Innovation at Its Finest. The F90000285 Unleaded & E85 compatible in-tank fuel pump is the latest generation of Dual Channel Single Stage (DCSS) high flow pumps from Walbro / TI Automotive that features 8% more flow rate than its predecessor (F90000274). With a design that features the very latest in fluid pumping technology, the results are quite remarkable. At only 13cm long, this lightweight, small and quiet running pump is capable of supplying enough fuel for a staggering 900hp+ at 60PSI on naturally aspirated applications. Unlike conventional pumps that use a traditional Gerotor (generated rotor) design, the F90000285 utilises two parallel rows of turbine blades with a single impeller that helps to force fuel through at a rate like no other of a similar size. Another bonus is the fact that being flexi-fuel compatible with both petrol and E85 means even more power is available if you decide to go down that route. A check valve is also included to avoid a system leak-down and ensures fuel is only flowed one way. With this winning design combination, overall results are improved hot fuel flow, minimal noise and an increase in efficiency by up to 20% over conventional Gerotor pumps. They’re also made in the USA to the highest of specifications and are used as original equipment in some of the worlds fastest Supercars, making them a perfect upgrade for any serious power enthusiast. Outperforms all current market in-tank fuel pumps. Removes the need for two externally mounted fuel pumps on high power applications. Capable of supporting 900+HP at 60PSI naturally aspirated applications. Award winning Dual Channel Single Stage OE technology – All components validated to OEM specifications. Highest flowing brushed in-tank pump available from TI Automotive. Internal check valve (one way valve) prevents system pressure bleed down. High pressure relief valve helps to support supercharger and turbo applications. Excellent pump for applications requiring super high flow rates. Excellent hot fuel performance. 1x High quality Delphi’packard’ type harness to connect directly into the pumps built in Delphi harness. Walbro fuel filter P/N 125-190 (W80mm x L107mm) TI Automotive filter group type: B. 15cm long fuel hose 7mm I. D and 14mm O. 2x screw-type hose clamps. Fuel: Petrol & E85. Horsepower: 900+ at 60PSI, naturally aspirated applications. Main Housing Diameter: 39mm. Base Housing Diameter: 50mm. Fuel Inlet Diameter: 11mm OD. Fuel Outlet Diameter: 11mm OD. Test Voltage: 13.5 Volts. We (Driven 2 Automotive) only supply 100% genuine Walbro fuel pumps. In fact, we play a major active role in fighting back fakes/counterfeits by producing a series of website blog articles dedicated on showing you how to spot the dodgy ones. Trust genuine, trust us! Simply type’How to spot fake Walbro fuel pump’ into a search engine and we’ll sure to be near the top of the results. Installation should be performed by professional trained mechanic only. Slight modifications may be necessary to your pump carrier / sender unit, wiring and fuel lines. A complete flush of your fuel tank and fuel lines must be performed before using. Walbro Automotive Fuel Pumps Are Now TI Automotive. New Name, Same Obsession. For decades, Walbro automotive fuel pumps have been manufactured by TI Automotive. These pumps are now branded with the TI Automotive name, carrying a legacy for more than 60 years of manufacturing the most popular drop-in fuel pumps, with the same performance, quality and reliability that you have come to know and expect. Please be aware that Driven 2 Automotive will not be help responsible under any circumstances for any costs incurred from parts that are found to be faulty or that have failed due to poor installation. The most common cause of failure on any fuel pump is contamination due to rust/debris and other tiny objects. You must make sure your tank is completely flushed before fitting and that it’s been double checked. Although the pump is using filtered fuel, even the smallest of objects can cause failure and it shouldn’t be relied upon, especially with high powered applications. The item “WALBRO 525LPH FUEL PUMP + UNIVERSAL FITTING KIT HIGH FLOW HIGH PRESSURE 800HP” is in sale since Sunday, November 14, 2021. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Fuel Systems & Injection\Performance Fuel Pumps”. The seller is “driven2automotive” and is located in Taunton. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- Unit Quantity: 1
- Placement on Car: In-tank fuel sender unit
- Part Manufacturer: Walbro / TI Automotive
- Manufacturer Part Number: F90000285
- Unit Type: Unit
- Reference OE/OEM Number: WALBRO HIGH PERFORMANCE UPGRADE
- Brand: Walbro / TI Automotive
