• Category:

    • in-tank Comments Off
      IN_TANK_455LPH_FUEL_PUMP_E85_COMPATIBLE_With_GENUINE_WALBRO_FITTING_KIT_F90000267_01_mpdt IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267

      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267
      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE W/ GENUINE WALBRO FITTING KIT F90000267. Innovation at Its Finest. The F90000267 in-tank fuel pump is an E85 flex-fuel compatible award winning Dual Channel Single Stage (DCSS) high flow fuel pump manufactured by Walbro/TI Automotive. The design features the very latest in fluid pumping technology and the results are quite remarkable. This lightweight, small and quiet running pump is capable of supplying enough fuel for up to a staggering 800hp. This version of the popular TI Automotive/ DCSS pump is E85compatible and produces a faster flow rate than the previously released F90000262 pump. All electrical connections must be sealed to be used with E85, therefore this updated version is fitted with a high quality Delphi’Packard’ type connector built into harness. Unlike conventional pumps that use a traditional Gerotor (generated rotor) design, the F90000267 utilizes two parallel rows of turbine blades with a single impeller that helps to force fuel through at a rate like no other of a similar size. With this winning design combination, overall results are improved hot fuel flow, minimal noise and an increase in efficiency by up to 20% over conventional Gerotor pumps. These pumps are manufactured in the USA to the highest of specifications and they’re also used as original equipment (OE) in some of the world’s most modern super cars; a more than good enough reason to invest for any serious power enthusiast wanting to upgrade. Removes the need for two large externally mounted fuel pumps on high power applications. Capable of supporting up to around 800bhp at 12V and 1000bhp at13.5V. PACE Award winning Dual Channel Single Stage OE technology. Specially designed for high performance engines. All components are validated to OEM specifications for approved use in E85/Flex fuel applications. High-quality fitting kit included. Internal check valve (one way valve) prevents system pressure bleed down. High pressure relief valve helps to support supercharger and turbo applications. Excellent pump for applications requiring super high flow rates. Excellent hot flow performance. Flow Rate (lph): 450. Flow Rate (gph): 119. Max System Pressure (psi): 87. Max System Pressure (kPa): 600. TI Automotive/Walbro Filter Group: B. Inlet Configuration: 0 degree outlet fitting to inlet orientation. We include a complete high quality fitting kit that features. 1x High quality fuel hose 5/16 8mm I. 2x Jubilee fuel hose clamps. 1x Packard Type power harness with positive and negative spade connectors. 1x Filter/strainer with star retainer clip. Dual-Channel Single Stage (DCSS). TI Automotive’s PACE Award-winning fuel pump design is a perfect example of commitment to innovation. It features a thermoplastic impeller, aluminium anodized pumping chambers and integrated motor. A dual high-pressure design maintains velocity in the channel by splitting the flow between inner and outer paths. The pumping sections work in parallel as opposed to in series, as is common in most two-stage series pumps. Orders will be processed instantly and dispatched in same day normally, so we do NOT accept. Note after you place orders. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We appreciate your business and strived to improve our customer service and our commitment to quality. And we will do our best help you resolved it. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “billionautocars” and is located in this country: GB. This item can be shipped to Ireland, Portugal, Spain, Germany, United Kingdom, Italy, Poland, Czech Republic, Greece, Hungary, Lithuania, Luxembourg, Slovakia.
      • Country/Region of Manufacture: United Kingdom
      • Type: Fuel Pump
      • Manufacturer Part Number: GST450 + Kit 700-205
      • Part Manufacturer Number: GST450 + Kit 700-205
      • Part Manufacturer: Walbro
      • Reference OE/OEM Number: HIGHER FLOW THAN 044 0580254044 and 255, F90000267,GST450K,TIA485-2,E85,255,400,NOT GSS342, WALBRO E85 455 LPH FUEL PUMP, WALBRO HIGH PERFORMANCE UPGRADE
      • Placement on Vehicle: In Tank Performance Upgrade
      • Brand: Gearmonster

      IN-TANK 455LPH FUEL PUMP E85 COMPATIBLE With GENUINE WALBRO FITTING KIT F90000267

      Tags: , , , , , , , ,

    • walbro Comments Off
      Fit_For_WALBRO_F90000267_450LPH_High_Performance_E85_Fuel_Pump_Flex_Hose_Kit_01_jxz Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit

      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit
      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit. (1) Walbro F90000267 450lph High Pressure Fuel Pump. See detailed photos for reference to what the newer kit includes. Walbro F90000267 450LPH pump is the highest flowing intank fuel pump on the market, and is E85 safe to boot. Walbro designed the pump to meet the requirements of modern turbocharged applications where a single 255LPH fuel pump is insufficient. The pump uses a turbine style design which incorporates two composite plastic blades. The turbine design lends itself to extremely quiet operation, especially compared to Walbro’s previous “gerator” pump design that had metal gears which were notorious for a very loud whining noise which could easily be heard over even the loudest aftermarket exhaust setups. The Walbro 450LPH pump can flow anywhere from 15-120psi (the bypass valve is set higher than Walbro’s previous fuel pumps, which were around 85psi). Final fuel pressure is determined by your fuel pressure regulator. Please note that this is an aftermarket fuel pump, and some modifications may be required to get it to fit. The overal size is very similar to Walbro’s previous generation GSS340/GSS341/GSS342, however the base is slightly enlarged as shown in the pictures. No other intank pump on the market can come close. This pump can support over 800hp using larger than stock fuel lines. This pump can still support significantly more power than a Walbro 255LPH pump even when using stock fuel lines. Orders will be processed instantly and dispatched in same day normally, so we do NOT accept. Note after you place orders. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We appreciate your business and strived to improve our customer service and our commitment to quality. And we will do our best help you resolved it. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “gearautosalons” and is located in this country: GB. This item can be shipped to United Kingdom, Ireland, Germany, France, Italy, Spain.
      • Type: Fuel Pump
      • Manufacturer Part Number: F90000267&400-1168
      • Reference OE/OEM Number: F90000267
      • Manufacturer Warranty: 5 Years
      • Placement on Vehicle: In Tank Performance Upgrade
      • Interchange Part Number: F90000267 TIA485-2,TIA-485-2
      • Brand: Gearmonster

      Fit For WALBRO F90000267 450LPH High Performance E85 Fuel Pump + Flex Hose + Kit

      Tags: , , , , , , , ,

    • walbro Comments Off
      Walbro_Motorsport_Upgrade_In_Tank_Fuel_Pump_Kit_fits_Lancia_ITP239_01_zhw Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (fits Lancia) (ITP239)

      Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (fits Lancia) (ITP239)
      Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (fits Lancia) (ITP239). Distributor & Coil Fittings. Ignition Cable and Connectors. Ignition Tools – See Tools. Spark Plugs Four Pk. Spark Plugs Six Pk. Spark Plugs Eight Pk. Spark Plugs Ten Pk. Spark Plugs Twelve Pk. Spark Plug Two Pk. Spark Plug Three Pk. Spark Plug Five Pk. Glow Plug Control Units. Connectors & Junction Boxes. Testers – See Tools. Wiring Tools – See Tools. Battery Chargers – See Tools. Battery Clamps & Covers. Battery Terminal & Covers. Battery Testers – See Tools. Battery Tools – See Tools. Made Up Cables Leads & Straps. Fuel Pumps & Spares. Walbro/Hi Fuel Pumps -In Line. Walbro/Hi Fuel Pumps -In Tank. Fuel Pipes, Hoses & Connectors. Fuel Pipe & Fittings Imperial. Fittings & Adaptors Metric NPT. Fuel Taps & Spares. Fuel Pipe & Fuel Hose. Hose Finishers & Clips. Ball & Rose Joints. In Line Fuel Filters. Sytec Fuel Filters In Tank. Sytec Fuel Filters Parts. Sytec Competition Fuel Filters. Sytec Fuel Filters Bulle t. Dellorto Jets – Chokes & Compo. Weber Jets – Chokes & Componen. Carburettor Service Kits & Mou. Sytec Throttle Linkage Kits. Fuel Injection Pres Regulators. Bosch Competition One Way Valv. Fuel Pressure Gauges & Adaptor. Competition One Way Valves. Motorsport One Way Valves. Turbo Dmp Valves & Boost Adju. Swirl Pots & Water Seperators. Rotary & Splash Proof Switches. Starter Switches & Solenoids. Plug Sockets & Box Spanners. The Green Spark Plug. Brake Pipe And Brake Fittings. Indicator Stop Tail Side Bulbs. Air Horns and Valves. Fuel > Fuel Pumps & Spares > Walbro/Hi Fuel Pumps -In Tank. Fuel>Fuel Pumps & Spares. Green Spark Plug Co. Ltd has now added a dedicated sales and distribution team to handle customers questions and pre-sales enquires, we are experts in our field so if you have a query let us know! Read More About Us. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “timgreen880″ and is located in this country: GB. This item can be shipped worldwide.
      • Pack Size: 1 Single Unit
      • Part_Number: ITP239
      • Brand: Walbro
      • Manufacturer: Walbro
      • Manufacturer Part Number: ITP239
      • MPN: ITP239
      • EAN: 5053557461010

      Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (fits Lancia) (ITP239)

      Tags: , , , , , , , ,

    • walbro Comments Off
      Walbro_Motorsport_Upgrade_In_Tank_Fuel_Pump_Kit_Fits_Toyota_ITP216_01_nr Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (Fits Toyota) (ITP216)

      Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (Fits Toyota) (ITP216)
      Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (Fits Toyota) (ITP216). Distributor & Coil Fittings. Ignition Cable and Connectors. Ignition Tools – See Tools. Spark Plugs Four Pk. Spark Plugs Six Pk. Spark Plugs Eight Pk. Spark Plugs Ten Pk. Spark Plugs Twelve Pk. Spark Plug Two Pk. Spark Plug Three Pk. Spark Plug Five Pk. Glow Plug Control Units. Connectors & Junction Boxes. Testers – See Tools. Wiring Tools – See Tools. Battery Chargers – See Tools. Battery Clamps & Covers. Battery Terminal & Covers. Battery Testers – See Tools. Battery Tools – See Tools. Made Up Cables Leads & Straps. Fuel Pumps & Spares. Walbro/Hi Fuel Pumps -In Line. Walbro/Hi Fuel Pumps -In Tank. Fuel Pipes, Hoses & Connectors. Fuel Pipe & Fittings Imperial. Fittings & Adaptors Metric NPT. Fuel Taps & Spares. Fuel Pipe & Fuel Hose. Hose Finishers & Clips. Ball & Rose Joints. In Line Fuel Filters. Sytec Fuel Filters In Tank. Sytec Fuel Filters Parts. Sytec Competition Fuel Filters. Sytec Fuel Filters Bulle t. Dellorto Jets – Chokes & Compo. Weber Jets – Chokes & Componen. Carburettor Service Kits & Mou. Sytec Throttle Linkage Kits. Fuel Injection Pres Regulators. Bosch Competition One Way Valv. Fuel Pressure Gauges & Adaptor. Competition One Way Valves. Motorsport One Way Valves. Turbo Dmp Valves & Boost Adju. Swirl Pots & Water Seperators. Rotary & Splash Proof Switches. Starter Switches & Solenoids. Plug Sockets & Box Spanners. The Green Spark Plug. Brake Pipe And Brake Fittings. Indicator Stop Tail Side Bulbs. Air Horns and Valves. Fuel > Fuel Pumps & Spares > Walbro/Hi Fuel Pumps -In Tank. Fuel>Fuel Pumps & Spares. Green Spark Plug Co. Ltd has now added a dedicated sales and distribution team to handle customers questions and pre-sales enquires, we are experts in our field so if you have a query let us know! Read More About Us. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “timgreen880″ and is located in this country: GB. This item can be shipped worldwide.
      • Pack Size: 1 Single Unit
      • Part_Number: ITP216
      • Brand: Walbro
      • Manufacturer: Walbro
      • Manufacturer Part Number: ITP216
      • MPN: ITP216
      • EAN: 5053557458546

      Walbro Motorsport Upgrade In-Tank Fuel Pump Kit (Fits Toyota) (ITP216)

      Tags: , , , , , , , ,

    • walbro Comments Off
      Walbro_525lph_Fuel_Pump_Universal_Fitting_Kit_High_Flow_High_Pressure_800hp_01_akg Walbro 525lph Fuel Pump + Universal Fitting Kit High Flow High Pressure 800hp

