. Wheel for your classic Ford. Fits in conjunction with the tailored 6 Hole Boss kit finished in satin black Including a black plastic finIsh horn push and fitting kit Kit Contents – 340mm Black Deep dished Steering Wheel Tailored Car Specific Steering Wheel Boss Kit Standard Plastic Wrinkle Finish Black Horn push & Fitting Bolt Kit. The item “Ford Capri Mk1 Mk2 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit” is in sale since Wednesday, March 7, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Steering Wheels”. The seller is “vintagewarehouse65uk” and is located in Bromsgrove. This item can be shipped to all countries in Europe, all countries in continental Asia, United States, Canada, Australia.
    • Other Part Number: CCO1101
    • Classic Car Part: Yes
    • Manufacturer Part Number: FORD CAPRI STEERING WHEEL KIT
    • Brand: VW65
    • Reference OE/OEM Number: FORD ESCORT MK1 MK2 STEERING WHEEL KIT
    • Colour: Black
    • Type: Sports Steering Wheel
    • Material: Black Alcantara
    • Finish: Black Alcantara

    Ford Capri Mk1 Mk2 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit

    Tags: , , , , , , , , ,

  • golf Comments Off
    Vw_Golf_Mk1_Gti_340mm_Rally_Style_Alcantara_Steering_Wheel_Boss_Fitting_Kit_01_hrz Vw Golf Mk1 Gti 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit
    Vw Golf Mk1 Gti 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit

    Vw Golf Mk1 Gti 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit
    Vintage Warehouse 65 Classic 13 Retro Steering Wheel Kit. Here we have a 340mm Deep dished Black Alcantara. Wheel for your VW. Fits in conjunction with the tailored 6 Hole Boss kit finished in satin black Including a black plastic finIsh horn push and fitting kit Kit Contents – 340mm Black Deep dished Steering Wheel Tailored Car Specific Steering Wheel Boss Kit Standard Plastic Wrinkle Finish Black Horn push & Fitting Bolt Kit. The item “Vw Golf Mk1 Gti 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit” is in sale since Wednesday, March 7, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Steering Wheels”. The seller is “vintagewarehouse65uk” and is located in Bromsgrove. This item can be shipped to all countries in Europe, all countries in continental Asia, United States, Canada, Australia.
    • Other Part Number: CCO1101
    • Classic Car Part: Yes
    • Manufacturer Part Number: VOLKSWAGEN GOLF MK1 STEERING WHEEL KIT
    • Brand: VW65
    • Reference OE/OEM Number: FORD ESCORT MK1 MK2 STEERING WHEEL KIT
    • Colour: Black
    • Type: Sports Steering Wheel
    • Material: Black Alcantara
    • Finish: Black Alcantara

    Vw Golf Mk1 Gti 340mm Rally Style Alcantara Steering Wheel & Boss Fitting Kit

    Tags: , , , , , , , ,

  • hawke Comments Off
    HAWKE_Full_Front_Rear_SVR_Style_Body_Kit_Bumper_Upgrade_fits_RANGE_ROVER_EVOQUE_01_yzox HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE
    HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE
    HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE
    HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE

    HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE
    Range Rover Grilles, Vents, Parts & Accessories. Side Steps / Running Boards. > Range Rover Sport (05-09). > Range Rover Sport (10-13). Bentley GT/C & Flying Spur. Range Rover Fitting Kit. Range Rover Sport L494. TPi Wheel Fitting Accessories. TPi Nut & Bolt Covers. VW Transporter T5 & T6. Browse the shop for the best quality parts. HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE. Quality and service means everything to us. Items dispatched same day if ordered before 3pm. Part Number BKJTCL538SVR1 Description – Ultimate styling for the Evoque. Fantastic SVR styling conversion, giving it a sportier, stealthier look. Facelift your vehicle. Supplied ready to paint to your body colour and fit to your vehicle. Beware of cheap inferior quality products available elsewhere. Fitment – Range Rover Evoque. What’s Included – Superior Quality PU Front Bumper. Superior Quality PU Rear Bumper and Skid Plate. Superior Quality PU Lower Mesh Grilles and Valance. Quad Exhaust Trims. Notes We recommend that you use a professional body shop to fit this kit. Supplied ready to paint. Vehicle is for display purposes only. Displayed with HAWKE Harrier 22 which.. Ultimate styling for the Evoque. Fantastic SVR styling conversion, giving it a sportier, stealthier look. Supplied ready to paint to your body colour and fit to your vehicle. Beware of cheap inferior quality products available elsewhere. Superior Quality PU Front Bumper. Superior Quality PU Rear Bumper and Skid Plate. Superior Quality PU Lower Mesh Grilles and Valance. We recommend that you use a professional body shop to fit this kit. Displayed with HAWKE Harrier 22 which compliment the kit perfectly and are available in our shop. The parts we provide are replacement compatible pattern spares. HAWKE do not represent any OEM in any way and are a fully independent company. Any reference to OEM names or OEM product identification descriptions/model numbers is for identification only and does not indicate that it is an OEM part unless otherwise confirmed as such. On receipt of cleared funds, we will dispatch your goods the same day. We use Interlink Express for our NEXT DAY UK mainland deliveries. We can cater for either express or economy deliveries overseas. Our experience is that Europe by road is the most cost effective way to send. We will do our utmost to track your order for you. Please help us to help you achieve this. We are nice guys and are here to help! Fraudsters will be dealt with through the courts. Retention of title remains with sixonetwo until goods are paid for in full. Full terms and conditions are available on request. In the unlikely event there is a problem with an item bought from us, we’re on hand to help. We are keen to help and get the job right. This section is designed to help you understand what jobs our products do. We’re on hand to help. When fitting Spacers to your car, you’ll need to extend the length of the bolt from the standard length to: standard length + spacer width. For example if your car takes a standard 28mm bolt and you use a 20mm spacer, you’ll need to bolt the spacers on with 48mm long bolts. This needs to be an accurate measurement with a digital gauge. We’ll happily do this for you if you bring a wheel to us. If the bore is very close to the hub size of your car, then it may be that rings are not available. In this case it’s often possible for the wheel bores to be precision machined to a larger size (at additional cost) for which there are rings available. If you’re in any doubt, give our experts a call. TPi locks are made to fit both your vehicle and your wheels. For example: tapered (cone shaped), radius (ball shaped) or mag seat (flat seated) If you’ve changed your wheels from the standard factory ones, then there’s every possibility the nuts or bolts will need to be different – and the same applies to the locks. The diagrams to the right should help to explain the difference. POLARISED NUTS & BOLTS. TPi Race nuts and bolts are available in tapered fitment only. Please check below for the correct fitment for your car. Don’t use the wrong seating type for your wheels. Don’t take chances with your safety. These must be tightened with a bar and not by a nut gun, which will damage the finish. SD TUNER NUTS & BOLTS. You need these if your car requires nuts, and the bolt pockets on your wheels are too small for a standard socket. The same applies if your car requires bolts, and the bolt pockets on your wheels are too small for a standard socket. TPi bolts are made to fit both your vehicle and your wheels. For example: tapered (cone shaped), radius(ball shaped) or mag seat (flat seated) If you’ve changed your wheels from the standard factory ones, then there’s every possibility the bolts will need to be different – and the same applies to the locks. If your bolt pockets are smaller than standard and too small to accept a standard socket, then. Youll need our spline tuner bolts. We can guide you towards to correct fitments for your car and wheels. TPi nuts and locks are made to fit both your vehicle and your wheels. Also that your wheels have tapered seated (cone shaped) bolt pockets. If you’ve changed your wheels from the standard factory ones, then there’s every possibility the nuts or bolts will need to be different – and the same applies to the locks. Youll need our SD tuner nuts. NUT & BOLT COVERS. Our Premium quality plastic wheel nut/bolt covers to hide the decayed original ones on your car. Fit snugly over the top to improve the look of your wheels. These will not fit locking wheel nuts/bolts. You may also be interested in. HAWKE 3D Chrome & Red Boot / Bonnet Letters Badges fits Range Rover Sport 2007. HAWKE Falkon Alloy Wheels 22 5-120 GUNMETAL x 4 fit VOGUE L322 2013+. HAWKE Black Exhaust Tips Muffler For Range Rover Sport 2010 L320. 20 HAWKE Chayton Alloy Wheels x 4 Matt Black 20×8.5 5-120 et40 SPORT L320 10-13. The item “HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE” is in sale since Tuesday, October 16, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Other Exterior Styling”. The seller is “sixonetwo_ltd” and is located in GB. This item can be shipped to United Kingdom.
    • Brand: Hawke
    • MPN: BKJTCL538SVR1
    • Manufacturer: Hawke
    • Manufacturer Part Number: BKJTCL538SVR1
    • Reference OE/OEM Number: BKGBTL538GBA1

