Upgrade Kit Fits

• 29Sep

  Double DIN Stereo Upgrade Fitting Kit (WITH STEERING CONTROLS) for Citroen C1

  double Comments Off
  
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-650-SWC Double Din Fascia Fitting Kit. Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo car models. This fitting kit will also retain the factory USB and AUX functions (if vehicle is equipped). Double Din Fascia (Piano Black). Steering Wheel Control Interface. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. The cable also provides a speed pulse (for GPS) reverse output (for an aftermarket reverse camera) and handbrake output signal to the new stereo. The AUX 3.5mm jack below the original radio is retained with this interface by connecting the left and right inputs (2 RCAs) found on the back of most double DIN aftermarket radios that don’t feature an AUX jack on the front panel. The USB can be retained with part 24-250. The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen, Peugeot and Toyota Aygo cars that have an original USB socket. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. This fitting kit fits Double DIN head units with a maximum depth of 80mm. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: citroen, controls, double, fitting, steering, stereo, upgrade, with

• 23Sep

  Car Double Din Stereo Upgrade Fitting Kit for VW Caddy Eos Golf Jetta Passat

  double Comments Off
  
  
  
  
  Mens / Womens Shavers. V2 Double Din Stereo Upgrade Fitting Kit (RCD300 RCD500). Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars. This kit fits cars with original RCD300, RCD500 or RNS-MFD-2 radio. This is an alternative product to FK-699-SWC1-T. Double Din Flush Fit Fascia Adapter With Side Fixing Brackets. Radio Replacement Steering Wheel Adapter Interface. Twin Fakra Antenna Adapter (12v Phantom power). Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. No radio information will be shown on the original display in the car. This is an alternative product to 49-VW-01. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Twin fakra to DIN antenna adapter cable with 12v phantom power. This antenna adapter cable adapts from the original twin fakra connectors in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade. Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. THIS FITTING KIT IS COMPATIBLE WITH VOLKSWAGEN CARS FITTED WITH ORIGINAL RCD300, RCD500 OR RNS-MFD-2 HEAD UNITS THAT HAVE A TWIN FAKRA ANTENNA CONNECTION, PLEASE SEE PICTURES BELOW. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: caddy, double, fitting, golf, jetta, passat, stereo, upgrade

• 10Aug

  Car Double Din Fascia Stereo Upgrade Fitting Kit for Skoda Octavia, Yeti

  double Comments Off
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-713-SWC1-S Double DIN Fascia Fitting Kit For Skoda. This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original radio. Double DIN Facia Adapter Panel. Radio Replacement Steering Wheel Adapter Interface. Fakra to DIN Aerial Adapter (12V Phantom) With Bullet Connection. Universal Patch Lead (Included). Compatible with following vehicles. CAR MAKE / MODEL. Mk2 facelift (Typ 1Z). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. If fitting a Double DIN unit this fascia takes a 113mm high cage, this is the size of cages supplied with all major brand head unit manufacturers. If a cage is needed, we sell a matching cage with part number 51-013. This fascia takes a 113mm high cage, this is the size of cages supplied with all major brand head unit manufacturers. Steering Wheel Control, PDC and Climate Interface. The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake outputs signals to the new stereo. Fakra to DIN Antenna Adapter Cable (12v Phantom) With Bullet Connection. Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade. Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. Please note that some vehicles have original DAB. This is not retained with this kit and will require 21-037. Fakra to SMB adapter. This kit also does not retain original reverse cameras or USB and AUX ports. Please see the other items listed against your car and original head unit to see if these are available as they vary by model and originally fitted radio. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size.
  
  

