-
nissan Comments Off
Mens / Womens Shavers. InCarTec FK-306 Fascia Fitting kit For Nissan. Complete fitting kit to install a Single or Double DIN aftermarket head unit and retain the original steering wheel controls in Nissan 350Z car model with factory fitted BOSE audio systems. Single / Double Din Fascia Adaptor Panel (ANTHRACITE BLACK). Steering Control Interface with Phono Connectors. Universal Patch Lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version Fits Nissan 350Z Coupe and Roadster with the facelift dashboard. The facelift dashboard has the hazard warning light switch below the air conditioning controls and ahead of the gearstick and a larger silver plastic piece around the gear stick – as opposed to the simple silver ring around the gear stick on the pre-facelift dashboard. A removable pocket is provided for Single DIN installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and radio adapter cable for Nissan cars, with 16 and 8 pin connectors, to fit an aftermarket radio upgrade. The cable adapts from the Nissan twin 10 and 6 pin connectors and the smaller 16 pin connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. This adapter cable also retains the use of the original Bose amplifier by using the preout connections on the back of the new radio. The steering wheel control interface is built in to the adapter cable. The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
Tags: 2006-2010, 350z, audio, bose, double, fitting, nissan, stereo, upgrade, with
-
nissan Comments Off
Nissan – Navara / Navara NP300 (D23) (2016 – 2019). Complete stereo upgrade kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a 2015 onward Nissan Navara (Matt Black). The fitting kit includes a matt black car radio fascia adapter panel (50-979) to allow the fitting of an aftermarket double din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses the cars original radio brackets. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A steering wheel control interface (29-CTSNS014) is also included. The cable adapts from the original Nissan connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. It also retains the original/ factory features such as date, time and temperature and also allows you to retain the OEM camera on the car (If applicable). A universal patch lead (29-CT-25) is supplied in the kit, this is to pair the steering control interface to the steering control input of Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese/unbranded head units. An antenna adapter is included in the kit (21-118). This adapts from the original style antenna connectors in the car to a standard aftermarket connector for the new stereo.
Tags: complete, control, double, fitting, navara, nissan, steering, upgrade
-
nissan Comments Off
Mens / Womens Shavers. Double Din Fascia Adapter – Matt Black. Steering Wheel control interface. Rectangle to Din Car Aerial Antenna Adapter Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Car radio fascia adaptor panel to allow the fitting of an aftermarket Double Din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. (20 pin) Steering Wheel Control Interface. Steering wheel control interface and adapter cable for Nissan Qashqai cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. (6 function steering wheels). (Grey Rectangle to DIN connector) Antenna Adapter (With male bullet connection). Nissan (grey rectangle female antenna to male DIN connection) car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, used when fitting a new aftermarket stereo. The loose blue wire (male bullet) on the adapter needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
Tags: 2007-2013, double, fitting, nissan, qashqai, stereo, upgrade
-
nissan Comments Off
Mens / Womens Shavers. Single/Double Din Fascia Adapter (Matt Black). Steering Wheel Control Interface Adaptor. Aerial Antenna Adapter Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. For vehicles with navigation systems and factory fitted reverse camera please use FK-644-SWC-CAM. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement audio fascia to enable you to change the original radio in the vehicle to a Double DIN aftermarket version. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A pocket is provided for Single DIN installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. (6 function steering wheels). This interface fits cars with the newer 20 way car audio connector that has two larger size terminals at either end of the connector. These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit. Connect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit. Loose black wire – Connect the radio ground earth ring to the vehicles chassis ground. Loose pink wire – Connect the pink wire to the speed pulse connector on the aftermarket radio (Not all radios have this, please check manufacturers instructions). Loose blue wire (Amplifier turn-on) – This is only required on amplified systems such as BOSE. Loose blue wire (Antenna turn-on) – This needs to be connected to the antenna turn on cable on the antenna adapter cable. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Nissan (grey rectangle female antenna to male DIN connection) car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, used when fitting a new aftermarket stereo. The loose blue wire (male bullet) on the adapter needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
Tags: controls, fitting, nissan, nv200, singledouble, steering, stereo, upgrade
-
nissan Comments Off
Mens / Womens Shavers. InCarTec FK-972 Nissan Juke (2014 – 2019) Double Din Car Stereo Upgrade Fitting Kit (GLOSS BLACK). Double Din Fascia With Bracket (Gloss Black). Steering Control Interface (20 pin). Rectangle to Din Car Aerial Antenna Adaptor Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. 1st GEN Facelift (F15). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This facia includes side fixing brackets so no fitting cage is required. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Nissan Juke cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. (8 function steering wheels). Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. For Single DIN installation you will require an additional pocket. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
Tags: 2014-2019, black, double, fitting, gloss, juke, nissan, stereo, upgrade
-
nissan Comments Off
Nissan Navara Timing Chain genuine duplex upgrade supplied & fitted. We are Nissan Navara D40 & Pathfinder R51 specialists with 30 years experience. We offer this on a same day service. Note we will not fit none genuine item due there failure rate, we have these vehicles in continuously with every make available other than genuine with failed chains resulting in fill engine builds. We have sourced genuine parts & put our kits together, we have fitted over a 1000 timing kits.
