Upgrade Kit Fits

• 21Jul

  Ford C-Max (2010-2019) Kuga (2013-2019) Double DIN stereo upgrade fitting kit

  ford Comments Off
  
  
  
  Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio, retain the use of the steering wheel audio controls and parking sensors tones (If equipped) in select Ford C-MAX (2010 onwards) and Ford Kuga (2012 onwards) car models. The interface in this fitting kit also maintains date, time & temperature display and retains the OEM parking sensor audio by using a new parking buzzer. Also includes CAN ignition and speed pulse for Navigation systems. PLEASE NOTE: Sometimes the built-in combination switch cannot be removed from the vehicles factory fitted fascia surround and must be replaced. An additional Lock/ Hazard Switch (FORD-F1519127) is included if the original cannot be retained. This complete head unit fitting kit includes. Fakra to DIN antenna adapter (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Steering wheel control/ parking sensor retention interface (29-CTF08). CAN-Bus Steering Wheel Control Interface for Ford (2012 Onwards) vehicle models. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel. Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also maintains date, time & temperature display, OEM parking sensor audio with new parking buzzer. Includes CAN ignition and speed pulse for Navigation systems. Universal patch lead (29-CT-025). Universal patch lead for 29-CT series steering controls. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed. Double DIN fascia kit (50-892). Car radio fascia adaptor panel to allow the fitting of an aftermarket double din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. This fascia is designed to fit select Ford C-MAX (2010 onwards) and Ford Kuga (2012 onwards) car models. Ford OEM lock and hazard switch (FORD-F1519127). Original Ford lock and hazard switch assembly. Use when changing the radio in a Ford vehicle that has the original locking and hazard switch built into the original radio.
  
  

  Tags: 2010-2019, 2013-2019, c-max, double, fitting, ford, kuga, stereo, upgrade

• 07Jul

  Ford Focus Mk3 (2011-2015) Double DIN stereo upgrade fitting kit WITH SWC + PDC

  ford Comments Off
  
  
  
  The interface in this fitting kit also maintains date, time & temperature display and retains the OEM parking sensor audio by using a new parking buzzer. Also includes CAN ignition and speed pulse for Navigation systems. This complete head unit fitting kit includes. Fakra to DIN antenna adapter (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Steering wheel control/ parking sensor retention interface (29-CTF08). CAN-Bus Steering Wheel Control Interface for Ford (2012 Onwards) vehicle models. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel. Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also maintains date, time & temperature display, OEM parking sensor audio with new parking buzzer. Includes CAN ignition and speed pulse for Navigation systems. Universal patch lead (29-CT-025). Universal patch lead for 29-CT series steering controls. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed. Ford OEM lock and hazard switch (FORD-F1519127). Original Ford lock and hazard switch assembly. Use when changing the radio in a Ford vehicle that has the original locking and hazard switch built into the original radio. Double DIN fascia kit (50-893). Car radio fascia adaptor panel to allow the fitting of an aftermarket double din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation.
  
  

  Tags: 2011-2015, double, fitting, focus, ford, stereo, upgrade

• 12Jun

  Ford EcoSport 2013-2019 Double DIN Stereo Upgrade Fitting Kit (WITH SWC and PDC)

  ford Comments Off
  
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-946-PDC Double Din Stereo Fitting Kit (WITH SWC and PDC). The interface in this fitting kit also maintains date, time & temperature display and retains the OEM parking sensor audio by using a new parking buzzer. Also includes CAN ignition and speed pulse for Navigation systems. Double Din Fascia Kit (GLOSS SILVER). Steering Wheel Control / Parking Sensor Retention Interface. Fakra to DIN Antenna Adapter. Universal Patch Lead (Included). Compatible with following vehicles. Car Make / Model. Some dashboard modification is required for the installation of this product. The OEM stereo cannot be reinstalled after these modifications have been made Sometimes the built-in combination switch cannot be removed from the vehicles factory fitted fascia surround and must be replaced. An Additional Lock/ Hazard Switch (FORD-F1519127). Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. A steering wheel control interface is also included in this kit. This will retain the use of the original audio controls on the steering wheel with the new radio. CAN-Bus Steering Wheel Control Interface. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel. Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also maintains date, time & temperature display, OEM parking sensor audio with new parking buzzer. Includes CAN ignition and speed pulse for Navigation systems. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Universal patch lead for 29-CT series steering controls. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: 2013-2019, double, ecosport, fitting, ford, stereo, upgrade, with