  Tags: double, fascia, fitting, octavia, skoda, stereo, upgrade, yeti

• 24Apr

  Car Double Din Stereo Upgrade Fitting Kit Matt Black for Seat Ibiza Mk4 (6J)

  double Comments Off
  
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-342P-IB13 Double Din Stereo Upgrade Fitting Kit Without Heated Seats For Seat. This fitting kit allows you to replace the original factory fitted head unit in the vehicle with a new aftermarket Double DIN version, retaining the original dashboard appearance and the steering wheel control functions. Double Din Flush Fit Fascia Adapter (MATT BLACK). Steering Wheel Control Interface. Fakra to Din Aerial Adapter (Phantom Power) with Bullet Connector. Replacement Button Panel and Harness. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia adapter panel is to fit a double din aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a matt black finish and is a flush mount style so it replaces the radio trim supplied with the aftermarket radio. This gives a flush professional finish to the installation. The fascia is supplied with a double din fitting cage. Standard cages supplied with aftermarket radios are too big for the fascia trim. Fits Seat Ibiza Mk4 (2008 – 2017). Will not fit cars with original MIB II colour screen. On cars built between 2014 and 2017 a new button panel and extension loom is required to move the hazard switch and other controls from the original radio to the area next to the gear stick. The exact parts required will depend on the original specification of the car. Steering Wheel Control Interface and Radio Adapter Cable. Steering wheel control interface and adapter cable for Seat cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility, see the instructions for more information. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on. We also have this part available with a junior timer receptacle terminal to make it easy to connect into the electric antenna turn on position of a standard ISO connector, the 21-123. Replacement button assembly panel for Seat Ibiza cars. When fitting a new double din head unit into a 2014 onward Seat Ibiza, the buttons from the original radio panel need to be relocated. Earlier models had more buttons on the panel down by the gear stick, a button panel from an earlier model car is required. See the image below for examples of the earlier and newer models with the different positions of hazard, ESP and airbag buttons. The button panel from the earlier car pictured to the left will be needed for the newer car pictured to the right. This is used to relocate the original hazard and passenger airbag buttons when fitting an aftermarket head unit. Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Brand: InCarTec
  • Manufacturer Warranty: 2 Years
  • Manufacturer Part Number: FK-342P-IB13
  • Material: Plastic
  • Country/Region of Manufacture: China
  • Colour: Matt Black
  • EAN: 7427282740258

  
  
  

  Tags: black, double, fitting, ibiza, matt, seat, stereo, upgrade

• 29Oct

  Car Double Din Fascia Stereo Upgrade Fitting Kit for Mercedes Benz Vito 2015

  double Comments Off
  
  
  
  Mens / Womens Shavers. InCarTec FK-711-4 Double Din Stereo Upgrade Fitting Kit for mercedes. Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Mercedes Vito (2015 Onwards) vehicles. Fakra to DIN Antenna Adapter Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Suitable for models with standard NTG1 original radios and non amplified audio systems. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Dimensions: 184mm x 114mm The Fascia adapter panel takes a 113mm high cage, this is the size of cages supplied with all major brand head unit manufactures. If a cage is needed, we sell a matching cage with part number 51-013. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals. For Mercedes cars with the newer steering control protocol only. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. NOT COMPATIBLE WITH CHINESE 2WIRE SWC HEAD-UNITS use 49-000 for these. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Country/Region of Manufacture: China
  • Material: Plastic
  • Manufacturer Part Number: FK-711-4
  • Brand: InCarTec
  • Manufacturer Warranty: 2 Years
  • EAN: 7427282690300

  
  
  

  Tags: benz, double, fascia, fitting, mercedes, stereo, upgrade, vito

• 23Aug

  Double Din Car Stereo Upgrade Fitting Kit Gloss Black for Hyundai i40 2015-2020

  double Comments Off
  
  
  
  Mens / Womens Shavers. InCarTec FK-901/16G Double Din Car Stereo Upgrade Fitting Kit Gloss Black for Hyundai. Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Hyundai (2016 Onwards) car models with Basic audio systems. Double Din Fascia (Gloss Black). Fakra to DIN Antenna Adapter Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Only for cars without OEM navigation. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This kit has side fixing brackets which attach to the side of the new Double DIN radio chassis so no cage is needed. Fascia hole size: 172mm x 98mm. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering control interface to retain the use of the audio steering control buttons on various Hyundai and Kia cars from 2016 onwards. Speed pulse, Parking brake and reverse output signal. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Hyundai /Kia radio antenna cable adapter for converting the original car radio plug to use with aftermarket head units. This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. Only suitable for cars WITHOUT original OEM touchscreen navigation. Please see a picture of an aftermarket installation using this fitting kit below. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Colour: Gloss Black
  • Country/Region of Manufacture: China
  • Material: Plastic
  • Manufacturer Part Number: FK-901/16G
  • Brand: InCarTec
  • Manufacturer Warranty: 2 Years
  • EAN: 7427282690331

