• Category:

    • mercedes-benz Comments Off
      Mercedes_Benz_Sprinter_Double_DIN_Stereo_Upgrade_Fitting_Kit_STANDARD_RADIO_01_wa Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)

      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)
      Mens / Womens Shavers. Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Mercedes Sprinter (2019 – 2023) vehicle models with original open dash or single DIN standard radios. Double Din Fascia Adaptor (Matt Black). Steering Wheel Control Interface. Fakra Male to SMB Female DAB Adaptor. Fakra to DIN Antenna Adaptor Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. NOT SUITABLE FOR SPRINTER MODELS WITH FACTORY MBUX SYSTEMS. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. Fits Mercedes Sprinter with original open dash or single DIN radio. Kit includes double DIN fascia panel with side fixing brackets for a professional finish, a radio cage is not required. This fascia will not fit models with MBUX touch screens of either 7″ or 10″. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Universal patch lead for 29-CT series steering controls. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
      Mercedes-Benz Sprinter Double DIN Stereo Upgrade Fitting Kit (STANDARD RADIO)

      Tags: , , , , , , ,

    • iveco Comments Off
      Iveco_Daily_2016_2019_Double_DIN_Stereo_Upgrade_Fitting_Kit_OEM_NAVI_RADIO_01_ai Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)
      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)
      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)
      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)
      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)
      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)

      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)
      Mens / Womens Shavers. Double Din Fascia (Matt Black). CANbus Steering Wheel Control Interface. DIN to DAB/FM Antenna Splitter. Male Fakra to Din Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This kit is for vehicles with original Delphi radios only. Not compatible for vehicles with original touchscreen radios. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement FLUSH FIT car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Iveco Daily vans to fit an aftermarket radio upgrade. The cable adapts from the quadlock connector at the back of the original navigation radio to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake outputs to the new aftermarket stereo. High quality quick fix DAB antenna is for cars with DIN original antenna connectors, it can be used on other cars with the addition of an antenna adapter. This interface amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB. This amplifier takes a separate 12V supply feed, it can also work with the 5V phantom power supplied by most DAB units via the DAB connection. SMB connector for DAB radios. To allow the fitting of a Double DIN stereo some plastics behind the original radio will need to be cut away. We recommend this is done by an experienced car audio technician. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. Universal Patch Lead (29-CT-025). Universal patch lead for 29-CT series steering controls Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
      Iveco Daily (2016-2019) Double DIN Stereo Upgrade Fitting Kit (OEM NAVI RADIO)

      Tags: , , , , , , , ,

    • range Comments Off
      Range_Rover_Vogue_L322_Double_DIN_stereo_upgrade_fitting_kit_BASIC_RADIO_01_zhd Range Rover Vogue/L322 Double DIN stereo upgrade fitting kit (BASIC RADIO)

      Range Rover Vogue/L322 Double DIN stereo upgrade fitting kit (BASIC RADIO)
      Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in Range Rover Vogue/L322 car models with Standard Audio and no amplifier. This head unit fitting kit includes. Antenna adapter cable (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a fakra antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Steering wheel control interface (29-628). Steering wheel control interface and adapter cable for various BMW cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Universal SWC patch lead (29-025). Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. Range Rover Double DIN car audio fascia (50-983). Car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. The fascia is designed to fit Range Rover L322/Vogue car models. PLEASE NOTE: Modifications to the dashboard are required in order to fit the new head unit, we recommend this is done by an experienced car audio technician. This kit is for vehicles with with cars with basic original head units with no amplifier, or cars with basic original head units and the power amplifier fitted. Basic head unit with no amplifier. Basic head unit with power amplifier.
      Range Rover Vogue/L322 Double DIN stereo upgrade fitting kit (BASIC RADIO)

      Tags: , , , , , , , ,

    • volkswagen Comments Off
      Volkswagen_Crafter_2017_ON_Radio_Stereo_Upgrade_Fitting_Kit_Fits_VW_Crafter_01_tqmd Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter

      Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter
      Mens / Womens Shavers. InCarTec FK-399 Fitting kit For Volkswagen. Complete stereo upgrade fitting kit to allow the fitting of an aftermarket Single DIN car stereo upgrade. Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units. The fitting kit includes a car radio fascia adapter panel to allow the fitting of an aftermarket car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with side fixing brackets so a radio can be installed without the need for a fitting cage. The fascia can also be used with a 103mm fitting cage. A radio replacement adapter cable is included too. The adapter cable allows the fitting of an aftermarket stereo upgrade by adapting the original 52 pin quadlock connector in the vehicle to standard aftermarket ISO connectors. The built in CANbus interface makes installation plug and play and also provides an ignition power supply to the new radio, this saves needing to find an ignition power supply from the fusebox. The CANbus interface will also give an additional output of your choice, either illumination, handbrake, speed pulse or reverse gear. The cable has an extension to allow the original radio to be reconnected in order to change the some of the vehicle settings such as time and date and VSC on/off. Fitting instructions are supplied with the adapter cable. An antenna adapter cable is in the fitting kit, this cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. VW Crafter ISO lead with CAN IGN/ Service Harness. Phantom 12V Fakra to DIN aerial adapter. Compatible with following vehicles. Car Make / Model. 2nd Gen (Type: SY/SZ). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. The wiring harness will allow to install the stereo. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units (As Pictured Below). See the image below that shows the available space behind the original radio. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.
      • Brand: InCarTec
      • Manufacturer Warranty: 2 Years
      • Manufacturer Part Number: FK-399
      • Material: Plastic
      • Country/Region of Manufacture: China
      • EAN: 7427282708814

      Volkswagen Crafter 2017 ON Radio Stereo Upgrade Fitting Kit Fits VW Crafter

      Tags: , , , , , ,

    • volkswagen Comments Off
      2017_on_Volkswagen_Crafter_and_MAN_TGE_Radio_Stereo_Upgrade_Fitting_Kit_01_hg 2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit

      2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit
      Complete fitting kit to install an aftermarket radio upgrade in a 2017 onward Volkswagen Crafter and Man TGE. This kit is only for vehicles with the original basic radio. The fitting kit includes a car radio fascia adapter panel to allow the fitting of an aftermarket car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with side fixing brackets so a radio can be installed without the need for a fitting cage. The fascia can also be used with a 103mm fitting cage. A radio replacement CANbus adapter cable is included. The adapter cable allows the fitting of an aftermarket stereo upgrade by adapting the original 52 pin quadlock connector in the vehicle to standard aftermarket ISO connectors. The built in CANbus interface makes installation plug and play and also provides an ignition power supply to the new radio, this saves needing to find an ignition power supply from the fusebox. The CANbus interface will also give an additional output of your choice, either illumination, handbrake, speed pulse or reverse gear. The cable has an extension to allow the original radio to be reconnected in order to change the some of the vehicle settings such as time and date and VSC on/off. Fitting instructions for the cable are provided. An antenna adapter cable is in the fitting kit, this cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. Behind the original radio there is only space for a single din body radio, the lower section behind the radio has the ducts for the air vents. Careful attention needs to be payed to the radio that is to be fitted and the modifications that may be required, either to the fascia kit or the vehicle. We strongly recommend the installation is done by an experienced car audio technician only. See the image below that shows the available space behind the original radio. Not suitable for vehicles with original touchscreen radios. The item “2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit” is in sale since Monday, March 15, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Fascia Plates & Panels”. The seller is “phauto-parts” and is located in Tiverton. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam, Russian federation.
      • Manufacturer Part Number: FK-399
      • Brand: Volkswagen

      2017 on Volkswagen Crafter and MAN TGE Radio Stereo Upgrade Fitting Kit

      Tags: , , , , ,

    • rear Comments Off
      JVC_CD_MP3_USB_Aux_Rear_BOSE_Car_Radio_Stereo_Upgrade_Kit_fit_AUDI_A3_03_05_8P_01_elyx JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI A3-03-05 8P

      JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI A3-03-05 8P
      AUDI A3 8P 2003 – 2005 Bose Rear Amplified JVC KD-R571 CD MP3 USB Aux-In Ipod Iphone Car Radio Complete Fitting Stereo Kit. The JVC KD is an in-car CD/MP3 player with. & Aux In Audi A3 Upgrade Kit. STEREO COMES WITH VARIABLE COLOUR LED DISPLAY SO WILL MATCH YOUR DASH DISPLAY. Converts the Audi Wiring Harness to Speaker Level Inputs for connecting to a new car stereo with ISO Lead. Most Audi’s have active rear speakers built into the speaker themselves. These adaptors convert the new head unit you are fitting to activate the speakers. This adaptor is required to replace factory fitted radio with an aftermarket headunit Alpine, Pioneer, Kenwood, Sony, JVC etc. It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and the other end into your new radio, without the need of tools or cutting of wires. Installation tips that MUST be done to fit this kit. To activate rear speakers, the blue & white wire on the Red mini ISO plug also needs to be connected to the Blue wire coming off of the New Head Unit (marked Amp Remote). Without doing this your new stereo will NOT work the back speakers. Fits the following vehicle. Must have Chorus or Concerts BOSE Rear Amplified Installed. 50 x 4 Watts. CD player: ID3 display. Amplifier: Low pass filter. 1 x Pre amplifier output. Whats in the box. Single Din Facia Panel. We sell anything from In Car Technology to Home and Personal Audio. Our team is committed on dealing with enquiries quickly and efficiently. The item “JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI A3-03-05 8P” is in sale since Monday, March 14, 2016. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Car Stereos & Head Units”. The seller is “eco_uk” and is located in England. This item can be shipped to all countries in Europe.
      • Brand: JVC
      • Unit Size: 1 DIN
      • Head Unit Functionality: Car Radio
      • Features: Aux Input
      • Number of Channels: 4
      • RMS Wattage per Channel: 50
      • Manufacturer Part Number: Does Not Apply
      • Number of Preamplifier Outputs: 1

      JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI A3-03-05 8P

      Tags: , , , , , ,

    • peugeot Comments Off
      Peugeot_308_2013_17_GENUINE_RCC_CAR_PLAY_DAB_RADIO_UPGRADE_KIT_FREE_FITTING_01_ws Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING

      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING
      UPGRADE PACK INCLUDES ALL YOU NEED TO UPGRADE A 308 WITH A SMEG BASED SYSTEM TO THE LATEST RCC SYSTEM. FREE FITTING (WEST YORKSHIRE). GENUINE RCC HEADUNIT. WITH ANDROID AUTO + APPLE CAR PLAY. GENUINE CAPACITIVE TOUCHSCREEN. Includes all three themes activated RED, BLUE, COPPER. DELIVERED CODED TO YOUR VEHICLE READY TO PLUG AND PLAY OR FITTED FREE. Plug and play. Built in WI-FI. Built in Bluetooth. All your current cars features will continue to function. Radar cruise, and auto breaking will continue to function but are no longer able to disable these features. The coding of the system to your car is completed before despatch so when you receive it’s simply plug and play or take advantage of free fitting. Items are security marked and serial numbers retained. The item “Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING” is in sale since Saturday, November 14, 2020. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\GPS & Sat Nav Devices\Built-in Sat Nav”. The seller is “stock_aitken_waterman” and is located in Wakefield. This item can be shipped worldwide.
      • Compatible Vehicle Make: Peugeot

      Peugeot 308 2013-17 GENUINE RCC CAR PLAY DAB RADIO UPGRADE KIT / FREE FITTING

      Tags: , , , , , , ,

    • sony Comments Off
      Sony_CD_MP3_USB_Aux_Rear_BOSE_Car_Radio_Stereo_Upgrade_Kit_fit_AUDI_TT_98_06_MK1_01_vzzs Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1

      Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1
      AUDI TT 8N 1998 – 2006 (MK1) Bose Rear Amplified Sony CD MP3 USB Aux-In Ipod Iphone Car Radio Complete Fitting Stereo Kit. The Sony is an in-car CD/MP3 player with. & Aux In Audi TT Upgrade Kit. Converts the Audi Wiring Harness to Speaker Level Inputs for connecting to a new car stereo with ISO Lead. Most Audi’s have active rear speakers built into the speaker themselves. These adaptors convert the new head unit you are fitting to activate the speakers. This adaptor is required to replace factory fitted radio with an aftermarket headunit Alpine, Pioneer, Kenwood, Sony, JVC etc. It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and the other end into your new radio, without the need of tools or cutting of wires. Please note this is not a plug & play kit and some configuration must be done, see below. Installation tips below that MUST be done to fit this kit. To activate the factory speakers, the Blue/White wire on the Red mini ISO plug needs to be spliced into the Blue/White wire coming off of the New Head Units wiring harness (marked as Amp Remote) Without doing this your new stereo will NOT give sound to the speakers. You will also need to connect the red wire of our wiring harness provided within this kit to an ignition point in the vehicle or the new radio will not power up. Connection can be made to an ignition point on the cigarette lighter in your vehicle or straight to a fuse box ignition point. Fits the following vehicle. Must have Chorus Symphony or Concerts BOSE Rear Amplified Radios Installed. Please make sure your car is rear amplified as if it is fully amplified then this kit will not work. If unsure we would need you to take the factory radio out and send us pictures of all the plug connections left in the car when the radio have been disconnected. 55 x 4 Watts. CD player: ID3 display. Amplifier: Low pass filter. Quick Browzer organises your music collection and simplifies selection. DM+ can be enabled, for optimised sound reproduction of MP3 files. Whats in the box. Sony CD MP3 USB AUX Car Stereo. Single Din Facia Panel. We sell anything from In Car Technology to Home and Personal Audio. Our team is committed on dealing with enquiries quickly and efficiently. The item “Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1″ is in sale since Tuesday, November 7, 2017. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Car Stereos & Head Units”. The seller is “eco_uk” and is located in England. This item can be shipped to all countries in Europe.
      • Port: AUX
      • Number of Channels: 4
      • RMS Wattage per Channel: 55
      • Number of Preamplifier Outputs: 1
      • Compatible Vehicle Make: Audi
      • Unit Size: 1 DIN
      • Compatible Vehicle Model: TT
      • Features: Aux Input
      • Compatible Format: CD
      • Manufacturer Part Number: Does Not Apply
      • Brand: Sony
      • Head Unit Functionality: Car Radio

      Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1

      Tags: , , , , , , ,

    • sony Comments Off
      Sony_CD_MP3_USB_Aux_Rear_BOSE_Car_Radio_Stereo_Upgrade_Kit_fit_AUDI_TT_98_06_MK1_01_pog Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98 06 MK1

      Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98 06 MK1
      AUDI TT 8N 1998 – 2006 (MK1) Bose Rear Amplified Sony CD MP3 USB Aux-In Ipod Iphone Car Radio Complete Fitting Stereo Kit. The Sony is an in-car CD/MP3 player with. & Aux In Audi TT Upgrade Kit. Converts the Audi Wiring Harness to RCA/Phono Level Inputs for connecting to a new car stereo with ISO Lead. Most Audi’s have active rear speakers built into the speaker themselves. These adaptors convert the new head unit you are fitting to activate the speakers. Please note this is not a plug & play kit and some configuration must be done, see below. Installation tips below that MUST be done to fit this kit. To activate the factory speakers, the Blue/White wire on the Red mini ISO plug needs to be spliced into the Blue/White wire coming off of the New Head Units wiring harness (marked as Amp Remote) Without doing this your new stereo will NOT give sound to the speakers. You will also need to connect the red wire of our wiring harness provided within this kit to an ignition point in the vehicle or the new radio will not power up. Connection can be made to an ignition point on the cigarette lighter in your vehicle or straight to a fuse box ignition point. Fits the following vehicle. Must have Chorus Symphony or Concerts BOSE Rear Amplified Radios Installed. Please make sure your car is rear amplified as if it is fully amplified then this kit will not work. If unsure we would need you to take the factory radio out and send us pictures of all the plug connections left in the car when the radio have been disconnected. 55 x 4 Watts. CD player: ID3 display. Amplifier: Low pass filter. Quick Browzer organises your music collection and simplifies selection. DM+ can be enabled, for optimised sound reproduction of MP3 files. Whats in the box. Sony CD MP3 USB AUX Car Stereo. Single Din Facia Panel. We sell anything from In Car Technology to Home and Personal Audio. Our team is committed on dealing with enquiries quickly and efficiently. The item “Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98 06 MK1″ is in sale since Tuesday, November 7, 2017. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Car Stereos & Head Units”. The seller is “eco_uk” and is located in England. This item can be shipped to all countries in Europe.
      • Port: AUX
      • Number of Channels: 4
      • RMS Wattage per Channel: 55
      • Number of Preamplifier Outputs: 1
      • Compatible Vehicle Make: Audi
      • Unit Size: 1 DIN
      • Compatible Vehicle Model: TT
      • Features: Aux Input
      • Compatible Format: CD
      • Manufacturer Part Number: Does Not Apply
      • Brand: Sony
      • Head Unit Functionality: Car Radio