    HAWKE Full Front Rear SVR Style Body Kit Bumper Upgrade fits RANGE ROVER EVOQUE

    Tags: , , , , , , , , , , ,

  • lockheed Comments Off
    New_Lockheed_Style_Upgraded_Brake_Servo_Kit_Mgb_1962_1974_Retro_Fit_1_9_Boost_01_eyct New Lockheed Style Upgraded Brake Servo Kit Mgb 1962 -1974 Retro Fit 1.9 Boost
    New Lockheed Style Upgraded Brake Servo Kit Mgb 1962 -1974 Retro Fit 1.9 Boost
    New Lockheed Style Upgraded Brake Servo Kit Mgb 1962 -1974 Retro Fit 1.9 Boost

    New Lockheed Style Upgraded Brake Servo Kit Mgb 1962 -1974 Retro Fit 1.9 Boost
    HERE IS A BRAND NEW LOCKHEED TYPE REMOTE BRAKE SERVO WITH FITTING KIT , THIS KIT INCLUDES A HIGHER BOOST SERVO 1.9 RATHER THAN THE STANDARD 1.65 WHICH WILL GIVE A BETTER BOOST RATIO TO AID BETTER BRAKING EFFICIENCY. IT FITS THE ORIGINAL BOLT HOLES IN THE BULK HEAD OF CHROME BUMPER MGB S. 2 X BRAKE PIPES. 1 X SERVO VACUMN HOSE PLUS CLIPS. 1 X MANIFOLD UNION INC VALVE. 1 X NUTS AND BOLTS TO FIT KIT. ANY QUERIES PLEASE RING 01945 700500. THE COST QUOTED IS FOR MAINLAND ENGLAND AND WALES. Hive, we specialise in MGB’s and Midgets, please call on 01945 700500, for any information. FIND US ON THE INTERWEBB. The item “NEW LOCKHEED STYLE UPGRADED BRAKE SERVO KIT MGB 1962 -1974 RETRO FIT 1.9 BOOST” is in sale since Wednesday, January 10, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Brakes & Brake Parts\Brake Servos”. The seller is “mgbhiveltd” and is located in Wisbech. This item can be shipped to United Kingdom.
    • Brand: Lockheed TYPE
    • Manufacturer Part Number: MG
    • Other Part Number: MG
    • Classic Car Part: Yes
    • Part Manufacturer: MG
    • Manufacturer: MG
    • Interchange Part Number: MG

    New Lockheed Style Upgraded Brake Servo Kit Mgb 1962 -1974 Retro Fit 1.9 Boost

    Tags: , , , , , ,

  • range Comments Off
    Range_Rover_Evoque_Svr_Style_Bodykit_Upgrade_Kit_2011_2995_Painted_Fitted_01_puig Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted

    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted
    RANGE ROVER EVOQUE SVR STYLE BODY KIT 4X4 SUV UPGRADE SPORT 201102015. Range Rover Evoque SVR Style Body Kit. Everything in the styling pack has been manufactured to transform your standard Range Rover Evoque into an enhanced SVR style performance model. See product description below for more details. RANGE ROVER EVOQUE L538 SVR STYLE BODY KIT. SVR Style Body Kit. Front Bumper SVR Style is equipped with the front grille, licence plate support and support for PDC sensors. Rear Bumper SVR Style is equipped with double air outlet diffuser and exhaust tips. Front and rear bumper are equipped with PDC holders. Grey Silver Supercharged Edition Single Frame. Styling Pack consists of. The bumpers are made out of OEM quality Polypropylene (PP) plastic, equipped with PDC holes, with lower central & side air intakes. Exhaust tips made of high-quality 304-grade stainless steel. All style parts have been primed and ready for the painting process. This kit is not suitable for. Range Rover Evoque (2011-onwards) equipped Range Rover Camera System. Land Rover Range Rover Evoque L538 2015+. The product is without E-mark/ABE/TUV. THIS BODY KIT IS CRAFTED OUT OF HIGH-QUALITY PP PLASTIC. Have a peace of mind and let us deal with the conversion from start to finish, we use a state of the art body shop to carry out all the work. Please message our team. For a package price and trade discount, please message our team. If you require any of the parts individually supplied or fitted, please message our team. BARUGZAI 22 ALLOY WHEELS ARE ALSO AVAILABLE IN A RANGE OF 6 DIFFERENT COLOURS, PLEASE SEE OUR OTHER LISTINGS ON OUR STORE OR MESSAGE OUR SUPPORT TEAM FOR FURTHER INFORMATION. We use Professional Installers, Painters and Panel technicians by an experienced custom body shop. The work is carried out to a very high standard and manufacture approved paints are used in high tech Spray Booths. If you have any questions about the fitting of this Styling Pack, please message our team. For Information on International Sales. Cleared funds being received. Please note this does not include weekends and public holidays. Enkahnz Exquisite Car Parts are not liable for any damages or missing parcels that occur during transit. All packages must be checked upon arrival for damages. If these instructions are not followed, then any claim for damages will be void. “Aftermarket parts” are divided into two categories: replacement parts and accessories. Replacement parts are automotive parts built or re-manufactured to replace OE parts. Accessories are parts made for comfort, convenience, performance or customization, and are designed for add-on after the original sale of the motor vehicle. Most body kits are made of fiberglass, chips and cracks may need to be repaired prior to installation – this is normal with all fiberglass parts. It is the customer’s responsibility to know all of the work involved in the installation process. Fibreglass kits are not direct bolt-ons and may require minor adjustments, curing and prepping prior to painting. We recommend that the customer seek an experienced custom shop to do the installation and refinishing of fiberglass products, which is experienced in this area and knows all variables to do with installation of carbon fibre, grp, fibreglass products. On some parts additional fastening clips, screws, bonding agents maybe required. We do not hold any responsibility for the damage in transit. Thanks for your understanding. Subscribe to our newsletter. The item “RANGE ROVER EVOQUE SVR STYLE BODYKIT UPGRADE KIT 2011+ £2995 PAINTED & FITTED” is in sale since Wednesday, February 6, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Full Body Kits”. The seller is “enkahnzexquisitecarparts” and is located in Bradford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Brazil, Japan, Israel, Hong Kong, Norway, Indonesia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand.
    • Colour: Primed
    • Material: Polypropylene (PP)
    • Manufacturer Part Number: n/a
    • Placement on Vehicle: Front
    • Brand: n/a

    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £2995 Painted & Fitted

    Tags: , , , , , , ,

  • 15-17 Comments Off
    15_17_For_Honda_Fit_Complete_Front_Bumper_Kit_Lower_Grille_Foglamp_Factory_Style_01_bshq 15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style