  
  
  

  Tags: 2015-2020, black, double, fitting, gloss, hyundai, stereo, upgrade

• 08Aug

  Car Double Din Fascia Stereo Upgrade Fitting Kit For BMW 3 Series E46 1999-2006

  double Comments Off
  
  
  
  Mens / Womens Shavers. FK-951 Double Din Fascia Panel For BMW. Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in BMW 3-Series (E46) cars fitted with Basic radio. Includes cutting guides and new panels to allow easier modification of the heater box which is needed to fit a full sized Double DIN radio into the dashboard. Double Din Fascia Kit. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. E46, Round Pin Connection Only. Modification is required to fit a head unit with a Double DIN chassis. We recommend this is done by a skilled car audio technician! Modification to the heater box can be avoided by fitting a radio with a compact/ single DIN rear chassis at the top the radio, such as the SONY XAV-AX3005DB shown below. Below is a picture of an aftermarket head unit upgrade using this facia kit with the original RHD centre console panel modified to fit the climate control module where the upper storage tray was. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for various BMW cars to fit an aftermarket radio upgrade. The cable adapts from the 17 Round Pin connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. You have a choice from the following patch leads. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct fascia for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of the fascia listed looks like your standard stereo. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Country/Region of Manufacture: China
  • Material: Plastic
  • Manufacturer Part Number: FK-951
  • Brand: InCarTec
  • Manufacturer Warranty: 2 Years
  • EAN: 7427282696586

  
  
  

  Tags: 1999-2006, double, fascia, fitting, series, stereo, upgrade

• 25Jun

  Double Din Car Stereo Upgrade Fitting Kit Matt Grey for Isuzu D-Max MU-X

  double Comments Off
  
  
  
  Mens / Womens Shavers. InCarTec FK-799/1 Double Din Car Stereo Upgrade Fitting Kit for Isuzu. Double Din Fascia Adapter (MATT GREY). Steering Wheel Control Interface. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This fascia includes 3 different trim solutions depending on the radio head unit. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. Measurements for the inner side of the trims are as follows. Trim 1 – 172mm wide x 97mm high. Trim 2 – 173mm wide x 98mm high. Trim 3 – 178mm wide x 100mm high. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. You have a choice from the following patch leads. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Colour: Matt Grey
  • Country/Region of Manufacture: China
  • Material: Plastic
  • Manufacturer Part Number: FK-799/1/i
  • Brand: InCarTec
  • Manufacturer Warranty: 2 Years
  • EAN: 7427282713955

  
  
  

  Tags: d-max, double, fitting, grey, isuzu, matt, mu-x, stereo, upgrade

• 07Jun

  Car Double Din Stereo Complete Upgrade Fitting Kit Black for Ford FK-876-CAN

  double Comments Off
  
  
  
  Mens / Womens Shavers. InCarTec FK-876-CAN Fitting kit For Ford. Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original Black oval-shaped radio and CANbus service. This kit includes CAN igntion and illuminations outputs on the steering wheel control interface. Double Din Fascia and Cage Fitting Kit. Steering Wheel Control Interface (WITH CAN). Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This fitting kit is suitable for Ford vehicles with CAN service, for non-CAN vehicles please use FK-876. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable with CAN service to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. NOTE: Some cars do not have an ignition power supply in the original quadlock, these cars will require an ignition supply to be hardwired. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and source buttons. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Patch lead to match the steering control interface to the new head unit. Some branded and other unbranded CHINESE Head Units vary in size and will not fit. Please check the dimensions of your Head Unit and compare to our flush fit dimensions (172mm x 98mm). For further support, please read our FASCIA FITTING GUIDE. You have a choice from the following patch leads. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “dynamicsounds00″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Colour: Black
  • Country/Region of Manufacture: China
  • Material: Plastic
  • Manufacturer Part Number: FK-876-CAN
  • Brand: InCarTec
  • Manufacturer Warranty: 2 Years
  • EAN: 7427282713986

  
  
  

  Tags: black, complete, double, fitting, fk-876-can, ford, stereo, upgrade

• 26Mar

  VW Double Din Stereo Screen Reverse Cam Pioneer Car Play Fitting Kit Upgrade

  double Comments Off
  
  
  
