• Category:

    • volkswagen Comments Off
      Volkswagen_Golf_MK4_1997_to_2006_Front_Control_Arm_Upgrade_Kit_01_ht Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit

      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      You will not increase noise, vibration or harshess with these arms. They will give you many years of perfect alignment and control. Upgrade the front control arms for a minimal cost on your MK4 VW Golf 1J (1997 to 2006) with SuperPro’s OEM+ Front Control Arm Kit. Replaces both front control arms for the most straightforward and best repair/upgrade on the market. Complete lower control arms & bushing assemblies offer increased strength and performance. Greatly reduced install time/cost with a complete bolt-on solution. These do not suit the 4WD vehicles based on the MK4 Golf platform, only the front-wheel drive models. Set of pre-assembled front lower control arms. SuperPro standard alignment bushings & new uprated ball joints. A perfect repair-upgrade solution. You must have professional wheel alignment on the vehicle after installation to ensure correct operation and safety.
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit

      Tags: , , , ,

    • volkswagen Comments Off
      Volkswagen_Golf_MK4_1997_to_2006_Front_Control_Arm_Upgrade_Kit_01_io Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit

      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit
      You will not increase noise, vibration or harshess with these arms. They will give you many years of perfect alignment and control. Upgrade the front control arms for a minimal cost on your MK4 VW Golf 1J (1997 to 2006) with SuperPro’s OEM+ Front Control Arm Kit. Replaces both front control arms for the most straightforward and best repair/upgrade on the market. Complete lower control arms & bushing assemblies offer increased strength and performance. Greatly reduced install time/cost with a complete bolt-on solution. These do not suit the 4WD vehicles based on the MK4 Golf platform, only the front-wheel drive models. Set of pre-assembled front lower control arms. SuperPro standard alignment bushings & new uprated ball joints. A perfect repair-upgrade solution. You must have professional wheel alignment on the vehicle after installation to ensure correct operation and safety.
      Volkswagen Golf MK4 1997 to 2006 Front Control Arm Upgrade Kit

      Tags: , , , ,

    • volkswagen Comments Off
      Volkswagen_Golf_Mk5_2004_2008_165mm_6_5_Inch_BLAM_speaker_upgrade_fitting_kit_01_swsz Volkswagen Golf Mk5 2004-2008 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

      Volkswagen Golf Mk5 2004-2008 165mm (6.5 Inch) BLAM speaker upgrade fitting kit
      VW/ Skoda 165mm (6.5 Inch) complete speaker upgrade fitting kit. Provide a full sound upgrade to your Volkswagen or Skoda’s front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits Volkswagen group vehicles including the Volkswagen Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Please see our compatibility list for more cars that can benefit from this upgrade kit. This speaker upgrade kit offers a significant upgrade in audio quality when fitted with the original head unit in the vehicle. It also works very well with aftermarket head units and amplifiers. This complete speaker fitting kit includes. 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS). With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience. 165mm VW Golf Mk5 speaker adapter panels (40-1033-165). Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort. These extra depth 70mm speaker panels are suitable for front doors on select VW vehicles including Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Also fit Skoda Octavia II, III and Skoda Superb car models. Specially modified VW speaker adapter cable harness. These custom made speaker adapter cables suit a variety of Volkswagen group cars and van and make fitting new component speakers a breeze. Joined with bullet connections for ease of installation, the pair of cables adapt from the original speaker connection in the door and have enough length to be routed around the door and through trunking to even reach tweeters located in the A pillars. 2 x Skinz expert sound deadening sheets. Skinz Expert sound deadening sheets provide ultra-effective noise deadening and vibration control on sheet metal and plastic surfaces. It can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
      Volkswagen Golf Mk5 2004-2008 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

      Tags: , , , , , , , ,

    • volkswagen Comments Off
      Volkswagen_Touareg_2003_2018_165mm_6_5_Inch_BLAM_speaker_upgrade_fitting_kit_01_nm Volkswagen Touareg 2003 2018 165mm (6.5 Inch) BLAM speaker upgrade fitting kit
      Volkswagen Touareg 2003 2018 165mm (6.5 Inch) BLAM speaker upgrade fitting kit
      Volkswagen Touareg 2003 2018 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

