• Category:

    • Volkswagen_Crafter_2017_ON_Radio_Stereo_Upgrade_Fitting_Kit_Fits_VW_Crafter_01_tqmd Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter

      Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter
      Mens / Womens Shavers. InCarTec FK-399 Fitting kit For Volkswagen. Complete stereo upgrade fitting kit to allow the fitting of an aftermarket Single DIN car stereo upgrade. Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units. The fitting kit includes a car radio fascia adapter panel to allow the fitting of an aftermarket car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with side fixing brackets so a radio can be installed without the need for a fitting cage. The fascia can also be used with a 103mm fitting cage. A radio replacement adapter cable is included too. The adapter cable allows the fitting of an aftermarket stereo upgrade by adapting the original 52 pin quadlock connector in the vehicle to standard aftermarket ISO connectors. The built in CANbus interface makes installation plug and play and also provides an ignition power supply to the new radio, this saves needing to find an ignition power supply from the fusebox. The CANbus interface will also give an additional output of your choice, either illumination, handbrake, speed pulse or reverse gear. The cable has an extension to allow the original radio to be reconnected in order to change the some of the vehicle settings such as time and date and VSC on/off. Fitting instructions are supplied with the adapter cable. An antenna adapter cable is in the fitting kit, this cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. VW Crafter ISO lead with CAN IGN/ Service Harness. Phantom 12V Fakra to DIN aerial adapter. Compatible with following vehicles. Car Make / Model. 2nd Gen (Type: SY/SZ). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. The wiring harness will allow to install the stereo. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units (As Pictured Below). See the image below that shows the available space behind the original radio. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.
      • Brand: InCarTec
      • Manufacturer Warranty: 2 Years
      • Manufacturer Part Number: FK-399
      • Material: Plastic
      • Country/Region of Manufacture: China
      • EAN: 7427282708814

      Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter

      Posted by admin @ 11:32 pm

      Tags: , , , , , ,

    Comments are closed.