      Walbro 525lph Fuel Pump + Universal Fitting Kit High Flow High Pressure 800hp
      Innovation at Its Finest. The F90000285 Unleaded & E85 compatible in-tank fuel pump is the latest generation of Dual Channel Single Stage (DCSS) high flow pumps from Walbro / TI Automotive that features 8% more flow rate than its predecessor (F90000274). With a design that features the very latest in fluid pumping technology, the results are quite remarkable. At only 13cm long, this lightweight, small and quiet running pump is capable of supplying enough fuel for a staggering 900hp+ at 60PSI on naturally aspirated applications. Unlike conventional pumps that use a traditional Gerotor (generated rotor) design, the F90000285 utilises two parallel rows of turbine blades with a single impeller that helps to force fuel through at a rate like no other of a similar size. Another bonus is the fact that being flexi-fuel compatible with both petrol and E85 means even more power is available if you decide to go down that route. A check valve is also included to avoid a system leak-down and ensures fuel is only flowed one way. With this winning design combination, overall results are improved hot fuel flow, minimal noise and an increase in efficiency by up to 20% over conventional Gerotor pumps. They’re also made in the USA to the highest of specifications and are used as original equipment in some of the worlds fastest Supercars, making them a perfect upgrade for any serious power enthusiast. Outperforms all current market in-tank fuel pumps. Removes the need for two externally mounted fuel pumps on high power applications. Capable of supporting 900+HP at 60PSI naturally aspirated applications. Award winning Dual Channel Single Stage OE technology – All components validated to OEM specifications. Highest flowing brushed in-tank pump available from TI Automotive. Internal check valve (one way valve) prevents system pressure bleed down. High pressure relief valve helps to support supercharger and turbo applications. Excellent pump for applications requiring super high flow rates. Excellent hot fuel performance. 1x High quality Delphi’packard’ type harness to connect directly into the pumps built in Delphi harness. Walbro fuel filter P/N 125-190 (W80mm x L107mm) TI Automotive filter group type: B. 15cm long fuel hose 7mm I. D and 14mm O. 2x screw-type hose clamps. Fuel: Petrol & E85. Horsepower: 900+ at 60PSI, naturally aspirated applications. Main Housing Diameter: 39mm. Base Housing Diameter: 50mm. Fuel Inlet Diameter: 11mm OD. Fuel Outlet Diameter: 11mm OD. Test Voltage: 13.5 Volts. We (Driven 2 Automotive) only supply 100% genuine Walbro fuel pumps. In fact, we play a major active role in fighting back fakes/counterfeits by producing a series of website blog articles dedicated on showing you how to spot the dodgy ones. Trust genuine, trust us! Simply type’How to spot fake Walbro fuel pump’ into a search engine and we’ll sure to be near the top of the results. Installation should be performed by professional trained mechanic only. Slight modifications may be necessary to your pump carrier / sender unit, wiring and fuel lines. A complete flush of your fuel tank and fuel lines must be performed before using. Walbro Automotive Fuel Pumps Are Now TI Automotive. New Name, Same Obsession. For decades, Walbro automotive fuel pumps have been manufactured by TI Automotive. These pumps are now branded with the TI Automotive name, carrying a legacy for more than 60 years of manufacturing the most popular drop-in fuel pumps, with the same performance, quality and reliability that you have come to know and expect. Please be aware that Driven 2 Automotive will not be help responsible under any circumstances for any costs incurred from parts that are found to be faulty or that have failed due to poor installation. The most common cause of failure on any fuel pump is contamination due to rust/debris and other tiny objects. You must make sure your tank is completely flushed before fitting and that it’s been double checked. Although the pump is using filtered fuel, even the smallest of objects can cause failure and it shouldn’t be relied upon, especially with high powered applications. The item “WALBRO 525LPH FUEL PUMP + UNIVERSAL FITTING KIT HIGH FLOW HIGH PRESSURE 800HP” is in sale since Sunday, November 14, 2021. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Fuel Systems & Injection\Performance Fuel Pumps”. The seller is “driven2automotive” and is located in Taunton. This item can be shipped worldwide.
      • Country/Region of Manufacture: United States
      • Unit Quantity: 1
      • Placement on Car: In-tank fuel sender unit
      • Part Manufacturer: Walbro / TI Automotive
      • Manufacturer Part Number: F90000285
      • Unit Type: Unit
      • Reference OE/OEM Number: WALBRO HIGH PERFORMANCE UPGRADE
      • Brand: Walbro / TI Automotive

