Upgrade Kit Fits

• 24Nov

  Car Double Din Stereo Upgrade Fitting Kit (Without Steering Control) for Peugeot

  double Comments Off
  
  
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-743-IGN Double din stereo upgrade fitting kit. Double Din Fascia Adapter Trim (Matt Black). Fakra to Din Antenna Adapter. 103mm High Double Din Cage Kit. CANbus Radio ISO Lead. Compatible with following vehicles. Car Make / Model. Radio fascia adapter panel to allow the fitting of an aftermarket Double DIN Car stereo upgrade. This fascia is a trim piece that covers the radio cage to give a professional finish when installing an aftermarket double DIN radio. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. CANbus Radio ISO lead. Audio cable to convert Citroen/ Peugeot cars with Quadlock connector to a European car radio with ISO connectors. Includes a CANbus 12v accessory ignition supply. Car audio metal cage kit 103mm high. This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes. Complete with fixings to attach to the new car radio body. Only suitable for vehicles without steering wheel controls. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: control, double, fitting, peugeot, steering, stereo, upgrade, without

• 11Nov

  Double Din Upgrade Fitting Kit (Composition Colour and Media) for Seat Alhambra

  double Comments Off
  
  
  
  
  Mens / Womens Shavers. V2 (Composition Colour and Media) Complete Double Din Stereo Upgrade Kit. Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection. This is to replace original Composition or Discover radios. Double Din Flush Fit Fascia Adapter With Side Fixing Brackets. Radio Replacement Steering Wheel Adapter Interface. Double Fakra Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This is for a new style (2015 onwards) Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins in the corner of the connector. DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION. PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control CAN Interface adapter cable. Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK). This interface comes with a double fakra antenna adapter, so no additional antenna adapter is required with this part. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Double moulded Fakra Aerial adapter cable for European cars that have amplified original antennas. Use with cars that have twin antenna both requiring power. Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. THIS FITTING KIT IS COMPATIBLE WITH VOLKSWAGEN ORIGINAL HEAD UNITS FITTED WITH THE NEWER QUADLOCK AND A DOUBLE FAKRA CONNECTION, PLEASE SEE PICTURES BELOW. VW Composition Media (also fits Composition Audio and Composition Colour). That some vehicles have original DAB. This is not retained with this kit and will require 21-037 Fakra to SMB adapter. This kit also does not retain original reverse cameras or USB and AUX ports. Please see the other items listed against your car and original head unit to see if these are available as they vary by model and originally fitted radio. Not suitable for original amplified systems (Dynaudio, Fender). The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: alhambra, colour, composition, double, fitting, media, seat, upgrade

• 28Sep

  Car Double Din Stereo Upgrade Fitting Kit for Seat Alhambra Altea Leon Toledo

  double Comments Off
  
  
  
  
  Mens / Womens Shavers. V2 Double Din Stereo Upgrade Fitting Kit (Steering wheel controls). Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars. This kit also fits various Skoda and Seat cars. Suitable for Skoda Superb cars with the original Columbus navigation radio. This is an alternative product to FK-699-SWC1-D. Double Din Flush Fit Fascia Adapter With Side Fixing Brackets. Radio Replacement Steering Wheel Adapter Interface. Double Fakra Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. No radio information will be shown on the original display in the car. This is an alternative product to 49-VW-01. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Double Fakra to DIN antenna adapter cable with 12v phantom power. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade. Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. THIS FITTING KIT IS COMPATIBLE WITH VOLKSWAGEN ORIGINAL HEAD UNITS FITTED WITH A DOUBLE FAKRA CONNECTION, PLEASE SEE PICTURES BELOW. That some vehicles have original DAB. This is not retained with this kit and will require 21-037 Fakra to SMB adapter. This kit also does not retain original reverse cameras or USB and AUX ports. Please see the other items listed against your car and original head unit to see if these are available as they vary by model and originally fitted radio. Not suitable for original amplified systems (Dynaudio, Fender) Please use FK-699-SWC2-D for these models. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: alhambra, altea, double, fitting, leon, seat, stereo, toledo, upgrade

• 27Jul

  Double Din Stereo Upgrade Fitting Kit for Skoda Fabia, Octavia, Roomster, Superb

  double Comments Off
  
  
  
