Upgrade Kit Fits

• 25Feb

  Hulk Brake Upgrade Kit Rear Fits Landcruiser Vdj Series Cduk-02

  hulk Comments Off
  
  
  
  
  
  HULK BRAKE UPGRADE KIT REAR FITS LANDCRUISER VDJ SERIES CDUK-02. Suits Toyota LandCruiser VDJ Series. These kits offer affordable upgrades over the standard braking system. Disc kits consists of a pair of 312mm slotted rotors, high quality Akebono or Kevlar ceramic brake pads, and braided brake hoses. These delays are beyond our control and we ask that you bear with us over this challenging time. Thank you for your support and patience. All orders are processed within 24 hours. We endeavour to have all orders dispatched same day. All products supplied are guaranteed against faulty manufacture for 6 months. This does not cover general wear and tear, neglect or misuse. We reserve the right to supply a replacement part or repair, rather than credit. Correct checking of belt tensions and alignment must also be observed. Once operational the system needs a full check by a qualified technician for evidence as to why the original unit failed. The majority of instances of clutch failure happen because there is a major fault with the air conditioning system operation. After installation of a new clutch, the air conditioning system must be carefully checked by a qualified Technician that the root cause is rectified, as claims for replacement will be refused due to system faults. Special order items are non-returnable, you will be notified if an item is special order at time of placing order. All prices quoted are subject to carriage charges and GST at current rate. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts”. The seller is “autofit.parts” and is located in this country: AU. This item can be shipped worldwide.

  • Manufacturer Part Number: CDUK-02
  • Brand: HULK
  • Type: VENTED AND SLOTTED

  
  
  

  Tags: brake, cduk-02, fits, hulk, landcruiser, rear, series, upgrade

• 24Feb

  Hulk Brake Upgrade Kit Front Fits Landcruiser Vdj Series Cduk-01

  hulk Comments Off
  
  
  
  
  
  HULK BRAKE UPGRADE KIT FRONT FITS LANDCRUISER VDJ SERIES CDUK-01. Suits Toyota LandCruiser VDJ Series. These kits offer affordable upgrades over the standard braking system. Disc kits consists of a pair of 322mm slotted rotors, high quality Akebono or Kevlar ceramic brake pads, and braided brake hoses. These delays are beyond our control and we ask that you bear with us over this challenging time. Thank you for your support and patience. All orders are processed within 24 hours. We endeavour to have all orders dispatched same day. All products supplied are guaranteed against faulty manufacture for 6 months. This does not cover general wear and tear, neglect or misuse. We reserve the right to supply a replacement part or repair, rather than credit. Correct checking of belt tensions and alignment must also be observed. Once operational the system needs a full check by a qualified technician for evidence as to why the original unit failed. The majority of instances of clutch failure happen because there is a major fault with the air conditioning system operation. After installation of a new clutch, the air conditioning system must be carefully checked by a qualified Technician that the root cause is rectified, as claims for replacement will be refused due to system faults. Special order items are non-returnable, you will be notified if an item is special order at time of placing order. All prices quoted are subject to carriage charges and GST at current rate. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts”. The seller is “autofit.parts” and is located in this country: AU. This item can be shipped worldwide.

  • Manufacturer Part Number: CDUK-01
  • Brand: HULK
  • Type: VENTED AND SLOTTED

  
  
  

  Tags: brake, cduk-01, fits, front, hulk, landcruiser, series, upgrade

• 13Feb

  UNIVERSIAL FUEL PUMP RELAY UPGRADE KIT 12awg Honda Acura K20 K24 B18 D B Series

  universial Comments Off
  
  
  
  
  
  
  
  
  