  VW Double Din Stereo Upgrade Kit 2DIN Screen Reverse Camera Pioneer Bundle. Please Check Below for compatible vehicles. PIONEER SPH-DA120 (2 Din Apple Car Play Stereo). CONNECTS2 CTKVW01 (Fitting Kit). PIONEER ND-BC8 (Reversing Camera). Pioneer SPH-DA120 CarPlay AppRadio Touch Screen GPS Bluetooth iPhone Android. The SPH-DA120 lets you enjoy all the benefits of smartphone connectivity in your car. Run smartphone apps, listen to your favourite music, watch videos or photos, and charge your battery on the go. The SPH-DA120 also supports AppRadio Mode. CarPlay, MirrorLink and other connectivity solutions like Bluetooth wireless streaming. With the all new SPH-DA120 you are always connected. This units brings together the use of cloud and device content from compatible iOS devices (iPhone® 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s and iPhone 4), Android smartphones, and MirrorLink enabled smartphones, as well as feature enhanced smartphone control, voice control for Siri® Eyes Free and Google® Voice Recognition, Bluetooth® hands-free calling and audio streaming, and a new graphical user interface. The new SPH-DA120embodies our idea of the connected car, providing the majority of smartphone owners the ability to utilize their devices in the car for calling, streaming music, and even controlling supported apps to enhance their driving experience, said Philippe Weyers, marketing communication manager at Pioneer Europe. With CarPlay, consumers with iPhone 5 or later, including iPhone 6 and iPhone 6 Plus and the latest version of iOS can use Siri voice control to make and receive calls, compose and respond to text messages, use Apple Maps for navigation and listen to their music libraries and podcasts. Users of iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5 and iPhone devices can take advantage of Siri Eyes Free functionality with a touch of the SPH-DA120 touchscreen. When activated, Siri provides voice prompts through the vehicles speakers, and the users questions and commands are received and transmitted using the external microphone provided with the unit. To maximize the connectivity options available in todays most popular smartphones, the SPH-DA120 offers both Bluetooth hands-free calling. And Bluetooth audio streaming and wireless control of compatible devices. It includes Advanced Audio Distribution Profile (A2DP) for wireless audio streaming and Audio Video Remote Control Profile (AVRCP) version 1.4 for wireless control of devices and related metadata (if available) to be viewed directly on the Pioneer touchscreen display. Enhanced Touchscreen User Interface. Designed with the smartphone user in mind, the SPH-DA120 touchscreen user interface (UI) provides easy access to the most commonly used features such as apps, music and calling. MirrorLink technology enables consumers to connect compatible smartphones to the SPH-DA120 (or other compatible in-dash receiver) via a USB cable to access certain music and map applications for a more convenient and safer in-car experience. Similar to AppRadio Mode, MirrorLink is integrated into the SPH-DA120 and offers a vehicle-specific interface and connectivity with MirrorLink certified devices from smartphone manufacturers such as Samsung, Nokia and others. The SPH-DA120 has a simple, improved user interface that makes it more intuitive and easy-to-use like your smartphone. Thanks to its large, 6.2-inch capacitive touch screen you will also enjoy smoother and safer operation on the go. Apps in your car. Hook up your iPhone 4/4s and MirrorLink devices via USB, or use the HDMI/MHL connection for your Android smartphone and control, view, and listen to music from compatible apps directly from your car dashboard. If you prefer to listen to music wirelessly, you simply connect your smartphone via Bluetooth. Stream your favourite tunes without hassle and take control of compatible devices. The improved Bluetooth module includes wide band speech for enhanced voice recognition. Use Siri Eyes Free or Google Voice to browse your contacts and call hands-free without taking your eyes off the road. Built-in MirrorLink lets you mirror your smartphones content to your car display. Easily browse through your music library or engage an app for navigation. Whatever you prefer, a safer in-car experience is guaranteed. Play your favourite audio and video content effortlessly via one of the USB connection ports. Parking becomes a piece of cake thanks to the rear camera input. Hook up a back-up camera (optional) to get a full view of the road and obstacles behind you. You will never miss a thing in reverse! Personalise the SPH-DA120 by changing its background to fit your preferences. 