• Category:

    • upgrade Comments Off
      K03_K04_Upgrade_Hybrid_Turbocharger_Repair_Kit_fits_Borg_Warner_TRIPLE_OIL_FEED_01_dg K03 K04 Upgrade Hybrid Turbocharger Repair Kit fits Borg Warner TRIPLE OIL FEED

      K03 K04 Upgrade Hybrid Turbocharger Repair Kit fits Borg Warner TRIPLE OIL FEED
      Aftermarket MAJOR Turbocharger Rebuild Kit for the KKK K03 and K04 units. 1x ENLARGED UPGRADED TRIPLE FEED THRUST BEARING (360 DEGREES LARGE PAD THRUST) Rated to 28psi. 2x JOURNAL BEARINGS (SINGLE FEED/TWIN FEED). 1x HIGH TEMPERATURE FRONT OIL SEAL PISTON RING. 1x HIGH TEMPERATURE REAR OIL SEAL PISTON RING. 1x ENLARGED STAINLESS STEEL THRUST COLLAR. 1x ENLARGED STAINLESS STEEL THRUST WASHER. 1x SHAFT NUT (LEFT HAND). 1x BEARING HOUSING O RING. 1x COMPRESSOR O RING. 1x ANTI ROTATION PLATE. 1x ANTI ROTATION LOCK CIRCLIP. 1x JOURNAL BEARING CIRCLIP. UPON REQUEST, WE CAN ALSO SUPPLY A TECHNICAL DIAGRAM. This kit will fit more or less every K03 and K04 unit and is one of the most complete kits available. As PROFESSIONAL turbocharger reconditioners, we cannot afford to use poor quality components in our rebuilds so ensure we only stock good quality parts. Our suppliers are manufacturers to OE companies and make components to the specifications we request and we have a strict QC process in place to ensure quality does not slip. All parts are in stock in our UK workshop ready for same day dispatch (if ordered before 3pm). You are purchasing this product from Turbo Rebuild Ltd. Turbo Rebuild is a UK family run business based in Lancashire. We are professional Turbocharger Reconditioners and work from our fully equipped, purpose built workshop which houses all required machinery for the testing, repair and production of Turbochargers and Turbo parts. We have been trading in the Turbocharger market since 1998 and are fully VAT registered. We pride ourselves on the quality of the products we sell and the service we offer as our feedback shows. IMPORTANT INFORMATION FOR INTERNATIONAL CUSTOMERS.
      K03 K04 Upgrade Hybrid Turbocharger Repair Kit fits Borg Warner TRIPLE OIL FEED

      Tags: , , , , , , , ,

    • 300dts Comments Off
      DTS_300DTS_TURBOcharger_UPGRADE_KIT_FIT_TOYOTA_HILUX_3L_TURBO_SYSTEM_2_8LT_01_pzf DTS 300DTS TURBOcharger UPGRADE KIT FIT TOYOTA HILUX 3L TURBO SYSTEM 2.8LT
      DTS 300DTS TURBOcharger UPGRADE KIT FIT TOYOTA HILUX 3L TURBO SYSTEM 2.8LT
      DTS 300DTS TURBOcharger UPGRADE KIT FIT TOYOTA HILUX 3L TURBO SYSTEM 2.8LT

      DTS 300DTS TURBOcharger UPGRADE KIT FIT TOYOTA HILUX 3L TURBO SYSTEM 2.8LT
      DTS Turbo Kit Suits Toyota Hilux 3L 2.8L. NEW DEISEL TURBO SYSTEM – BOLT ON DESIGN. (Product Code: 300 DTS). Toyota Hilux – 3L 2.8 Litre Diesel The DTS Turbocharger System increases power output of the 3L 2.8L engine from 55kW to 82kW giving an increase 45%. Torque is up from 180Nm to 265Nm providing an increase of 45%. Mitsubishi TDO4 Turbocharger, liquid cooled. High temp, high quality cast iron exhaust manifold. Powder coated high flow cast alloy and moulded rubber air ducting. Braided stainless steel oil and coolant lines. Designed to fit with all OEM accessories. Simple connection to standard exhaust system. Engineered for the least amount of fitting time. You are looking at a QUALITY DTS TURBO SYSTEM (BOLT ON) KIT. DTS 300DTS TURBOcharger bolt-on KIT FOR TOYOTA HILUX 3L TURBO SYSTEM 2.8LT. 3L 2.8 Litre Diesel. DTS TURBO BOLT ON KIT. The DTS Turbocharger System increases power output of the 3L 2.8L engine from 55kW to 82kW giving an increase 45%. RETAIL PRICE = 4299/SET. However both warehouses do carry different stock, please ring up before heading down to ensure that parts are available. It is the responsibility of the customer to verify the correct part before ordering and installing a particular part. We are more than happy to assist you. If for any reason you are not happy with our products e. In this way, both parties will have a good result. This item is in the category “Vehicle Parts & Accessories\Car Performance Parts\Other”. The seller is “999autoshop” and is located in this country: AU. This item can be shipped worldwide.
      • MPN: DTS-300DTS
      • Return Postage Charges: Buyer will pay for any return postage
      • Item Picture: NOT the Actual Item (For Reference Only)
      • Manufacturer Part Number: DTS-300DTS
      • Brand: DTS SYSTEM

