-
Powered by Just Template IT. AFAM Chain & Sprocket Kits. Ognibene Chain & Sprocket Kits. DID Chain & Sprocket Kits. Chain Tools & Chain Cleaning. Surflex Clutch Plate Kits. Brake Disc Bolt Kits. AFAM Alloy Rear Sprockets. BTR Brake Hose Kits. HEL Brake Hose Kits. Afam -1 / +1 Sprocket Pairs. DID VR46 Valentino Rossi. Calipers and Master Cylinders. AFAM Upgrade X-Ring Chain Sprocket Kit fits Voxan 1000 Charade Racing 05-07. AFAM Upgrade Chain and Sprocket Kit. AFAM upgrade gold X-ring chain. AFAM steel front sprocket. AFAM steel rear sprocket. 100ml Motul chain lube – For UK customers only. Chain and Sprockets will all be supplied in the standard sizes for the bike in the title of this listing unless stated otherwise. AFAM chains are widely regarded as being amongst the very best chains in the world and is used in all levels of racing. The upgrade X-ring chain supplied in this kit is finished with gold side plates and includes the joining link. AFAM Steel Front Sprockets. AFAM front sprockets are manufactured from high spec case hardened alloy steel to the same exacting standards as AFAM steel rear sprockets, incorporating the same unique AFAM tooth profile. This makes them the perfect match for AFAM’s rear sprockets and completes the package when it comes to getting the best lifespan out of a chain and sprocket kit. AFAM Steel Rear Sprockets. Manufactured from high quality, induction hardened C45 steel with a unique tooth profile, AFAM steel sprockets are higher quality than original equipment (OE) sprockets. These sprockets will get the best out of any chain, but when combined with a high quality AFAM chain you can expect excellent longevity and high mileage. Rear sprocket will be supplied in either silver or black. Sprockets may differ from the design shown in the listing image but will be correct for the bike in the title of this listing. Please note that we are unable to send the Motul Chain Lube to customers outside of the UK. If you need any advice or are unsure about fitment please get in touch and a member of our team will be happy to help. AFAM have been making world class chains and sprockets for over 40 years. Their products are used at all levels of competition from amateur club racing right up to WSBK and MotoGP. These charges are out of our control and NOT our responsibility. Some of our products such as wheels and suspension are special order items which are made for you. This can carry a lead time of 4+ weeks. We reserve the right to use alternative post/courier services than advertised if necessary. We can also accept card payments via telephone. We are able to offer finance on O. Finance is subject to status. Based in Frome, Somerset, we are the UK Sole importers of high-performance parts including Brembo brake pads, AFAM chains and sprocket kits and OZ Wheels – proven winners and widely used in the world Super Bike, British Superbike and MotoGP to name a few. Here at Bike Torque Racing, we believe in offering the best quality parts regardless of your ride or requirements. Combine this with our passion for offering superb customer service and expertise, we can guarantee that Bike Torque Racing is your one stop for all motorcycle part needs.
Tags: 05-07, afam, chain, charade, fits, racing, sprocket, upgrade, voxan, x-ring
-
Stoney Racing MG TF 1.8 PRT Silicone Coolant Hose Kit. Note: Some types of coolant are not compatible with silicone hoses. This high quality reinforced silicone hose kit replaces 23 coolant hoses including the front radiator hoses, heater hoses and other minor coolant hoses at the front of the car and in the engine bay. The hoses are a direct fit for the Pressure Relief Thermostat (PRT) model which was fitted to late’03 onwards vehicles as standard. The hoses can also be used to retrofit a PRT to an earlier manual MG F or TF (from VIN YD522572 onwards) models. The majority of the hose will also fit earlier MG F models up to VIN YD522572 but one throttle body hose needs modifying by cutting the hose and rejoining it with a plastic or aluminium connector (not supplied) so that the end of the hose can be rotated 180 degrees, to fit the earlier model. Upgrading and relocating the original thermostat to a PRT is a common upgrade for earlier vehicles to help prevent head gasket failure. The PRT thermostat is not included but is commonly available, along with a few other parts listed below that you will need to fit a PRT to the vehicle. These parts are not supplied with this kit. Pressure Relief Thermostat Part no. Thermostat Blanking Plate Part no. Thermostat Seal Part no. Hose Connector Y-Piece Part no. Hose Connector T-Piece Part no. The above parts along with our hose kit covers everything you need to upgrade to a PRT. Note that there are two versions of hose #14 on the diagram in the gallery for this kit, a single piece for cars that came without a PRT and a 3-piece assembly for cars that came with a PRT. You will only need one of these hose assemblies for any particular vehicle. The hoses will also fit VVC models but the kit does not include the two additional VVC hoses for the oil cooler which are available as a separate kit. Available in our store in. Please note that all screens display colours differently and while we make every effort to ensure our photos are as accurate as possible on the majority of monitors and devices the product colour may vary slightly from the colour you see on screen. The kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations. Spring clamps are the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit/remove, and being mild steel they are more prone to surface rust over time. Whilst this won’t affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should. Worm-Drive clamps have slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay. T-Bolt clamps Not available for this product. For some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small. Fitment: Direct replacement for the standard hoses. Construction: 4.5mm 4-ply silicone with 3-ply polyester reinforcing. Max Operating Pressure: >7bar. Operating Temperature range: -50°c to 180°c. Occasionally a hose may need to be trimmed slightly which can be done with a sharp utility/stanley knife with a NEW blade using a hose clamp as a guide to get a straight cut. More Stoney Racing Products. Looking for a silicone hose kit for your vehicle? How about exchanging your old rubber hoses for a FREE Silicone Hose Kit? If we don’t already produce a kit for your car and you can supply us with the standard hoses we may be able to have a silicone hose kit made up for you FREE of charge! This is subject to your car being one we are interested in making a kit for, we may not be able to make a kit for your vehicle if it is rare or not popular for modifying or use in motorsport. The turnaround for this is around 5-7 weeks from when we receive your stock hoses, so unless you can source a spare set to send us your car would need to be off the road for this period. We are a British-based business located in Shropshire, all our stock is dispatched from our UK premises. We do not dispatch orders on weekends or UK bank holidays. Unfortunately our workshop is on a site that is strictly no retail customers allowed so we are not able to offer collection on our items. Important for EU buyers: Following new EU VAT rules goods imported from the UK to EU countries now require VAT to be paid to your country, but UK VAT is no longer payable. These terms do not affect your statutory rights. This item is in the category “Home, Furniture & DIY\Plumbing & Fixtures\Other Home Plumbing & Fixtures”. The seller is “stoney-racing” and is located in this country: GB. This item can be shipped worldwide.
