• Category:

    • upgrade Comments Off
      Upgrade_wiring_kit_Fits_Gibson_Les_Paul_3_Pick_Up_Long_Shaft_Pots_with_switch_01_pxlo Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch

      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch
      Welcome to Tone Man Guitar. Give your guitar that Classic Les Paul Tone. Warmth, body and fuller tone. K40Y-9 Vintage Russian PIO Caps. It will make a difference! Please read the details below. The standard wiring for 3 humbucker guitar is Bridge / Bridge & Middle / Neck. This kit has 1 Master Tone and 3 Volume controls. What’s In The Kit. Bourns 500K Potentiometers Long-Split-Shaft Coarse Spline, Audio Taper. 1 Master Tone 3 Volume. Switchcraft 3-Way Short Toggle switch Pre-assembled Gavitt Braided Shield Wiring with black tip. Shrink Tubing for each braided wire in cavity. 033uf PIO Vintage Aged Tone Cap (Qty 1 cap). Switchcraft ¼ inch Output Jack. Assembly Template Hard Board. All assembled except for final hook up of ¼ inch output jack & Pickups connection. 50s Wiring diagram and easy to read step by step installation instructions. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you are not sure whether your guitar uses short (3/8″) or long (3/4″) shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul’s, Epiphone’s, SG’s use short shafts. This kit uses Long Shaft. And as a general rule will fit most USA made Gibson Les Paul’s manufactured after 1977. Note: If you have an imported guitar e. You may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50’s and 60’s guitars is what I try to achieve. I guarantee the best parts and workmanship. I believe in good communication. We Want You To Be 100% Satisfied! I also offer other parts. O caps, pots and various pre-assembled vintage wiring harnesses for Les Paul’s, Stratocasters and others. The item “Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch” is in sale since Thursday, April 4, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • To Fit: Electric Guitar
      • Country/Region of Manufacture: United States
      • MPN: Does Not Apply
      • Custom Bundle: No
      • Brand: Tone Man Guitar
      • Modified Item: No
      • Non-Domestic Product: No
      • Type: Prewired Upgrade Les Paul Kit

      Upgrade wiring kit Fits Gibson Les Paul 3 Pick Up Long Shaft Pots with switch

      Tags: , , , , , , , , ,

    • upgrade Comments Off
      Upgrade_prewired_wiring_kit_Fits_Gibson_Epiphone_SG_3_Pick_Up_Short_Shaft_Pots_01_gxiu Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots

      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots
      Welcome to Tone Man Guitar. Give your guitar that Classic SG Tone. Warmth, body and fuller tone. K40Y-9 Vintage Russian PIO Caps. It will make a difference! Please read the details below. The standard wiring for 3 humbucker guitar is Bridge / Bridge & Middle / Neck. This kit has 1 Master Tone and 3 Volume controls. What’s In The Kit. Bourns 500K Potentiometers Short-Split-Shaft Coarse Spline, Audio Taper. 1 Master Tone 3 Volume. Switchcraft 3-Way R Angle L Shape Toggle switch with black tip. 033uf PIO Vintage Aged Tone Cap (Qty 1 cap). Switchcraft ¼ inch Output Jack. All prewired with Gavitt cloth push back wire thru out. Assembly Template Hard Board. All assembled except for final hook up of Pickups and ground connection. 50s Wiring diagram and easy to read step by step installation instructions. I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit. If you are not sure whether your guitar uses short (3/8″) or long (3/4″) shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul’s, All Epiphone’s, All SG’s use short shafts. This kit uses Short Shaft. Note: If you have an imported guitar e. You may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns. Although these harnesses are pre-assembled and tested they do require some soldering to connect the pickups and the output jack. A 25 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation. I can not be responsible if you damage a unit. In stock means I have the parts to build. Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50’s and 60’s guitars is what I try to achieve. I guarantee the best parts and workmanship. I believe in good communication. We Want You To Be 100% Satisfied! I also offer other parts. O caps, pots and various pre-assembled vintage wiring harnesses for Les Paul’s, Stratocasters and others. The item “Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots” is in sale since Saturday, April 6, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Knobs, Jacks & Switches”. The seller is “tonemanguitar1″ and is located in Noblesville, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
      • Country/Region of Manufacture: United States
      • MPN: Does Not Apply
      • Custom Bundle: No
      • Brand: Tone Man Guitar
      • Non-Domestic Product: No
      • Modified Item: No
      • Type: Prewired Upgrade SG Kit

      Upgrade prewired wiring kit Fits Gibson Epiphone SG 3 Pick Up Short Shaft Pots

      Tags: , , , , , , , , ,