Mens / Womens Shavers. InCarTec FK-982-PDC Citroen C3, DS3 Double Din Car Stereo Upgrade Fitting Kit (WITH SWC and PDC). The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio. Double Din Fascia Kit (Matt Black). Steering Wheel Control / Parking Sensor Retention Interface. Fakra to DIN Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Only suitable for vehicles with steering wheel controls and factory parking sensors. Dashboard modifications are required, we strongly recommended installation by a professional car audio installer. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses the original radio brackets for installation of the new radio. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio. This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo. It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio. This interface will also allow you to access the Settings menu on the cars screen menu to change time and date. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
Recent Comments