- Colour: Red
- Clamp Kit: SS Worm-Drive
- Sub-Type: Silicone
- Modified Item: No
- MPN: MGTF-0002
- Item: Hose Kit
- Custom Bundle: No
- Unit Type: Unit
- Unit Quantity: 26
- Brand: Stoney Racing
- Non-Domestic Product: No
- Featured Refinements: Silicone Hose
- Type: Hose Kit
Tags: breather, coolant, fits, hoses, racing, radiator, silicone, stoney, upgrade
-
Tags: boss, racing, spoke, sports, steering, transporter, wheel
-
O ur V ision. Proper strong sturdy professional racing / road suede Aftermarket steering wheel. SIZE (330mm / 13 INCH). Perfect size for better control. Offers excellent grip and control Will add that “race” look to your cars interior. Bolt Pattern 6 x 70mm PCD FREE horn button – and ring retainer Anodized Spokes (not spray painted like some other steering wheels). BEWARE OF CHEAPER VERSIONS WHICH HAVE BEEN REPORTED TO COME LOOSE OR START TO WOBBLE AFTER TIME, THIS IS AN MOT FAILURE. This steering wheel will fit any car, but as with all aftermarket steering wheels, you just need a aftermarket “boss kit” to fit it to your car if you dont already have one. We stock a vast array of boss kits for most vehicles in our shop. If you need a boss kit. Then search for the relevant boss kit in the search bar, for example “Mazda MX5 boss kit”. If we dont have one for your car then dont worry, our steering wheels are universal which mean they will fit all boss kits on the market. PLEASE ALSO VIEW OUR SNAP OFF QUICK RELEASE STEERING WHEEL BOSS KITS THAT ALLOWS YOU TO INSTANTLY REMOVE YOUR VEHICLES CAR STEERING WHEEL, AT THE LINK BELOW. BOSS KITS / SNAP OFF QUICK RELEASE BOSS KITS. TURBO BLANKETS / EXHAUST HEAT WRAP. SILICONE INLET / RADIATOR PIPES. COOLING FANS ECT ECT. Fully VAT registered UK company. No surprising import duty pay. All stock sent from our UK warehouse the very next day. Pride ourselves on return customers from all over the world, including many trade customers and race teams. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Interior Styling\Steering Wheels & Boss Kits”. The seller is “lince_race_and_rally” and is located in this country: GB. This item can be shipped worldwide.
- Modified Item: No
- Colour: Black
- Custom Bundle: No
- Interchange Part Number: ALL
- Material: METAL
- Warranty Period: 5 YEARS
- Type: Steering Wheel Boss Kit
- Manufacturer Part Number: UNIVERSAL AFTERMARKET UPGRADE
- Non-Domestic Product: No
- Reference OE/OEM Number: PERFORMANCE STEERING WHEEL 13 INCH, ALCANTARA SPORTS STEERING WHEEL, IDEAL FOR ROAD TRACK DAY DRIFTING RACING, 13.7\
- Other Part Number: LINCESWBO19
- Brand: LRR
Tags: 330mm, black, boss, drift, fits, race, racing, steering, suede, track, wheel
-
Tags: 330mm, boss, fits, golf, more, polo, racing, steering, suede, wheel
-
Tags: boss, deep, dish, fits, most, racing, silver, sport, steering, suede, wheel
-
Tags: boss, drifting, race, racing, sports, steering, suede, toyota, wheel
-
Tags: 280mm, boss, fits, inch, racing, smaller, sport, steering, wheel
-
Tags: 350mm, boss, fits, golf, more, race, racing, sport, steering, wheel
-
Tags: 280mm, boss, mazda, racing, small, sports, steering, wheel
Recent Comments