• Category:

    • fk-369 Comments Off
      FK_369_Car_Double_Din_Fascia_Upgrade_Fitting_Kit_for_Peugeot_Bipper_2009_01_sddd FK-369 Car Double Din Fascia Upgrade Fitting Kit for Peugeot Bipper 2009

      FK-369 Car Double Din Fascia Upgrade Fitting Kit for Peugeot Bipper 2009
      Mens / Womens Shavers. InCarTec FK-369 Fitting Kit for Peugeot. Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Citroen Nemo, Peugeot Bipper or Fiat Fiorino/ Qubo vehicles. Double Din Fascia Adapter (MATT BLACK). Double Din Metal Cage Kit (103mm high). Steering Wheel Control Interface ISO Connections. ISO to DIN Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Double Din Metal Cage Kit 103mm High. Car audio metal cage kit and trim 103mm high. Needed with some Double DIN fascia’s that do not fit the normal 113mm cages supplied with aftermarket head-units. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. CANbus steering wheel control interface for Alfa Romeo and Fiat vehicles with older style ISO connections. This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made. THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers. This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna adapter cable for European cars that have an ISO original style antenna cable. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers. Some modification to the original dashboard is required. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.
      • Country/Region of Manufacture: China
      • Material: Plastic
      • Manufacturer Part Number: FK-369/P
      • Brand: IncarTec
      • Manufacturer Warranty: 2 Years
      • EAN: 7427282657822

      FK-369 Car Double Din Fascia Upgrade Fitting Kit for Peugeot Bipper 2009

      Tags: , , , , , ,

    • fk-369 Comments Off
      FK_369_Car_Double_Din_Fascia_Upgrade_Fitting_Kit_for_Citroen_Nemo_2008_01_aipw FK-369 Car Double Din Fascia Upgrade Fitting Kit for Citroen Nemo 2008

      FK-369 Car Double Din Fascia Upgrade Fitting Kit for Citroen Nemo 2008
      Mens / Womens Shavers. InCarTec FK-369 Fitting Kit for Citroen. Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Citroen Nemo, Peugeot Bipper or Fiat Fiorino/ Qubo vehicles. Double Din Fascia Adapter (MATT BLACK). Double Din Metal Cage Kit (103mm high). Steering Wheel Control Interface ISO Connections. ISO to DIN Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Double Din Metal Cage Kit 103mm High. Car audio metal cage kit and trim 103mm high. Needed with some Double DIN fascia’s that do not fit the normal 113mm cages supplied with aftermarket head-units. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. CANbus steering wheel control interface for Alfa Romeo and Fiat vehicles with older style ISO connections. This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made. THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers. This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna adapter cable for European cars that have an ISO original style antenna cable. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers. Some modification to the original dashboard is required. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.
      • Country/Region of Manufacture: China
      • Material: Plastic
      • Manufacturer Part Number: FK-369
      • Brand: IncarTec
      • Manufacturer Warranty: 2 Years
      • EAN: 7427282657808

      FK-369 Car Double Din Fascia Upgrade Fitting Kit for Citroen Nemo 2008

      Tags: , , , , , ,

    • fk-369 Comments Off
      FK_369_Car_Double_Din_Fascia_Upgrade_Fitting_Kit_for_Fiat_Fiorino_Qubo_01_oy FK-369 Car Double Din Fascia Upgrade Fitting Kit for Fiat Fiorino, Qubo

      FK-369 Car Double Din Fascia Upgrade Fitting Kit for Fiat Fiorino, Qubo
      Mens / Womens Shavers. InCarTec FK-369 Fitting Kit for Fiat. Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Citroen Nemo, Peugeot Bipper or Fiat Fiorino/ Qubo vehicles. Double Din Fascia Adapter (MATT BLACK). Double Din Metal Cage Kit (103mm high). Steering Wheel Control Interface ISO Connections. ISO to DIN Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Double Din Metal Cage Kit 103mm High. Car audio metal cage kit and trim 103mm high. Needed with some Double DIN fascia’s that do not fit the normal 113mm cages supplied with aftermarket head-units. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. CANbus steering wheel control interface for Alfa Romeo and Fiat vehicles with older style ISO connections. This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made. THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers. This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna adapter cable for European cars that have an ISO original style antenna cable. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers. Some modification to the original dashboard is required. You have a choice from the following patch leads. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.
      • Country/Region of Manufacture: China
      • Material: Plastic
      • Manufacturer Part Number: FK-369/F
      • Brand: Incar Tec
      • Manufacturer Warranty: 2 Years
      • EAN: 7427282657815

      FK-369 Car Double Din Fascia Upgrade Fitting Kit for Fiat Fiorino, Qubo

      Tags: , , , , , , ,