    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style
    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style. Direct Replacement Front Bumper Kit. Upgrade your Honda’s appearance with our Replacement Bumper Cover Kit. Our bumper kits are made from durable polypropylene which retains it’s shape better when compared to polyurethane components. Comes unpainted so that you can color match it to your vehicle’s OE paint. Don’t worry about upgrading your Fog lights elsewhere because we already include that in this kit! Factory Style Replacement Bumper Kit -Includes Fog Lamp Bezels. Includes Honeycomb Lower Grille. Tow Hook Cover not Included – Reuse factory cover. Notes: License plate mounts designed for Euro plates. Fog Lights -Includes 2 x H8 Bulbs, 35W -Includes Wire and Switch Harness -Interchangeable Part # 33901-TY0-305, 33951-TY0-305. Front Bumper Cover – Polypropylene. Lower Grille – Polypropylene. Fog Lights Lens – Polycarbonate. Lower Grille – Black. Fog Light Lens – Clear. What’s in the box. 1 x Complete Front Bumper Kit 1 x Pair of Fog Lights (Left, Right) 1 x Wiring Harness / Switch. What you might need for installation. Installation Instruction Not Included. Installation Hardware Not Included – Reuse Factory Hardware. Monday to Friday only (excluding Holidays). We are not responsible for carrier transit time. This information is provided by the carrier and excludes weekends and holidays. Designated trademarks and brands are the property of their respective owners. 195780 / SKU: 63068C17837 / TITLE: 15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style. The item “15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style” is in sale since Tuesday, December 19, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “advanation” and is located in Rowland Heights, California. This item can be shipped worldwide.
    • Brand: ADV
    • Other Part Number: Complete Replacement Conversion upgrade 33901-TY0-305 33901TY0305
    • Warranty: 90 DAY
    • Interchange Part Number: 04711-T5R-A00ZZ, 04711T5RA00ZZ, 71102-T5R-A00, 71102T5RA00 GK5
    • Color: Black
    • Manufacturer Part Number: 15 16 17 2016 2015 2017 GK5 3rd Gen Jazz Fog Lights Lamps Foglamp
    • MPN: 195780
    • Material: Polypropylene
    • Surface Finish: Unpainted
    • Installation Instruction: Not included

    15-17 For Honda Fit Complete Front Bumper Kit Lower Grille Foglamp Factory Style

    Tags: , , , , , , , , ,

  • range Comments Off
    Range_Rover_Evoque_Svr_Style_Bodykit_Upgrade_Kit_2011_1995_Painted_Fitted_01_mqk Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted

    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted
    RANGE ROVER EVOQUE SVR STYLE BODY KIT 4X4 SUV UPGRADE SPORT 201102015. Range Rover Evoque SVR Style Body Kit. Everything in the styling pack has been manufactured to transform your standard Range Rover Evoque into an enhanced SVR style performance model. See product description below for more details. RANGE ROVER EVOQUE L538 SVR STYLE BODY KIT. SVR Style Body Kit. Front Bumper SVR Style is equipped with the front grille, licence plate support and support for PDC sensors. Rear Bumper SVR Style is equipped with double air outlet diffuser and exhaust tips. Front and rear bumper are equipped with PDC holders. Grey Silver Supercharged Edition Single Frame. Styling Pack consists of. The bumpers are made out of OEM quality Polypropylene (PP) plastic, equipped with PDC holes, with lower central & side air intakes. Exhaust tips made of high-quality 304-grade stainless steel. All style parts have been primed and ready for the painting process. This kit is not suitable for. Range Rover Evoque (2011-onwards) equipped Range Rover Camera System. Land Rover Range Rover Evoque L538 2015+. The product is without E-mark/ABE/TUV. THIS BODY KIT IS CRAFTED OUT OF HIGH-QUALITY PP PLASTIC. Have a peace of mind and let us deal with the conversion from start to finish, we use a state of the art body shop to carry out all the work. Please message our team. For a package price and trade discount, please message our team. If you require any of the parts individually supplied or fitted, please message our team. BARUGZAI 22 ALLOY WHEELS ARE ALSO AVAILABLE IN A RANGE OF 6 DIFFERENT COLOURS, PLEASE SEE OUR OTHER LISTINGS ON OUR STORE OR MESSAGE OUR SUPPORT TEAM FOR FURTHER INFORMATION. We use Professional Installers, Painters and Panel technicians by an experienced custom body shop. The work is carried out to a very high standard and manufacture approved paints are used in high tech Spray Booths. If you have any questions about the fitting of this Styling Pack, please message our team. For Information on International Sales. Cleared funds being received. Please note this does not include weekends and public holidays. Enkahnz Exquisite Car Parts are not liable for any damages or missing parcels that occur during transit. All packages must be checked upon arrival for damages. If these instructions are not followed, then any claim for damages will be void. “Aftermarket parts” are divided into two categories: replacement parts and accessories. Replacement parts are automotive parts built or re-manufactured to replace OE parts. Accessories are parts made for comfort, convenience, performance or customization, and are designed for add-on after the original sale of the motor vehicle. Most body kits are made of fiberglass, chips and cracks may need to be repaired prior to installation – this is normal with all fiberglass parts. It is the customer’s responsibility to know all of the work involved in the installation process. Fibreglass kits are not direct bolt-ons and may require minor adjustments, curing and prepping prior to painting. We recommend that the customer seek an experienced custom shop to do the installation and refinishing of fiberglass products, which is experienced in this area and knows all variables to do with installation of carbon fibre, grp, fibreglass products. On some parts additional fastening clips, screws, bonding agents maybe required. We do not hold any responsibility for the damage in transit. Thanks for your understanding. Subscribe to our newsletter. The item “RANGE ROVER EVOQUE SVR STYLE BODYKIT UPGRADE KIT 2011+ £1995 PAINTED & FITTED” is in sale since Friday, October 12, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Full Body Kits”. The seller is “enkahnzexquisitecarparts” and is located in Bradford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand.
    • Colour: Primed
    • Material: Polypropylene (PP)
    • Manufacturer Part Number: n/a
    • Placement on Vehicle: Front
    • Brand: n/a