  
  Mens / Womens Shavers. V2 Double Din Stereo Upgrade Fitting Kit (Steering wheel controls). Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars. This kit also fits various Skoda and Seat cars. Suitable for Skoda Superb cars with the original Columbus navigation radio. This is an alternative product to FK-699-SWC1-D. Double Din Flush Fit Fascia Adapter With Side Fixing Brackets. Radio Replacement Steering Wheel Adapter Interface. Double Fakra Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Mk2 facelift (Typ 1Z). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. No radio information will be shown on the original display in the car. This is an alternative product to 49-VW-01. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Double Fakra to DIN antenna adapter cable with 12v phantom power. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade. Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. THIS FITTING KIT IS COMPATIBLE WITH VOLKSWAGEN ORIGINAL HEAD UNITS FITTED WITH A DOUBLE FAKRA CONNECTION, PLEASE SEE PICTURES BELOW. That some vehicles have original DAB. This is not retained with this kit and will require 21-037 Fakra to SMB adapter. This kit also does not retain original reverse cameras or USB and AUX ports. Please see the other items listed against your car and original head unit to see if these are available as they vary by model and originally fitted radio. Not suitable for original amplified systems (Dynaudio, Fender) Please use FK-699-SWC2-D for these models. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: double, fabia, fitting, octavia, roomster, skoda, stereo, superb, upgrade

• 03Jun

  Double Din Stereo Upgrade Fitting Kit Gloss Black for Seat Ibiza 2008-2017

  double Comments Off
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-342P3 Car Stereo Fascia Fitting Kit For Seat. This fitting kit allows you to replace the original factory fitted head unit in the vehicle with a new aftermarket Double DIN version, retaining the original dashboard appearance and the steering wheel control functions. Double Din Flush Fit Fascia Adapter (Gloss Black). Steering Wheel Control Interface and Radio Adapter Cable. Fakra to Din Aerial Adapter (Phantom Power) with Bullet Connector. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia adapter panel is to fit a Double DIN aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a Gloss black finish and is a flush mount style so it replaces the radio trim supplied with the aftermarket radio. This gives a flush professional finish to the installation. The fascia is supplied with a double din fitting cage. Standard cages supplied with aftermarket radios are too big for the fascia trim. Fits Seat Ibiza Mk4 (2008 – 2017). Will not fit cars with original MIB II colour screen. Steering wheel control interface and adapter cable for Seat cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility, see the instructions for more information. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on. We also have this part available with a junior timer receptacle terminal to make it easy to connect into the electric antenna turn on position of a standard ISO connector, the 21-123. Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size.
  
  

  Tags: 2008-2017, black, double, fitting, gloss, ibiza, seat, stereo, upgrade

• 17May

  Car Double DIN Stereo Upgrade Fascia Fitting Kit for Peugeot 108

  double Comments Off
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-650 Double Din Fascia Fitting Kit. Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit in Citroen C1, Peugeot 108 and Toyota Aygo car models (Without Steering Controls). Double Din Fascia (Piano Black). Car radio ISO connection harness. Compatible with following vehicles. Car Make / Model. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car. Standard Radio ISO Lead. Radio ISO cable to connect Toyota cars to an after-market European car radio with ISO style connectors. PLEASE NOTE: This ISO lead will not retain steering wheel audio controls. This fitting kit fits Double DIN head units with a maximum depth of 80mm For vehicles with steering wheel controls please use FK-650-SWC. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: double, fascia, fitting, peugeot, stereo, upgrade

• 04Apr

  BMW X5 E53. Double DIN stereo upgrade fitting kit with SWC (DSP AMP BYPASS)

  double Comments Off
  
  
  
