• Category:

    • long Comments Off
      LONG_SHAFT_Ready_Built_Gibson_Epiphone_Les_Paul_Wiring_Upgrade_Loom_Harness_Kit_01_wcr LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit

      LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit
      Bloodstone Guitar Works specialise in custom building a guitar to your specification, one that you can have the ultimate confidence in its feel, tone and playability and truly cherish. We also produce our own range of Handwound pickups and Handwired wiring looms and undertake upgrades, repairs and setups. LONG SHAFT Ready Built up Gibson Les Paul Wiring upgrade / Wiring Loom. Long Shaft Length (18mm thread) – See other listing for cheaper 10mm option. These wiring looms are Individually hand-wired from UK-sourced genuine parts using 22 gauge Gavitt vintage cloth covered wire. A drop in replacement and a great performance and reliability upgrade for all Les Pauls. Top quality matched components are used throughout and the “float wire” method is adopted where all wires are pulled tight and elevated so they make no contact with the control /baseplate. It takes a little longer to build but is definitely worth the effort to maximise performance. Matched CTS USA Custom Audio EVERSE Taper 500K or 250K (You choose) Split Shaft Volume & Tone Potentiometers – smooth linear volume and tone change (no bunching or on/off effect). 0.022uF Sprague “Orange Drop” Tone Capacitors – removes the thinness and harshness inherent with budget capacitors. Separate “treble bleed” mod for both pickups – no muddiness of tone when reducing the volume knob. Premium quality SwitchCraft / High quality import and No Switch option. Bridge earth wire supplied with heatshrink tube to twist join with exiting earth, solder and insulate. Easy to follow colour coded wiring diagram. Fully soldered together and includes all nuts screws and washers ready to fit to your guitar. Atched in-house to within 10 Ohms (CTS pots tolerance is +/- 20% so a 250K pot can vary from 200-300 Ohms). Now using the 715p version which is sonically superior to the commonly used 225p. This item is in the category “Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “bloodstoneguitarworks” and is located in this country: GB. This item can be shipped to United Kingdom.
      • Jack socket type: Switchcraft 3/8\
      • Switch type: SwitchCraft Switch Fitted
      • To Fit: Electric Guitar
      • Country/Region of Manufacture: United Kingdom
      • Brand: Gibson
      • Type: Loom

      LONG SHAFT Ready Built Gibson /Epiphone Les Paul Wiring Upgrade Loom Harness Kit

      Tags: , , , , , , , , , ,

    • upgrade Comments Off
      Upgrade_wiring_kit_Fits_Gibson_Les_Paul_3_Pick_Up_Long_Shaft_Pots_with_switch_01_pxlo Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch

      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Welcome to Tone Man Guitar. Give your guitar that Classic Les Paul Tone. Warmth, body and fuller tone. K40Y-9 Vintage Russian PIO Caps. It will make a difference! Please read the details below. The standard wiring for 3 humbucker guitar is Bridge / Bridge & Middle / Neck. This kit has 1 Master Tone and 3 Volume controls. What’s In The Kit. Bourns 500K Potentiometers Long-Split-Shaft Coarse Spline, Audio Taper. 1 Master Tone 3 Volume. Switchcraft 3-Way Short Toggle switch Pre-assembled Gavitt Braided Shield Wiring with black tip. Shrink Tubing for each braided wire in cavity. 033uf PIO Vintage Aged Tone Cap (Qty 1 cap). Switchcraft ¼ inch Output Jack. Assembly Template Hard Board. All assembled except for final hook up of ¼ inch output jack & Pickups connection. 50s Wiring diagram and easy to read step by step installation instructions. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you are not sure whether your guitar uses short (3/8″) or long (3/4″) shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul’s, Epiphone’s, SG’s use short shafts. This kit uses Long Shaft. And as a general rule will fit most USA made Gibson Les Paul’s manufactured after 1977. Note: If you have an imported guitar e. You may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50’s and 60’s guitars is what I try to achieve. I guarantee the best parts and workmanship. I believe in good communication. We Want You To Be 100% Satisfied! I also offer other parts. O caps, pots and various pre-assembled vintage wiring harnesses for Les Paul’s, Stratocasters and others. The item “Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch” is in sale since Thursday, April 4, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • To Fit: Electric Guitar
      • Country/Region of Manufacture: United States
      • MPN: Does Not Apply
      • Custom Bundle: No
      • Brand: Tone Man Guitar
      • Modified Item: No
      • Non-Domestic Product: No
      • Type: Prewired Upgrade Les Paul Kit

      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch

      Tags: , , , , , , , , ,

    • upgrade Comments Off
      Upgrade_Wiring_Kit_vintage_1950s_Bumblebee_Caps_CTS_fit_Gibson_Les_Paul_Historic_01_gbkr Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
      Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
      Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
      Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic

      Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic
      Vintage Relic pre-wired upgrade kit fits Gibson Les Paul. Real vintage1950s Sprague Bumblebee. 022 uF 400v tone capacitors. This is the best and most economical way to improve the tone of your Les Paul! Direct replacement for your Historic Custom Shop Reissue R9 R8 R7 R6 R4 R0 1959 1958 1957 1956 1954 1960 reissue. Hear what you’ve been missing from your humbuckers or P-90s! 4 USA CTS 500k 10% Tolerance short shaft (brass) audio taper pots (2 volume, 2 tone). Top of the line CTS pots with tight tolerances and measuring 550k. We do measure all pots and use higher values for the volume positions. You may request specific pot values and we will do our best to match those values; please provide this info at check ou t. If you prefer LONG shaft pots, note that at checkout. 2 vintage 1950s Sprague Bumblebee. 022uF paper-in-oil vintage tone capacitors. 50’s style wiring. Vintage correct 20 AWG silver plated copper grounding wire between the pots. W i ring diag ram included. Ask if you need it wired for LEFT HANDED layout (note: we do not have reverse taper pots). Please note : this kit is designed for Gibson Les Paul Historic Reissue or vintage guitars that use. If your guitar requires. Shaft pots (most all non-Historic Reissue Gibsons), please request “long shaft” at checkout. Also, CTS pots require a 3/8 hole (in the top of your guitar); most USA made guitars are drilled this way, however imported guitars often are not. Can Size = 15/16 in. Radius X 3/8 in. Bushing Threads = 3/8-32. Bushing Height = 3/8 in. Shaft Type – split. 238 in (6.3mm). Spline Count = 24 (NOT metric). Shaft Length – 3/8 in. Hole size requirement = 3/8 in. Value = 550K Ohms. The item “Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic” is in sale since Wednesday, September 5, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Knobs, Jacks, Switches”. The seller is “vintage-relic” and is located in Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam, Uruguay.
      • To Fit Guitar: Electric Guitar
      • Modified Item: No
      • Country/Region of Manufacture: United States
      • Custom Bundle: No
      • Country of Manufacture: United States
      • Type: Switches
      • MPN: Does Not Apply
      • Brand: Gibson
      • Non-Domestic Product: No

      Upgrade Wiring Kit vintage 1950s Bumblebee Caps CTS fit Gibson Les Paul Historic

      Tags: , , , , , , , ,