  
  UNIVERSIAL FUEL PUMP RELAY UPGRADE KIT 12awg Honda Acura K20 K24 B18 D B Series. This product data sheet is originally written in English. Clean Injection Pro Series Honda/Acura OBD0, OBD1, and OBD2 Fuel Pump Relay Upgrade Harness Kit! Looking to upgrade your wire to your fuel pump and modify your OEM hanger? Clean Injection Pro Series Fuel Pump Harness will support upgraded fuel pumps such as the popular walbro 255lph, 450lph, 525lph, AEM 320lph or any fuel pump that draws a higher amperage than the factory pump. Clean Injection Pro Series Harness eliminates the possibility of melting the OEM wires or causing potential damage to your main relay. This kit will bypass the regulated OEM fuel pump wires and supply nearly 14.5 volts directly to your fuel pump. This upgrade will also increase fuel flow by up to 15% without doing any other modifications. This kit is perfect for those running a Fuel cell and need a bulkhead wiring harness kit to supply power to the pump. Clean Injection Pro harness is built using Aircraft grade TXL wiring which is resistant to gasoline, oil, grease, acid, and solvents. TXL wiring will also resist elevated temperatures of up to. Powered using 12 AWG wires rated to 20 amps of current draw. We use a Mini Power Distribution Module featuring quick lock latches which keeps the cover securely in place while still allowing for speed opening and closing. The IP67 sealed unit will stand up to road splash, oil, gasoline, and salt spray. The mini Power Distribution module houses a Picker 35 amp 280 micro relay and 30 amp fuse. Very easy to install and completely plug and play. Clean Injection Pro Series harness is powered using the power wire located in the under hood fuse box. Simply unscrew the power wire coming from the alternator and attached the Pro Series Harness Power wire with Ring terminal. The mini Power Distribution module can be mounted under the glove box and then route the wire harness back to your fuel pump hanger. The harness Trigger connector plugs right into the OBD1 to OBD2 OEM Honda/Acura 2 pin fuel pump harness connector located on top of the factory fuel pump hanger. That 2 pin plug is now used to Trigger the Pro Series Relay instead of powering the factory fuel pump. No cutting or modifications needed for OBD1 to OBD2 models. This kit includes expansion harness that allows you to adapt the pro series harness to OBD0 chassis such as the EF models or CRX. The expansion harness can also be used for custom Trigger applications were the user provides their on Trigger to the pro series harness. Clean Injection Pro Series harness includes bulkhead wire fitting for those that are modifying the stock fuel pump hanger or suppling power to a fuel pump in a custom fuel cell. The bulkhead fitting features o-ring which seals the bulkhead from fuel or fuel vapors. Honda Civic/Acura Integra OBD0, OBD1 and OBD2 2 and 4 door. This kit includes expansion harness that allows you to adapt th. B16 d16 b20 bulkhead fitting obd1 obd2 civic si. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “clean-injection” and is located in this country: US. This item can be shipped worldwide.

  • Brand: Clean Injection
  • Type: Electrical
  • Manufacturer Part Number: b16 d16 b20 bulkhead fitting obd1 obd2 civic si
  • Country/Region of Manufacture: United States
  • Modified Item: No

  
  
  

  Tags: 12awg, acura, fuel, honda, pump, relay, series, universial, upgrade

• 09Feb

  Hulk Brake Upgrade Kit Rear Fits Toyota Landcruiser 200 Series Cduk-14

  hulk Comments Off
  
  
  
  
  
  HULK BRAKE UPGRADE KIT REAR FITS TOYOTA LANDCRUISER 200 SERIES CDUK-14. Suits Toyota LandCruiser 200 Series. These kits offer affordable upgrades over the standard braking system. Disc kits consists of a pair of slotted 345mm rotors, high quality Akebono or Kevlar ceramic brake pads, and braided brake hoses. These delays are beyond our control and we ask that you bear with us over this challenging time. Thank you for your support and patience. All orders are processed within 24 hours. We endeavour to have all orders dispatched same day. All products supplied are guaranteed against faulty manufacture for 6 months. This does not cover general wear and tear, neglect or misuse. We reserve the right to supply a replacement part or repair, rather than credit. Correct checking of belt tensions and alignment must also be observed. Once operational the system needs a full check by a qualified technician for evidence as to why the original unit failed. The majority of instances of clutch failure happen because there is a major fault with the air conditioning system operation. After installation of a new clutch, the air conditioning system must be carefully checked by a qualified Technician that the root cause is rectified, as claims for replacement will be refused due to system faults. Special order items are non-returnable, you will be notified if an item is special order at time of placing order. All prices quoted are subject to carriage charges and GST at current rate. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts”. The seller is “autofit.parts” and is located in this country: AU. This item can be shipped worldwide.