      Sony CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98 06 MK1

      Tags: , , , , , ,

    • rear Comments Off
      JVC_CD_MP3_USB_Aux_Rear_BOSE_Car_Radio_Stereo_Upgrade_Kit_fit_AUDI_TT_98_06_MK1_01_hdi JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1

      JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1
      AUDI TT 8N 1998 – 2006 (MK1) Bose Rear Amplified JVC KD-R571 CD MP3 USB Aux-In Ipod Iphone Car Radio Complete Fitting Stereo Kit. The JVC KD-R482 features a classy design which will look at home in any dashboard. This highly featured RDS Receiver and CD player will reproduce music from many sources. A front panel mounted USB port reads MP3 and WMA files from a memory stick while the neighbouring Aux input will reproduce sound from any external analogue input. Your new JVC car stereo receiver KD-R482 puts you in the driving seat when it comes to listening to your music. Enjoy multiple playable formats including FLAC by connecting your Android smartphone through the front USB port, or play music from other portable devices via the AUX input. A built-in 3 band, 13 preset equalizer gives you the flexibility you need to find a sound that suits you. The KD-R481 with variable colour option has something for everyone. Front USB is ONLY for charging iPod iPhones or use of a memory stick. JVC CD MP3 Car Stereo Features. CD MP3 Car Stereo. MOS-FET 50W x 4 Watts. 1 Preout 2.5V. JVC Playlist Creator for USB Memory/Thumb Drive Windows(R) PC software via USB. Media Playback: WAV / MP3 / WMA. Drive Change Mode for Mass Storage Class. 2.5V Line and Subwoofer Pre-Output Level. Pre-Output Terminals (Rear/Subwoofer Selectable). Steering Wheel Remote Ready (Not included). Please check and make sure you have a Bose Badge on the front door speaker grille. If you have not got this badge then this kit will NOT work. This is not a plug & play kit and some. Configuration must be done, see below. Installation tips below that MUST be done to fit this kit. To activate the factory speakers, the Blue/White wire on the Red mini ISO plug needs to be spliced into the Blue/White wire coming off of the New Head Units wiring harness (marked as Amp Remote) Without doing this your new stereo will NOT give sound to the speakers. You will also need to connect the red wire of our wiring harness provided within this kit to an ignition point in the vehicle or the new radio will not power up. Connection can be made to an ignition point on the cigarette lighter in your vehicle or straight to a fuse box ignition point. Fits the following vehicle. Must have Chorus Symphony or Concerts BOSE Rear Amplified Radios Installed. Rear amplified Audi System ONLY. Please make sure your car is rear amplified as if it is fully amplified then this kit will not work. If unsure we would need you to take the factory radio out and send us pictures of all the plug connections left in the car when the radio have been disconnected. Whats in the box. Single Din Facia Panel. We sell anything from In Car Technology to Home and Personal Audio. Our team is committed on dealing with enquiries quickly and efficiently. The item “JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1″ is in sale since Tuesday, October 13, 2015. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Car Stereos & Head Units”. The seller is “eco_uk” and is located in GB. This item can be shipped to all countries in Europe.
      • Number of Channels: 4
      • RMS Wattage per Channel: 50
      • Number of Preamplifier Outputs: 1
      • Unit Size: 1 DIN
      • Features: Aux Input
      • Manufacturer Part Number: Does Not Apply
      • Brand: JVC
      • Head Unit Functionality: Car Radio

      JVC CD MP3 USB Aux Rear BOSE Car Radio Stereo Upgrade Kit fit AUDI TT 98-06 MK1

      Tags: , , , , , ,

    « Previous Entries