  DSP amplifier bypass cable (20-316). Adapter cable to bypass the original DSP amplifier in a BMW X5 car with original sat nav. This adapter cable allows the fitting of an aftermarket stereo upgrade by bypassing the original DSP amplifier in the car. The original amplifier uses a digital data audio signal and therefore cannot be used with an aftermarket radio. The cable bypasses the original amplifier allowing the new radio to play audio directly to the cars speakers. The original amplifier is located behind the rear left quarter panel in the boot. The amp bypass cable connects to the speaker connectors from the amplifier, it also connects to the quadlock connector from the original tuner module located under the boot floor next to the battery. A 5 metre extension is provided to then extend these audio and power connections to the dashboard. The cable then terminates with a quadlock connector, this allows for the fitting of an ISO radio adapter cable or a steering wheel control adapter cable to fit to the new radio. The extension also accommodates for speed pulse and reverse gear signals to be extended to the steering control interface, these are loose wires on the adapter cable that need to be hardwired at the back of the car. PLEASE NOTE: This bypass cable is for cars with the DSP amplifier only, below are images of the DSP amplifier. Some cars have a power amplifier, a different fitting kit (FK-770-NAV) is needed for these cars. 5M antenna extension lead (21-028). 5 metre male to female Fakra antenna cable extension. With water blue universal Fakra cable. Used to extend the fakra connector when fitted at the rear of a car. Antenna adapter cable (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Steering wheel control adapter cable (29-721). This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The built in interface will allow the original audio controls on the steering wheel to work with an aftermarket radio. This adapter cable is designed to be plug and play installed along with the BMW X5 amplifier bypass cable. When used with the bypass cable, it will also provide speed pulse and reverse gear signals to the new radio. Universal patch lead for steering control adapter (29-025). This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted. Fascia adapter panel (50-770-NAV). Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. This fascia is supplied with 2 extra mounting brackets, cars with original navigation radios have different mounting points to cars with standard radios, fitting instructions are supplied. We recommend this installation is done by a professional car audio technician.
  
  

  Tags: bypass, double, fitting, stereo, upgrade

• 29Mar

  Double Din Stereo Upgrade Fitting Kit WITHOUT STEERING CONTROLS for Suzuki Swift

  double Comments Off
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec Fk-914 Double Din Car Stereo Fitting Kit For Suzuki. Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in Suzuki Swift and Suzuki Swift Sport (2010 – 2017) car models (Without Steering Controls). Aerial Adapter to Male Din. Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. Car Radio ISO Connection Harness. This plug and play cable allows you to connect an aftermarket car radio with European iso connectors to the cars wiring using the original connectors in the car. This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers. FOR CARS WITH STEERING WHEEL CONTROLS PLEASE USE FK-914-SWC. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: controls, double, fitting, steering, stereo, suzuki, swift, upgrade

• 13Mar

  Double DIN Stereo Upgrade Fitting Kit (WITH STEERING CONTROLS) for Toyota Aygo

  double Comments Off
  
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-650-SWC Double Din Fascia Fitting Kit. Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo car models. This fitting kit will also retain the factory USB and AUX functions (if vehicle is equipped). Double Din Fascia (Piano Black). Steering Wheel Control Interface. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. The cable also provides a speed pulse (for GPS) reverse output (for an aftermarket reverse camera) and handbrake output signal to the new stereo. The AUX 3.5mm jack below the original radio is retained with this interface by connecting the left and right inputs (2 RCAs) found on the back of most double DIN aftermarket radios that don’t feature an AUX jack on the front panel. The USB can be retained with part 24-250. The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen, Peugeot and Toyota Aygo cars that have an original USB socket. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. This fitting kit fits Double DIN head units with a maximum depth of 80mm. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: aygo, controls, double, fitting, steering, stereo, toyota, upgrade, with

• 11Mar

  Car Double Din Fascia Stereo Upgrade Fitting Kit for Seat Ibiza 2008-2017 Mk4

  double Comments Off
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-342P Car Stereo Fascia Fitting Kit For Seat. This fitting kit allows you to replace the original factory fitted head unit in the vehicle with a new aftermarket Double DIN version, retaining the original dashboard appearance and the steering wheel control functions. Double Din Flush Fit Fascia Adapter (MATT BLACK). Steering Wheel Control Interface and Radio Adapter Cable. Fakra to Din Aerial Adapter (Phantom Power) with Bullet Connector. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia adapter panel is to fit a double din aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a matt black finish and is a flush mount style so it replaces the radio trim supplied with the aftermarket radio. This gives a flush professional finish to the installation. The fascia is supplied with a double din fitting cage. Standard cages supplied with aftermarket radios are too big for the fascia trim. Fits Seat Ibiza Mk4 (2008 – 2017). Will not fit cars with original MIB II colour screen. Steering wheel control interface and adapter cable for Seat cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility, see the instructions for more information. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on. We also have this part available with a junior timer receptacle terminal to make it easy to connect into the electric antenna turn on position of a standard ISO connector, the 21-123. Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size.
  
  

  Tags: 2008-2017, double, fascia, fitting, ibiza, seat, stereo, upgrade

« Previous Entries