6.2 WVGA Multi-Touch Capacitive Screen. 2 x Rear USB. 3 RCA Pre-outs (Front, Rear and Subwoofer). WMA, MP3, ACC, WAV, and FLAC audio files. 264, DivX, DivX HomeTheatre 3.1, MKV, and FLV video files. Other music devices via the rear Aux-In. External Bluetooth Microphone (included). (External GPS Antenna included). 4 x 50W MOSFET. IPhone 4: (Optional cable CD-IU201N required). IPhone 5: USB to Lightning CA-IU. 52C & Apple Digital AV adapter required. IPhone 5S/5C running iOS7. IPhone 5 running iOS6 / iOS7. IPhone 6/6+ running iOS8. IPhone 4/4S running iOS5 / iOS6 / iOS7. IPod touch 4th gen. Running iOS5 / iOS6. Access to Photos, Calendar, Contacts, and Podcasts. AppRadio Mode For Android. Selected Android phones that are HDMI or MHL compatible. Connects2 CTKVW01 Double Din Stereo Fitting Kit For VW Golf. Double Din Fascia Adaptor (Black). Steering wheel Control Adaptor. 2LEAD (Universal Patch lead). This kit allows fitment in the following vehicle. Volkswagen Amarok : 2010 Onwards. Volkswagen Beetle : 2011 Onwards. Volkswagen Caddy : 2004 Onwards. Volkswagen EOS : 2006 Onwards. Volkswagen Golf : 2004 Onwards. Volkswagen Jetta : 2005 Onwards. Volkswagen Passat : 2005 Onwards. Volkswagen Polo : 2009 Onwards. Volkswagen Scirocco : 2008 Onwards. Volkswagen Sharan : 2010 Onwards. Volkswagen Tiguan : 2007 Onwards. Volkswagen Touran : 2003 Onwards. Volkswagen Transporter : 2009 Onwards. Pioneer ND-BC8 Reversing Camera. This high-quality, NTSC universal camera displays a mirror-image on your in-car screen, making it ideal for depicting what you would normally not see in a rear-view mirror. The high-sensitivity lens has a sight line of 135° and an embedded chip which automatically adjusts brightness in light or dark driving conditions. The 320,000 pixels CMOS sensor is accurate and eliminates smear (white streaks when direct sunlight enters the camera). The ND-BC8 can be hooked up to any of our systems with a rear camera input. Its compact size allows for installation in virtually any location. Dimensions (W x H x D). Camera: 23.8 x 23.8 x 25.5 mm. Power unit: 54 x 24 x 24 mm. 132 g / 186 g including cables. Power unit: 110 g. Pixels 1/4 CMOS sensor. Cable: 10 m (3 m + 7 m). Power Supply: 14.4V DC 10.8.. Ireland, IM (Isle of Man), JE (Jersey), GY (Guernsey), PO (Isle of Wight), ZE (Shetlands). All our goods are original brand new products, Sourced direct from our UK suppliers. Multiple items may be sent in separate packages and as a result may not all be delivered on the same day. This is important and ensures you are happy with our terms. We want your shopping experience to be a happy one and wish to avoid any complications later on. This may sound obvious, but unfortunately this does happen occasionally. Feedback: We do hope you leave feedback for us, but for those who prefer to stay anonymous, our automated system will only leave feedback for you once you have left it for us. We will do all we can to work with you to track a lost item and will stay in contact with you for the duration of the search until an outcome is reached. Faulty Items: All products are individually inspected before despatch to ensure items are sent out in perfect condition. This does not affect your statutory rights. Please note that items that been used, trialled or tested will not be accepted for return/credit. The item “VW Double Din Stereo Screen Reverse Cam Pioneer Car Play Fitting Kit Upgrade” is in sale since Tuesday, January 23, 2018. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Car Stereos & Head Units”. The seller is “eseller-direct00″ and is located in St Helier. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Norway, Indonesia, Mexico, Switzerland, Chile, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates.

  • Manufacturer Part Number: SPH-DA120
  • Brand: Pioneer

  
  
  

  Tags: double, fitting, pioneer, play, reverse, screen, stereo, upgrade

   Next Entries »