• 12May

  Ford Mondeo MK5 2014 On 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

  ford Comments Off
  
  
  
  
  
  
  
  Provide a full sound upgrade to your Ford front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Ford vehicles including Ford Fiesta, Focus, Ranger, Transit and Mazda BT-50. Please see our compatibility list for more cars that can benefit from this upgrade kit. This speaker upgrade kit offers a significant upgrade in audio quality when fitted with the original head unit in the vehicle. It also works very well with aftermarket head units and amplifiers. This complete speaker fitting kit includes. 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS). With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience. 165mm Ford speaker adapter panels (40-0993-165). A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers. Speaker adapter cables (41-018). A pair of speaker adapter cables for various Ford vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors. 2x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI). A pair of Y cables designed to make fitting component speakers as easy as possible. 2 x Skinz expert sound deadening sheets. Skinz Expert sound deadening sheets provide ultra-effective noise deadening and vibration control on sheet metal and plastic surfaces. It can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system. Nut, bolt and washer pack (SPK-FITTING). A pack of nuts, bolts, washers and spare insulated terminals for fitting a pair of speakers and speaker rings to almost any car. Fits various Ford and Mazda vehicle models. C-MAX 2nd Gen (C344) (2010 – 2019). Fiesta Mk7 (2008 – 2010). Fiesta MK7 (2010 – 2012). Fiesta MK7 Facelift (2012 – 2018). Fiesta Mk8 (2017 Onwards). Focus Mk3 (C346) (2011 – 2018). Focus Mk4 (2018 Onwards). Kuga 2nd Gen (C520) (2013 – 2019). Mondeo MK5 (2014 Onwards). Ranger 3rd Gen (2011 – 2015). Ranger 3rd Gen Facelift (2015 Onwards). Transit Custom MK1 (2013 – 2018). Transit Custom MK1 Facelift (2018 Onwards). Transit MK8 Facelift (2018 Onwards). BT-50 (2nd Gen) UP/UR (2011 – 2020). May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bowers and Wilkens or Harman Karon have different speakers with different connections. Please check your original speaker connections match the picture before purchasing.
  
  

  Tags: 165mm, blam, fitting, ford, inch, mondeo, speaker, upgrade

• 22Feb

  New Ford Ranger In For A Kicker Key And Morel Upgrade Installer Diaries Part1

  ford Comments Off
  

  Tags: diaries, ford, installer, kicker, morel, part1, ranger, upgrade

• 22Feb

  Ford Fiesta MK7 MK8 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

  ford Comments Off
  
  
  
  
  
  
  
  Provide a full sound upgrade to your Ford front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Ford vehicles including Ford Fiesta, Focus, Ranger, Transit and Mazda BT-50. Please see our compatibility list for more cars that can benefit from this upgrade kit. This speaker upgrade kit offers a significant upgrade in audio quality when fitted with the original head unit in the vehicle. It also works very well with aftermarket head units and amplifiers. This complete speaker fitting kit includes. 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS). With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience. 165mm Ford speaker adapter panels (40-0993-165). A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers. Speaker adapter cables (41-018). A pair of speaker adapter cables for various Ford vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors. 2x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI). A pair of Y cables designed to make fitting component speakers as easy as possible. 2 x Skinz expert sound deadening sheets. Skinz Expert sound deadening sheets provide ultra-effective noise deadening and vibration control on sheet metal and plastic surfaces. It can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system. Nut, bolt and washer pack (SPK-FITTING). A pack of nuts, bolts, washers and spare insulated terminals for fitting a pair of speakers and speaker rings to almost any car. Fits various Ford and Mazda vehicle models. C-MAX 2nd Gen (C344) (2010 – 2019). Fiesta Mk7 (2008 – 2010). Fiesta MK7 (2010 – 2012). Fiesta MK7 Facelift (2012 – 2018). Fiesta Mk8 (2017 Onwards). Focus Mk3 (C346) (2011 – 2018). Focus Mk4 (2018 Onwards). Kuga 2nd Gen (C520) (2013 – 2019). Mondeo MK5 (2014 Onwards). Ranger 3rd Gen (2011 – 2015). Ranger 3rd Gen Facelift (2015 Onwards). Transit Custom MK1 (2013 – 2018). Transit Custom MK1 Facelift (2018 Onwards). Transit MK8 Facelift (2018 Onwards). BT-50 (2nd Gen) UP/UR (2011 – 2020). May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bowers and Wilkens or Harman Karon have different speakers with different connections. Please check your original speaker connections match the picture before purchasing.
  