Tags: chain, duplex, fitted, genuine, navara, nissan, timing, upgrade
-
nissan Comments Off
A to Z Motor Spares (Wakefield). For Aventura Cabstar Navara 2.5 YD25 BGA Duplex Timing Chain Upgrade oil filter. SAVE TIME AND LABOUR COSTS WITHOUT COMPROMISING. This kit has been specially designed by expert engineers who have identified that the problematic D40 engines that where made after 2006 and used 1 single (simplex) chain and 1 twin (duplex) kit which is very weaker than the earlier type fitted upto 2006 as they where fitted with 2 double (duplex) chain kit. All our Timing chain kits are made to match or exceed original equipment quality and come complete with a 12 months guarantee for extra piece of mind along with all the necessary parts required to do the perfect job. CABSTAR 2.5 Dci 2005 2006 2007 2008 2009 2010 2011 2012 2013. AVENTURA (R51) – 2.5 dCi 2005 2006 2007 2008 2009. NAVARA (D40) – 2.5 dCi 2005 2006 2007 2008 2009. PATHFINDER (R51) – 2.5 dCi 4WD 2005 2006 2007 2008 2009. WILL FIT ALL NISSAN 2.5 DIESEL ENGINES FITTED TO D40, R51 2.5 dci. 144BHP, 171BHP, 174BHP, 190BHP. TO CONVERT THE NISSAN YD25DDTI 2006, 2007, 2008, 2009 YEARS ONLY. WILL ONLY FIT THE NISSAN CABSTAR WITH THE 2.5 DIESEL YD25 ENGINE FITTED. WILL NOT FIT MODELS MADE IN OR AFTER 2010. Please look at our image closely as what you see in the image is exactly what you will receiving. 1 X Upgraded heavy duty modified, reinforced and treated Vacum pump Drive pulley sprocket. 2 x BGA Duplex twin chain. 8 x BGA Guide Rail’s. 2 x BGA Tensioner’s. 4 x BGA Gear’s. 2 x Nissan Specific 4 litres cans of 5w/30 engine oil (8 litres in total). 1 x Genuine Bosch Oil filter. PLEASE NOTE THAT ALL TIMING CHAINS ARE PRECISION AND THEREFORE. REQUIRE TO BE INSTALLED BY A QUALIFIED AND SKILLED PROFESSIONAL. TECHNICIAN IN ACCORDANCE WITH VEHICLE MANUFACTURERS SPECIFICATIONS INCLUDING TORQUE SETTINGS. GASKETS SHOULD ONLY BE FITTED ON DRY SURFACES AND UNDER NO CIRCUMSTANCE SHOULD SEALANTS BE USED AS THEY WILL CAUSE INCORRECT SEALING OF THE TWO SURFACES. WE STRONGLY RECOMMEND THAT NO MATTER HOW NEW THE ENGINE OIL IS YOU FLUSH AND REPLACE WITH THE CORRECT GRADE / SPECIFICATION AND AMOUNT SO THAT THE HYDRAULIC CHAIN AND TENSIONERS CAN FUNCTION CORRECTLY. WE AT AZCARPARTS WILL NOT BE HELD RESPONSIBLE FOR MIS-TIMED ENGINES, FAILURES OR ANY TYPE OF LOSS OCCURRED. We make every effort to deliver goods within the estimated timescale. However delays are occasionally inevitable due to unforeseen circumstances. We recommend you do not book your vehicle in for any repairs until you physically have the part to save on any disappointment caused by delays. Azcarparts Wakefield will be under no liability for any costs on damages or expenses caused by any delays. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Engines & Engine Parts\Timing Components & Kits\Timing Kits”. The seller is “atozwakefield” and is located in this country: GB. This item can be shipped worldwide.- Brand: BGA
- YEAR OF MANUFACTURE: WILL ONLY FIT 2005-2009 MODELS ONLY
- Note To Buyer: WILL ONLY FIT 2005-2009 MODELS ONLY
- Note To Buyer !: WILL ONLY FIT 2005-2009 MODELS ONLY
Tags: aventura, chain, duplex, filter, navara, nissan, timing, upgrade, yd25
-
nissan Comments Off
Nissan Navara 2015> double DIN complete stereo upgrade fitting kit with steering control interface. Complete stereo upgrade kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a 2015 onward Nissan Navara (Matt Black). Nissan – Navara / Navara NP300 (D23) (2014 >). This head unit fitting kit includes. Matt black double DIN fascia Panel (50-979). Steering wheel control interface (29-CTSNS014). Universal patch lead for steering wheel control interface (29-CT-025). Nissan grey rectangle to DIN Antenna adapter cable (21-118). Complete stereo upgrade kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a 2015 onward. Nissan Navara (Matt Black). The fitting kit includes a matt black car radio fascia adapter panel (50-979) to allow the fitting of an aftermarket double din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A steering wheel control interface (29-CTSNS014) is also included. The cable adapts from the original Nissan connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. It also retains the original/ factory features such as date, time and temperature and also allows you to retain the OEM camera on the car (If applicable). A universal patch lead (29-CT-25) is supplied in the kit, this is to pair the steering control interface to the steering control input of Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese/unbranded head units. An antenna adapter is included in the kit (21-118). This adapts from the original style antenna connectors in the car to a standard aftermarket connector for the new stereo. The item “Nissan Navara 2014 Double DIN Complete Stereo Upgrade Fitting Kit MATT BLACK” is in sale since Monday, June 21, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “liquidice-2008″ and is located in Newton Abbot. This item can be shipped to United Kingdom.- Modified Item: No
- Colour: Black
- Custom Bundle: Yes
- Warranty Period: 1 YEAR
- Unit Quantity: 1 FITTING KIT
- Type: FITTING KIT
- Manufacturer Part Number: FK-979
- Finish: Plastic
- Reference OE/OEM Number: FK-979
- Other Part Number: FK-979
- Brand: Nissan
- Placement on Vehicle: Front
- Performance Part: Yes
- Manufacturer Warranty: 1 Year
- Features: Easy Installation
Tags: black, complete, double, fitting, matt, navara, nissan, stereo, upgrade
Recent Comments