    Range Rover Evoque Svr Style Bodykit Upgrade Kit 2011+ £1995 Painted & Fitted

    Incoming search terms:

    • svr body kit language:en

    Tags: , , , , , , ,

  • fits Comments Off
    Fits_2015_2017_Mustang_GT_350_Style_Rear_Bumper_Diffuser_With_Dual_Exhaust_Pipes_01_wpyk Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes

    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes
    Aqcuire the stylish GT350 look. Aggressive looking upgrade for your Mustang. Note: Will not fit Real GT350 Models. Made for GT and GT Premium models. Product Descriptions: Lower Rear Valance, also Known as a Diffuser, is the exact same one that is featured on the Shelby GT350, California Special and Boss Mustangs. Offering aggressive race inspired styling this rear diffuser makes the perfect replacement part or appearance upgrade for your Mustang. GT350 Style Rear Bumper Diffuser -Quad muffler tip. Impact resistant and flexible. Take your base Model Mustang and convert it to the Aggressive GT350 Style. Notes: Some modification is required for installation. Material: Rear Diffuser – Polypropylene Muffler Tips – Stainless Steel. What’s in the box: 1 x GT350 Style Rear Bumper Diffuser 1 x Set of Stainless Steel Muffler Tips Necessary hardware is included. What you might need to install: Basic Hand Tools. Installation Instructions not provided. Some muffler tip cutting is required for installation. Some valance modification is required for installation. We are here to assist you! Contact a sales tech by clicking on Ask A Question! If your question or request is urgent, or regarding an order in process, please give us a call! Your satisfaction is important to us! Contact a sales advisor by clicking on the Ask A Question button for help processing a return. MY ORDER WAS DAMAGED IN TRANSIT. It is our responsibility to take care of it but they must be reported to us immediatly. YOU SENT ME THE WRONG ITEM! The item “Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes” is in sale since Tuesday, November 14, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “motorbyte” and is located in Rowland Heights, California. This item can be shipped worldwide.
    • Brand: MTB
    • Other Part Number: Upgrade Conversion Replacement Air Dam Garnish Molding Lip Trim
    • Interchange Part Number: FR3Z 17F828 AA Rear Bumper Vortex Generator Aerodynamic Aero Kit
    • Item Condition: New
    • Warranty: 90 DAY
    • Color: Black
    • Note: Will not Fit Real 350 Models
    • Manufacturer Part Number: 2017 2016 2015 15 16 17 Valance Valence Lower Under Body Diffuser
    • Material: Polypropylene
    • Surface Finish: Unpainted
    • MPN: 191776

    Fits 2015-2017 Mustang GT-350 Style Rear Bumper Diffuser With Dual Exhaust Pipes

    Tags: , , , , , , , , , ,