  • Manufacturer Part Number: CDUK-14
  • Brand: HULK
  • Type: VENTED AND SLOTTED

  
  
  

  Tags: brake, cduk-14, fits, hulk, landcruiser, rear, series, toyota, upgrade

• 06Feb

  Hulk Brake Upgrade Kit Front Fits Toyota Landcruiser 200 Series Cduk-13

  hulk Comments Off
  
  
  
  
  
  HULK BRAKE UPGRADE KIT FRONT FITS TOYOTA LANDCRUISER 200 SERIES CDUK-13. Suits Toyota LandCruiser 200 Series. These kits offer affordable upgrades over the standard braking system. Disc kits consists of a pair of slotted 340mm rotors, high quality Akebono or Kevlar ceramic brake pads, and braided brake hoses. These delays are beyond our control and we ask that you bear with us over this challenging time. Thank you for your support and patience. All orders are processed within 24 hours. We endeavour to have all orders dispatched same day. All products supplied are guaranteed against faulty manufacture for 6 months. This does not cover general wear and tear, neglect or misuse. We reserve the right to supply a replacement part or repair, rather than credit. Correct checking of belt tensions and alignment must also be observed. Once operational the system needs a full check by a qualified technician for evidence as to why the original unit failed. The majority of instances of clutch failure happen because there is a major fault with the air conditioning system operation. After installation of a new clutch, the air conditioning system must be carefully checked by a qualified Technician that the root cause is rectified, as claims for replacement will be refused due to system faults. Special order items are non-returnable, you will be notified if an item is special order at time of placing order. All prices quoted are subject to carriage charges and GST at current rate. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts”. The seller is “autofit.parts” and is located in this country: AU. This item can be shipped worldwide.

  • Manufacturer Part Number: CDUK-13
  • Brand: HULK
  • Type: VENTED AND SLOTTED

  
  
  

  Tags: brake, cduk-13, fits, front, hulk, landcruiser, series, toyota, upgrade

• 24Jan

  To Fit BMW 3 Series E46 Rockford Fosgate 17cm Front Door Speaker Upgrade Kit

  series Comments Off
  
  
  
  BMW 3 Series E46 98-05 Rockford Fosgate 17cm Front Door Speaker Upgrade Kit. Rockford Prime R165X3 + CT25BM06. Prime 6.50 3-Way Full-Range Speaker. The R165X3 is a 6.50 3-way full-range speaker rated at 45 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware. Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome pole mounted Piezo tweeter and midrange Integrated tweeter crossover Grilles and mounting hardware included. Configuration: 3-Way Full-Range Midrange Diameter (in): 6.5″ Midrange Depth (in): 2.15″ (54.5 mm) Tweeter Diameter (in): 0.5 (12 mm) Tweeter Depth (in). 90 Watts MAX Crossover: Tweeter High-Pass (HP): 6dB Sensitivity. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Speakers”. The seller is “dvbaudio” and is located in this country: GB. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Ukraine, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam.

  • Brand: Rockford Fosgate
  • Manufacturer Part Number: R165x3-CT25BM06
  • Impedance: 4 Ω
  • Type: Coaxial

  
  
  

  Tags: 17cm, door, fosgate, front, rockford, series, speaker, upgrade

• 15Jan

  Matris SDK Series Upgrade Steering Damper Kit To Fit Suzuki GSXR1000 / R L7 17

  matris Comments Off
  
  
  
  
  