  

  Tags: 165mm, blam, fiesta, fitting, ford, inch, speaker, upgrade

• 05Dec

  Ford Transit Custom 2013 On 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

  ford Comments Off
  
  
  
  
  
  
  
  With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience.
  
  

  Tags: 165mm, blam, custom, fitting, ford, inch, speaker, transit, upgrade

• 01Dec

  Ford Ceo Our New 2024 Ford Ranger Features Shakes Up The Whole Industry

  ford Comments Off
  

  Tags: features, ford, industry, ranger, shakes, whole

• 25Nov

  Ford Ranger 3rd Gen 2011 On 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

  ford Comments Off
  
  
  
  
  
  
  
  With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience.
  
  

  Tags: 165mm, blam, fitting, ford, inch, ranger, speaker, upgrade

• 20Aug

  Ford Kuga 2nd Gen 2013 2019 165mm (6.5 Inch) BLAM speaker upgrade fitting kit

  ford Comments Off
  
  
  
  
  
  
  
  Provide a full sound upgrade to your Ford front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Ford vehicles including Ford Fiesta, Focus, Ranger, Transit and Mazda BT-50. Please see our compatibility list for more cars that can benefit from this upgrade kit. This speaker upgrade kit offers a significant upgrade in audio quality when fitted with the original head unit in the vehicle. It also works very well with aftermarket head units and amplifiers. This complete speaker fitting kit includes. 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS). With their high efficiency and low impedance the BLAM 165RS speakers allow you to achieve a detailed and powerful sound with or without an amplifier. These Hi-efficiency, 2-way component speakers transform your vehicles dull sound system into an enjoyable, high quality audio experience. 165mm Ford speaker adapter panels (40-0993-165). A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers. Speaker adapter cables (41-018). A pair of speaker adapter cables for various Ford vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors. 2x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI). A pair of Y cables designed to make fitting component speakers as easy as possible. 2 x Skinz expert sound deadening sheets. Skinz Expert sound deadening sheets provide ultra-effective noise deadening and vibration control on sheet metal and plastic surfaces. It can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system. Nut, bolt and washer pack (SPK-FITTING). A pack of nuts, bolts, washers and spare insulated terminals for fitting a pair of speakers and speaker rings to almost any car. Fits various Ford and Mazda vehicle models. C-MAX 2nd Gen (C344) (2010 – 2019). Fiesta Mk7 (2008 – 2010). Fiesta MK7 (2010 – 2012). Fiesta MK7 Facelift (2012 – 2018). Fiesta Mk8 (2017 Onwards). Focus Mk3 (C346) (2011 – 2018). Focus Mk4 (2018 Onwards). Kuga 2nd Gen (C520) (2013 – 2019). Mondeo MK5 (2014 Onwards). Ranger 3rd Gen (2011 – 2015). Ranger 3rd Gen Facelift (2015 Onwards). Transit Custom MK1 (2013 – 2018). Transit Custom MK1 Facelift (2018 Onwards). Transit MK8 Facelift (2018 Onwards). BT-50 (2nd Gen) UP/UR (2011 – 2020). May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bowers and Wilkens or Harman Karon have different speakers with different connections. Please check your original speaker connections match the picture before purchasing.
  
  

  Tags: 165mm, blam, fitting, ford, inch, kuga, speaker, upgrade

« Previous Entries