      Walbro 525lph Fuel Pump + Universal Fitting Kit High Flow High Pressure 800hp

      Tags: , , , , , , , , ,

    • walbro Comments Off
      WALBRO_485LPH_E85_In_Tank_Fuel_Pump_FITTING_KIT_FOR_MAZDA_RX8_F90000274_01_wvz WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA RX8 F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA RX8 F90000274
      Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications. 100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump. The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 750hp. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps. Outlet diameter: 10mm (3/8) Diameter (upper body) 39mm Diameter (lower body) 50mm NOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. Please check to see if product looks similar to pictures showed on. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA RX8 F90000274″ is in sale since Tuesday, August 8, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
      • Brand: WALBRO
      • Manufacturer Part Number: F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA RX8 F90000274

      Tags: , , , , , ,

    • walbro Comments Off
      WALBRO_485LPH_E85_In_Tank_Fuel_Pump_FITTING_KIT_FOR_SKYLINE_R32_GTR_F90000274_01_faty WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SKYLINE R32 GTR F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SKYLINE R32 GTR F90000274
      Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications. 100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump. The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 750hp. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps. Outlet diameter: 10mm (3/8) Diameter (upper body) 39mm Diameter (lower body) 50mm NOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. Please check to see if product looks similar to pictures showed on. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SKYLINE R32 GTR F90000274″ is in sale since Tuesday, August 8, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
      • Brand: WALBRO
      • Manufacturer Part Number: F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SKYLINE R32 GTR F90000274

      Tags: , , , , , ,

    • walbro Comments Off
      WALBRO_485LPH_E85_In_Tank_Fuel_Pump_FITTING_KIT_FOR_MAZDA_FD3_RX7_F90000274_01_rvq WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA FD3 RX7 F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA FD3 RX7 F90000274
      Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications. 100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump. The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 750hp. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps. Outlet diameter: 10mm (3/8) Diameter (upper body) 39mm Diameter (lower body) 50mm NOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. Please check to see if product looks similar to pictures showed on. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA FD3 RX7 F90000274″ is in sale since Tuesday, August 8, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
      • Brand: WALBRO
      • Manufacturer Part Number: F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR MAZDA FD3 RX7 F90000274

      Tags: , , , , , ,

    • walbro Comments Off
      WALBRO_485LPH_E85_In_Tank_Fuel_Pump_FITTING_KIT_FOR_SUBARU_GC8_EJ20_F90000274_01_jzpv WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SUBARU GC8 EJ20 F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SUBARU GC8 EJ20 F90000274
      Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications. 100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump. The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 750hp. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency thats 20 percent higher than conventional pumps. Outlet diameter: 10mm (3/8) Diameter (upper body) 39mm Diameter (lower body) 50mm NOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. Please check to see if product looks similar to pictures showed on. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SUBARU GC8 EJ20 F90000274″ is in sale since Tuesday, August 8, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
      • Brand: WALBRO
      • Manufacturer Part Number: F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR SUBARU GC8 EJ20 F90000274

      Tags: , , , , , , ,

    • walbro Comments Off
      WALBRO_485LPH_E85_In_Tank_Fuel_Pump_FITTING_KIT_FOR_HOLDEN_LS1_LS2_F90000274_01_jj WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR HOLDEN LS1 LS2 F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR HOLDEN LS1 LS2 F90000274
      Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications. 100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump. The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 750hp. Designed for E85 or gasoline applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps. Outlet diameter: 10mm (3/8) Diameter (upper body) 39mm Diameter (lower body) 50mm NOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. Please check to see if product looks similar to pictures showed on. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR HOLDEN LS1 LS2 F90000274″ is in sale since Tuesday, August 8, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
      • Brand: WALBRO
      • Manufacturer Part Number: F90000274

      WALBRO 485LPH E85 In-Tank Fuel Pump+FITTING KIT FOR HOLDEN LS1 LS2 F90000274

      Tags: , , , , , ,

    « Previous Entries