  This listing is for a Matris SDK series Damper complete with fitting kit to fit the bike in the title of the listing. This damper is designed to fit as a’Stock Mount. Their speed sensitivity design reacts to sudden movements by automatically increasing their damping without restricting movement at slow speeds. Speed Sensitive hydraulic operation. 13 position adjustable and fully re-buildable. High tensile alloy steel piston rod with chrome coating. Twin tube design with titanium external cylinder. Pressurised with Nitrogen gas for greater stability at higher temperatures. Comes ready to fit with all required parts. Performance upgrade from the OE damper. The image bellow shows the style of mount for this product, please note the damper you receive may differ from this image but will be correct for the bike in the title of the listing. Matris have been manufacturing some of the best speed sensitive dampers in the world since 1990. There are other brand names that are better know but in our opinion none that produce a better product. Extensively used in racing all around the world Matris dampers have been proven to be a fantastic high performance product. Please note the images used in this listing are for illustration purposes only, the damper you will receive may differ from those shown, but will be the correct item for the bike in the title of this listing. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Suspension & Handling\Steering Dampers”. The seller is “performoto” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Brand: Matris
  • MPN: Damper162
  • Classic Motorcycle Part: No
  • Colour: Silver
  • Country/Region of Manufacture: Italy
  • Custom Bundle: No
  • eBay payment policy ID: 303832
  • eBay returns policy ID: 303936
  • eBay shipping policy ID: 303948
  • Intended Use: Performance Part
  • Machine Type: Street Motorcycle
  • Manufacturer Part Number: SD.S121K
  • Modified Item: No

  
  
  

  Tags: damper, gsxr1000, matris, series, steering, suzuki, upgrade

• 11Jan

  Go Better Studio Studio Series 86 Wreck Gar Upgrade Emgo S Live Transformers Reviews N Stuff

  better Comments Off
  

  Tags: better, emgo, live, reviews, series, studio, stuff, transformers, upgrade, wreck

• 10Dec

  BMW 2002 Series Wire Harness Upgrade Kit fits painless terminal complete fuse

  series Comments Off
  
  
  
  
  
  
  
  Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. BMW 2002 Series Wire Harness Upgrade Kit fits painless terminal complete fuse. BMW 2002 Series Wire Harness Upgrade Kit fits painless terminal complete fuse Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Engine Harness –> Yes Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “BMW 2002 Series Wire Harness Upgrade Kit fits painless terminal complete fuse” is in sale since Friday, August 27, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Other Starters, Alternators, ECUs & Wiring”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.

  • MPN: ZTP7347A
  • Manufacturer Part Number: ZTP7347A
  • Brand: TOP END WIRING
  • Feature: High Quality Wire
  • Size: Ultra Small Design
  • Fuses: 15
  • Circuits: 24
  • Prewired Terminals: 118
  • Accessory Kit: Yes
  • Dimmer Switch: No
  • Headlight Switch: No
  • Ignition Switch: No
  • Turn Signal & Flasher Harness: Yes
  • Engine Harness: No
  • Prewired Harness: Yes
  • Labeled Wire: Yes
  • Color Coded: Yes
  • Fuse Cover: Yes
  • Built in Relay: Yes
  • Extra Wire: Yes
  • Plug n Play Technology: Included
  • Fuse Box Dimensions: 7 x 2 x 2
  • Instructions: Detailed instructions
  • Designed Location: USA
  • Manufacturer Warranty: Limited Lifetime Warranty
  • Support: Toll Free Tech Support

  
  
  

  Tags: complete, fits, fuse, harness, painless, series, terminal, upgrade, wire

• 08Dec

  1979 1983 BMW 3 Series E21 Wire Harness Upgrade Kit fits painless fuse block

  series Comments Off
  
  
  
  
  
  
  
  Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1979 – 1983 BMW 3 Series E21 Wire Harness Upgrade Kit fits painless fuse block. 1979 – 1983 BMW 3 Series E21 Wire Harness Upgrade Kit fits painless fuse block Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal & Flasher Harness –> Yes Dash Harness –> YesEngine Harness –> No Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1979 1983 BMW 3 Series E21 Wire Harness Upgrade Kit fits painless fuse block” is in sale since Friday, August 27, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Other Starters, Alternators, ECUs & Wiring”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.

  • MPN: ZTP-1709246
  • Manufacturer Part Number: ZTP-1709246
  • Brand: TOP END WIRING
  • Vintage Car Part: Yes

  
  
  

  Tags: block, fits, fuse, harness, painless, series, upgrade, wire

« Previous Entries   Next Entries »