• Category:

    • rocker Comments Off
      Rocker_Arms_with_Upgraded_Trunion_Kit_Installed_fits_6_2L_LS3_01_gr Rocker Arms with Upgraded Trunion Kit Installed fits 6.2L LS3

      Rocker Arms with Upgraded Trunion Kit Installed fits 6.2L LS3
      Rocker Arms with Upgraded Trunion Kit Installed fits 6.2L LS3. UPGRADED 8620 STEEL TRUNNIONS. CAPTIVE ROLLER BEARING DESIGN. 100 % DROP IN REPLACEMENT. The item “Rocker Arms with Upgraded Trunion Kit Installed fits 6.2L LS3″ is in sale since Friday, October 8, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Valvetrain Components\Rocker Arms & Parts”. The seller is “horsepowerclub” and is located in Fort Lauderdale, Florida. This item can be shipped worldwide.
      • Manufacturer Part Number: 35071
      • Brand: PSM

      Rocker Arms with Upgraded Trunion Kit Installed fits 6.2L LS3

      Tags: , , , , ,

    • rocker Comments Off
      Rocker_Arms_with_upgraded_Trunion_Kit_Specific_to_Gen_V_LT1_LT4_LV3_L83_L86_01_vxh Rocker Arms with upgraded Trunion Kit Specific to Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with upgraded Trunion Kit Specific to Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with upgraded Trunion Kit Specific to Gen V LT1 LT4 LV3 L83 L86

      Rocker Arms with upgraded Trunion Kit Specific to Gen V LT1 LT4 LV3 L83 L86
      Rocker Arm Trunion Kit – Specific to Gen V LT1 LT4 LV3 L83 L86. Send in your reusable Gen V Rocker arms and. These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation. The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors. The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost). These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous. The Kit includes the rocker arm trunions, rocker arm bearings, and rocker arm retaining rings and upgraded bolts for a complete installation. The bolts we supply are slightly shorter than factory bolts so they do not protrude into the intake ports. Bolts are stronger than a grade 8 bolt with a minimum tensile strength of 170,000 psi. 16 rocker arm trunions. 32 rocker arm bearings. 32 rocker arm retaining rings. 2 washers for pressing bearings. Installation is fairly simple with the use of a press or a simple vise along with basic hand tools. Instructions are included to aid in the installation. The item “Rocker Arms with upgraded Trunion Kit Specific to Gen V LT1 LT4 LV3 L83 L86″ is in sale since Tuesday, September 11, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam, Antigua and barbuda, Aruba, Belize, Dominica, Saint kitts and nevis, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Iceland, Jordan, Cayman islands, Sri lanka, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Uruguay.
      • Interchange Part Number: trunnion, Retro-Fit,
      • Manufacturer Part Number: A3100+55200 Installed
      • Other Part Number: trunnion
      • Brand: Michgian Motorsports

      Rocker Arms with upgraded Trunion Kit Specific to Gen V LT1 LT4 LV3 L83 L86

      Tags: , , , ,

    • rocker Comments Off
      Rocker_Arms_with_Bushing_Style_Upgraded_Trunion_Kit_Gen_V_LT1_LT4_LV3_L83_L86_01_rp Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86

      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86
      Rocker Arms with Bushing Style Upgraded Trunion Kit. Gen V LT1 LT4 LV3 L83 L86. Send in your reusable Gen V Rocker arms and. 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade. The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O. Or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion. These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion’s center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. Bronze Bushing Style Bearing. The item “Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86″ is in sale since Tuesday, September 11, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam, Antigua and barbuda, Aruba, Belize, Dominica, Saint kitts and nevis, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Iceland, Jordan, Cayman islands, Sri lanka, Martinique, Nicaragua, Oman, Peru, Pakistan, Paraguay, Uruguay.
      • Interchange Part Number: trunnion, Retro-Fit,
      • Manufacturer Part Number: A3100+74300 Installed
      • Other Part Number: trunnion
      • Brand: Michgian Motorsports

      Rocker Arms with Bushing Style Upgraded Trunion Kit Gen V LT1 LT4 LV3 L83 L86

      Tags: , , , , ,

    • rocker Comments Off
      LS1_Rocker_Arms_with_Upgraded_Trunion_Kit_Installed_fits_4_8_5_3_5_7_6_0_LS2_LS6_01_fs LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6

      LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6
      Michigan Motorsports LS Rocker Arms with Upgraded Trunion Bearings Installed. See our other listing if you want upgraded bolts included. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor. We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure. Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 4.8/5.3/5.7/6.0/ Engines This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit. Install the upgraded rocker arms to the cylinder heads using socket head cap screws. Be sure to rotate the trunion so that the flat recess side of the trunion’s center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. We are Michigan Motorsports. Our mission is to provide the highest quality, fairest priced auto and diesel parts, backed by excellent customer service resulting in the ultimate shopping experience. Some of our top products include LS Rocker Arms, Trunion Kits, Extension Harnesses, Coil Relocation Kits, and various other LS Engine Swap items. Visit our online store for all your automotive and diesel part needs! The item “LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6″ is in sale since Friday, November 18, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Rocker Arms & Parts”. The seller is “michiganmotorsports” and is located in Niles, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Bahamas, Viet nam.
      • Interchange Part Number: trunnion
      • Manufacturer Part Number: 25100-no bolts
      • Brand: Michigan Motorsports

      LS1 Rocker Arms with Upgraded Trunion Kit Installed fits 4.8 5.3 5.7 6.0 LS2 LS6

      Tags: , , , , ,