      Volkswagen Touareg 2003 2018 165mm (6.5 Inch) BLAM speaker upgrade fitting kit
      VW/ Skoda 165mm (6.5 Inch) complete speaker upgrade fitting kit. Provide a full sound upgrade to your Volkswagen or Skoda’s front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits Volkswagen group vehicles including the Volkswagen Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Please see our compatibility list for more cars that can benefit from this upgrade kit. This speaker upgrade kit offers a significant upgrade in audio quality when fitted with the original head unit in the vehicle. It also works very well with aftermarket head units and amplifiers. This complete speaker fitting kit includes. 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS). With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience. 165mm VW Transporter speaker adapter panels (40-1033-165). Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort. These extra depth 70mm speaker panels are suitable for front doors on select VW vehicles including Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Also fit Skoda Octavia II, III and Skoda Superb car models. Specially modified VW speaker adapter cable harness. These custom made speaker adapter cables suit a variety of Volkswagen group cars and van and make fitting new component speakers a breeze. Joined with bullet connections for ease of installation, the pair of cables adapt from the original speaker connection in the door and have enough length to be routed around the door and through trunking to even reach tweeters located in the A pillars. 2 x Skinz expert sound deadening sheets. Skinz Expert sound deadening sheets provide ultra-effective noise deadening and vibration control on sheet metal and plastic surfaces. It can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system. The doors on T5 and T6 transporters can get wet inside due to rain getting past the weather strip below the window which then drains from the bottom of the door. To protect the speakers from this moisture we offer optional silicon baffles which create a splash proof seal around the back of the speaker against the outer door skin with the added benefit of reducing interference between sound from the front and rear of the speaker. The 200mm silicone baffles can be found here. May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bowers and Wilkens or Harman Karon have different speakers with different connections. Please check your original speaker connections match the picture before purchasing.
      Volkswagen Touareg 2003 2018 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

      Tags: , , , , , , ,

    • volkswagen Comments Off
      Volkswagen_Crafter_2017_ON_Radio_Stereo_Upgrade_Fitting_Kit_Fits_VW_Crafter_01_tqmd Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter

      Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter
      Mens / Womens Shavers. InCarTec FK-399 Fitting kit For Volkswagen. Complete stereo upgrade fitting kit to allow the fitting of an aftermarket Single DIN car stereo upgrade. Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units. The fitting kit includes a car radio fascia adapter panel to allow the fitting of an aftermarket car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with side fixing brackets so a radio can be installed without the need for a fitting cage. The fascia can also be used with a 103mm fitting cage. A radio replacement adapter cable is included too. The adapter cable allows the fitting of an aftermarket stereo upgrade by adapting the original 52 pin quadlock connector in the vehicle to standard aftermarket ISO connectors. The built in CANbus interface makes installation plug and play and also provides an ignition power supply to the new radio, this saves needing to find an ignition power supply from the fusebox. The CANbus interface will also give an additional output of your choice, either illumination, handbrake, speed pulse or reverse gear. The cable has an extension to allow the original radio to be reconnected in order to change the some of the vehicle settings such as time and date and VSC on/off. Fitting instructions are supplied with the adapter cable. An antenna adapter cable is in the fitting kit, this cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. VW Crafter ISO lead with CAN IGN/ Service Harness. Phantom 12V Fakra to DIN aerial adapter. Compatible with following vehicles. Car Make / Model. 2nd Gen (Type: SY/SZ). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. The wiring harness will allow to install the stereo. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units (As Pictured Below). See the image below that shows the available space behind the original radio. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.
      • Brand: InCarTec
      • Manufacturer Warranty: 2 Years
      • Manufacturer Part Number: FK-399
      • Material: Plastic
      • Country/Region of Manufacture: China
      • EAN: 7427282708814

      Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter

      Tags: , , , , , ,

    • volkswagen Comments Off
      1953_1970_Volkswagen_Wire_Harness_Upgrade_Kit_fits_painless_update_new_fuse_01_wm 1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse

      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 – 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse. This product data sheet is originally written in English. National Speed Depot is your one stop connection for all your speed and performance parts. We don’t just sell parts, we use them too! Our seasoned support crew has over 500 years of combined experience to help you find the right part every time. National Speed Depot offers a large selection of the best brands from around the world. No one beats NSP on price and service. From the track to the street your always a winner when your with National Speed Depot! National Speed Automotive Supply. 1953 – 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Gauge Sub-Harness –> Not Included Feature –> 12V Compatibility This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. We do not accept COD packages. In some cases stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. Toll Free Tech Support. Plug n Play Technology. Turn Signal & Flasher Harness. 7 x 2 x 2. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\Other Starters, Alternators, ECUs & Wiring”. The seller is “nationalspeeddepot” and is located in this country: US. This item can be shipped worldwide.
      • Support: Toll Free Tech Support
      • Feature: High Quality Wire
      • Fuses: 15
      • Plug n Play Technology: Included
      • Turn Signal & Flasher Harness: Yes
      • Accessory Kit: Yes
      • Brand: National Speed Automotive Supply
      • Prewired Harness: Yes
      • Extra Wire: Yes
      • Prewired Terminals: 118
      • Vintage Car Part: Yes
      • Instructions: Detailed instructions
      • Warranty: Limited Lifetime Warranty
      • Circuits: 24
      • Dimmer Switch: No
      • Designed Location: USA
      • Engine Harness: Yes
      • Fuse Cover: Yes
      • Fuse Box Dimensions: 7 x 2 x 2
      • Built in Relay: Yes
      • Ignition Switch: No
      • Manufacturer Part Number: ZSSA9E24
      • Color Coded: Yes
      • Labeled Wire: Yes
      • Headlight Switch: No
      • Size: Ultra Small Design

      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse

      Tags: , , , , , , ,

    • volkswagen Comments Off
      1971_1980_Volkswagen_Wire_Harness_Upgrade_Kit_fits_painless_circuit_terminal_01_jtr 1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal

      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 – 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal. This product data sheet is originally written in English. National Speed Depot is your one stop connection for all your speed and performance parts. We don’t just sell parts, we use them too! Our seasoned support crew has over 500 years of combined experience to help you find the right part every time. National Speed Depot offers a large selection of the best brands from around the world. No one beats NSP on price and service. From the track to the street your always a winner when your with National Speed Depot! National Speed Automotive Supply. 1971 – 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Gauge Sub-Harness –> Not Included Feature –> 12V Compatibility This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. We do not accept COD packages. In some cases stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. Toll Free Tech Support. Plug n Play Technology. Turn Signal & Flasher Harness. 7 x 2 x 2. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\Other Starters, Alternators, ECUs & Wiring”. The seller is “nationalspeeddepot” and is located in this country: US. This item can be shipped worldwide.
      • Support: Toll Free Tech Support
      • Feature: High Quality Wire
      • Fuses: 15
      • Plug n Play Technology: Included
      • Turn Signal & Flasher Harness: Yes
      • Accessory Kit: Yes
      • Brand: National Speed Automotive Supply
      • Prewired Harness: Yes
      • Extra Wire: Yes
      • Prewired Terminals: 118
      • Vintage Car Part: Yes
      • Instructions: Detailed instructions
      • Warranty: Limited Lifetime Warranty
      • Circuits: 24
      • Dimmer Switch: No
      • Designed Location: USA
      • Engine Harness: Yes
      • Fuse Cover: Yes
      • Fuse Box Dimensions: 7 x 2 x 2
      • Built in Relay: Yes
      • Ignition Switch: No
      • Manufacturer Part Number: ZSSA9E2D
      • Color Coded: Yes
      • Labeled Wire: Yes
      • Headlight Switch: No
      • Size: Ultra Small Design

      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal

      Tags: , , , , , , ,

    • volkswagen Comments Off
      1971_1980_Volkswagen_Wire_Harness_Upgrade_Kit_fits_painless_circuit_terminal_01_hhdi 1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal

      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal
      Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicles performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1971 – 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal. 1971 – 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal” is in sale since Friday, August 27, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Other Starters, Alternators, ECUs & Wiring”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.
      • MPN: ZTP-1709191
      • Brand: TOP END WIRING
      • Vintage Car Part: Yes

      1971 1980 Volkswagen Wire Harness Upgrade Kit fits painless circuit terminal

      Tags: , , , , , , ,

    • volkswagen Comments Off
      1953_1970_Volkswagen_Wire_Harness_Upgrade_Kit_fits_painless_update_new_fuse_01_alk 1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse

      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse
      Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1953 – 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse. 1953 – 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse” is in sale since Monday, April 5, 2021. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Charging & Starting Systems”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.
      • MPN: ZTP-1708959
      • Brand: TOP END WIRING

      1953 1970 Volkswagen Wire Harness Upgrade Kit fits painless update new fuse

      Tags: , , , , , , ,

    • volkswagen Comments Off
      2017_on_Volkswagen_Crafter_and_MAN_TGE_Radio_Stereo_Upgrade_Fitting_Kit_01_hg 2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit

      2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit
      Complete fitting kit to install an aftermarket radio upgrade in a 2017 onward Volkswagen Crafter and Man TGE. This kit is only for vehicles with the original basic radio. The fitting kit includes a car radio fascia adapter panel to allow the fitting of an aftermarket car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with side fixing brackets so a radio can be installed without the need for a fitting cage. The fascia can also be used with a 103mm fitting cage. A radio replacement CANbus adapter cable is included. The adapter cable allows the fitting of an aftermarket stereo upgrade by adapting the original 52 pin quadlock connector in the vehicle to standard aftermarket ISO connectors. The built in CANbus interface makes installation plug and play and also provides an ignition power supply to the new radio, this saves needing to find an ignition power supply from the fusebox. The CANbus interface will also give an additional output of your choice, either illumination, handbrake, speed pulse or reverse gear. The cable has an extension to allow the original radio to be reconnected in order to change the some of the vehicle settings such as time and date and VSC on/off. Fitting instructions for the cable are provided. An antenna adapter cable is in the fitting kit, this cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. Behind the original radio there is only space for a single din body radio, the lower section behind the radio has the ducts for the air vents. Careful attention needs to be payed to the radio that is to be fitted and the modifications that may be required, either to the fascia kit or the vehicle. We strongly recommend the installation is done by an experienced car audio technician only. See the image below that shows the available space behind the original radio. Not suitable for vehicles with original touchscreen radios. The item “2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit” is in sale since Monday, March 15, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Fascia Plates & Panels”. The seller is “phauto-parts” and is located in Tiverton. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam, Russian federation.
      • Manufacturer Part Number: FK-399
      • Brand: Volkswagen

      2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit

      Tags: , , , , ,

    « Previous Entries