      DTS 300DTS TURBOcharger UPGRADE KIT FIT TOYOTA HILUX 3L TURBO SYSTEM 2.8LT

      Tags: , , , , , , ,

    • kinugawa Comments Off
      Kinugawa_Turbocharger_Upgrade_Compressor_Kit_fit_SUBARU_TD04L_13T_to_19T_with_WG_01_yfkv Kinugawa Turbocharger Upgrade Compressor Kit fit SUBARU TD04L 13T to 19T with WG
      Kinugawa Turbocharger Upgrade Compressor Kit fit SUBARU TD04L 13T to 19T with WG

      Kinugawa Turbocharger Upgrade Compressor Kit fit SUBARU TD04L 13T to 19T with WG
      Kinugawa Turbocharger Upgrade Compressor Kit fit SUBARU TD04L 13T to 19T w/ WG. Subaru Forester TD04H-19T Turbo Compressor Kit. Upgrade Subaru Forester TD04L-13T to 19T – SUBARU / Forester TD04L TD04HL Turbo – Bearing Housing needs to be machined fit TD04-19T. Wheel with larger exducer diameter. 58 mm / 46 mm(Exducer / Inducer) – 22mm(Hub Length) – 4.99mm(Hole Diameter of Shaft). Aluminum & Steel Alloy. 1 x 19T compressor wheel – 1 x TD04-19T Turbo compressor housing – 1 x Actuator Vacuum – 2 x Clamp – 1 x 0.8 bar actuator. 0.5bar, 0.8bar, 1 bar, 1.2 bar and 1.5 bar actuator is. Bearing housing must be modified to 19T, we also. Offer the 19T bearing housing if you need , please. Brand New – Balanced. Turbo Chargers & Parts. 0.8 Bar / 11.76 Psi. Bank Wire (T/T): Bank wire is also accepted. If we send the wrong item, Kinugawa turbo will send replace part asap once we get your information and pictures. If customers bought wrong parts, we accept the return within 2 weeks from the date of received package. Please check the number on your OEM turbo or parts to make sure if it’s right one for you. Kinugawa Ball Bearing Turbo. Turbo Line and Pipe Kits. SAAB Turbo Water Line Banjo Bolt + Washer Adapter SAAB 9-3 9-5 GT17 To TD04HL. Turbo Forged Compressor Inlet/Outlet Adapter Flange Kit Garrett GT2560R GT2871R. Kinugawa Adjustable Turbocharger Wastegate Forged Actuator Spring 1 bar 14.7 Psi. Kinugawa Performance TD04HL 9 Blade High Flow Turbo Turbine wheel / Balanced. Kinugawa Universal Turbo Adjustable Wastegate Actuator w/ 4 x Rod & 6 x spring. The item “Kinugawa Turbocharger Upgrade Compressor Kit fit SUBARU TD04L 13T to 19T with WG” is in sale since Monday, September 21, 2020. This item is in the category “Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Turbochargers & Parts”. The seller is “kinugawa_turbo” and is located in Nantou. This item can be shipped worldwide.
      • Manufacturer Part Number: 305-22012-001
      • Brand: kinugawa turbo
      • Country/Region of Manufacture: Taiwan
      • Type: Turbos/ Nitrous/ Superchargers
      • Subtype: Turbo Chargers & Parts
      • Intended Use: Replacement Part
      • Balanced: YES
      • Actuator Pressure: 0.8 Bar / 11.76 Psi
      • Unit Quantity: 1

      Kinugawa Turbocharger Upgrade Compressor Kit fit SUBARU TD04L 13T to 19T with WG

      Tags: , , , , ,

    • turbocharger Comments Off
      3_0_Turbocharger_Decat_Downpipe_Fit_Audi_TT_Quattro_S3_Mk1_TYP_8N_1_8T_225BHP_01_jn 3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP

      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP
      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP. Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends. Maximizing Smoothest Exhaust Airflow. High Performance Racing Specs. TIG Welded CNC Machine Flange for Strength and Durability. Inlet/ Outlet Sizes: 3.00/ 2.50. Piping Diameter: 3.00 with Welded Flex Pipe. Increase Engine Output and Efficiency. Gain 10 – 15 HPs. 2 X O2 Sensor Bung Insertion and Metal Gasket Included. Professional Installer is Highly Recommended (No Instruction Included). Item Includes: 1 set downpipe (as pictured). 00-06 Audi TT Quattro Mk1 Typ 8N. 02-06 Audi TT Quattro 225 PS Coupe Mk1 Typ 8N. 99-03 Audi S3 Mk1 Typ 8L. Audi S3 Quattro (98-04). Seat Leon Cupra R 1.8T (99-06). Audi TT Quattro (00-06). We will check item. Bank Wire (T/T) acceptable. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. Then, the updated result will be informed. Don’t give us negative or natural feedback , it’s not a wise choice to solve the problem. We will respond to you within 24 hours. Our working hours are from GMT 03:00 to 12:00. Once you have received your item, please leave feedback for us as this will inform us that you have received your items. How to find turbo code. Ou are not sure fittment for your old turbo , please let us know this information. The PN , OEM code information from your original turbo nameplate. The Engine code & KW , HP , Year for your car. The Photos of your complete turbo. The item “3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP” is in sale since Monday, June 7, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Turbochargers & Parts”. The seller is “fengya32″ and is located in Coalville, United Kingdom. This item can be shipped to United Kingdom.
      • Modified Item: No
      • Country/Region of Manufacture: China
      • Custom Bundle: No
      • Warranty Period: 1 Year
      • Type: Upgrade Kit
      • Fit for: Audi QUATTRO Seat Leon BAM BFV S3 1.8
      • Manufacturer Part Number: CS-DP-AUD01-UK
      • Classic Car Part: Yes
      • Reference OE/OEM Number: 06A145704QX; 06A145704QV
      • Unit Type: Unit
      • Other Part Number: 53049880023
      • Brand: Pro-racing Auto Part

      3.0 Turbocharger Decat Downpipe Fit Audi TT Quattro S3 Mk1 TYP 8N 1.8T 225BHP

      Tags: , , , , ,

    • upgrade Comments Off
      Upgrade_Turbocharger_FITS_GTP38_99_03_Powerstroke_7_3L_Turbo_Repair_Rebuild_7_3_01_zorz Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3
      Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3
      Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3
      Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3

      Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3
      Ford F250 F350 F450 F550 / E250 E350 E450 E550 / Excursion. 1999 2000 2002 2003 7.3L V8 Turbo Diesel Engines. Included in Turbo Repair Kit. GTP38 Compressor Wheel Upgrade. Aftermarket Exhaust Shaft & Exhaust Turbine. Eliminates surge, improves low-end throttle response. And will produce a much louder “whistle” sound over the stock wheel. 2 Years on all products for replacement. We will not be responsible for loss of use, personal injury, or any incidental or consequential damage to an engine / vehicle, or otherwise caused, or purported to be caused, by any product. All warranties cover parts only. Labor to replace a component is not covered. Also not covered is any damage caused through improper operation or installation. The purchaser agrees that any legal action must be brought in the county of Canada, Province of British Columbia. Napol Performance Parts Napol Performance Is a Canadian based Company Specializing in Performance Coil Pack Development. We Have a wide range of Import and Domestic High performance coil systems. Every month we are expanding into new product ranges. Thanks, Napol Performance Products. The item “Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3″ is in sale since Sunday, April 7, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “npboosted” and is located in Campbell River, British Columbia. This item can be shipped worldwide.
      • Model: F250, F350, F450, E350, E450, E550, Excursion
      • Modified Item: Yes
      • Interchange Part Number: GTP38 Turbo Rebuild kit
      • Type: Upgrade Kit
      • Surface Finish: Steel
      • Manufacturer Part Number: NP-GTP38ZR
      • Modification Description: GTP38 Rebuild Kit Turbine Compressor wheel and exhaust wheel
      • Placement on Vehicle: Turbocharger rebuild kit
      • Other Part Number: 8131001001, 8171004002F, 813-1001-001, 817-1004-00
      • Brand: Npboosted
      • Fitment Type: Performance/Custom
      • Warranty: 1 Year

      Upgrade Turbocharger FITS GTP38 99-03 Powerstroke 7.3L Turbo Repair Rebuild 7.3

      Tags: , , , , , , , ,

    • fits Comments Off
      Fits_02_05_Audi_A4_1_8T_Blue_Turbocharger_Aluminum_Intercooler_Piping_Kit_01_mz Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit

      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit
      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit. 02-05 Audi A4 B6 1.8LTurbo Intercooler Piping Kit. Intercooler Piping are CNC Machine Mandrel Bent. Made From High Quality 6061 Aluminum Material with Chrome finish. Extra Thick Piping and Increased Air Flow. All TIG Welded 6061 Aluminum. PSi Drop under 0.2. Other Intercooler usually drop 10Psi Some are More. Comes with 3x Various Turbo Pipes. T Bolt clamps, Couplers and Various Accessories. Brand new condition never used! Tube & Fin Design. Other Intercooler usually drop 10 Psi Some are More. Max PSi is 30 Up to 400HP. Intercooler Size: 25.25″ X 9.50″ X 2.25. Core Size: 17.5″ x 9.5″ x 1.8Inlet/Outlet. Brackets are not included. This is an upgrade kit may require additional parts. Additional piping may be required depending on your desired set up. Communication is very important and we will try our best to assist all our customers. Questions are answered in the order they arrive. Questions will be answered as quickly as possible. (NOTE: This does not include weekend and holidays). Items may not always be in stock. Insufficient information will delay the order process so please read the invoice carefully during checkout. Ground Carriers do not deliver to PO BOX (additional charges will be applied unless a physical address is given). We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Tracking numbers are also available upon request. Customer is responsible for making any changes prior to purchasing. BOX , PR , HI , AK , GU , VI , APO , FPO. Canada and International Countries. No orders are processed after a certain time. All return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R. N from our customer service representatives before returning a product. Merchandise return without R. Please write the R. It is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. We do not offer local pick-ups. Replacements will not be sent until the claim is approved. Instructions are not included unless stated in the description. We are retailers of the parts and are not trained technicians. We can provide minimal support, but we will try our best to help. NOTE : All of turbo parts and performance may require slight modification in order to fits perfectly. Most aftermarket items are produced for off-road or show purpose only. These items are not suitable for regular driving. User must follow the direction given and any m isuse of this product is at his/her own risk. The item “Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit” is in sale since Thursday, October 17, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “hdgperformance” and is located in San Bernardino, California. This item can be shipped worldwide.
      • Installation Guide: No Installation Guide Included
      • Other Part Number: Racing Drag Track Drift Turbo Pipes Silicone Turbocharger Bolt On
      • Warranty: Yes
      • Manufacturer Part Number: PKICCOMBO-615-710-O2
      • Quantity: Intercooler/Piping Kit/Couplers/Hardware
      • Placement on Vehicle: Front
      • Brand: HDG Performance
      • Specifics: May Require Additional Parts
      • Interchange Part Number: Aluminum Intercooler Piping Couplers Upgrade Replacement EDM Set
      • Fitment: 02-05 Audi A4 1.8T Quattro B6
      • Surface Finish: Aluminum Silver
      • Notes: Professional Installation Recommended

      Fits 02-05 Audi A4 1.8T Blue Turbocharger Aluminum Intercooler + Piping Kit

      Tags: , , , , , , ,

    • universal Comments Off
      Universal_T3_T4_Black_12PC_Piping_Coupler_400_HP_V_Band_Turbocharger_Upgrade_Kit_01_jp Universal T3/T4 Black 12PC Piping/Coupler 400+HP V-Band Turbocharger Upgrade Kit

      Universal T3/T4 Black 12PC Piping/Coupler 400+HP V-Band Turbocharger Upgrade Kit
      Universal T3/T4 Black 12PC Piping/Coupler 400+HP V-Band Turbocharger Upgrade Kit. Horsepower is crucial for racing domination. But what is the most efficient method to improve the horsepower of your project car? The answer is TURBO. You need to have the right weapon for your project car if you wish to leave the competition behind. A turbo charger kit is the most powerful weapon for street and track car applications. A turbo kit will drastically boost up the intake and exhaust air flow of the engine. When it comes to racing or everyday excitement, it is the most important weapon for your ride. Package comes with Everything shown from the picture above (color may vary on some items). NOTE: This is a universal Kit. This Kit Will add 50-70+hp at 7 psi. You will need Turbo Manifold to complete the Turbo Kit Project! 63 AR V-Band Turbo Charger. Inlet: 3.0 Inch. Outlet: 2.0 Inch. 2.5” V-band Downpipe Flange. 4 Bolt Exhaust Flange. Internal wastegate set around 8 psi. 2.207 or 56.06mm inducer. 2.567 or 65.20mm Major. M24 / T4 Compressor Housing. 2.756 or 70.00mm Major. 2.131 or 54.14mm Minor. Professional installation in highly recommended (No instruction included). Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size. Universal Black 2.5 12 Piece turbo intercooler piping kit. Made of 6061 aluminum. 2.5 inch diameter piping kit with high quality silicone couplers and T-bolt clamps. The couplers will not split easily + the clamps will not strip like the cheap kind. Strong & tighter fitting use hair spray between the pipe and coupler. Mandrel bend for high flow and high horse power and better turbo response power. Type-RS Blow Off Valve. Brand New, Light Weight, High Quality CNC Billet Aluminum Type S Style Blow off Valve and 2.5 Inch Type S/Rs Flange Pipe. Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Our Blow Off Valves Are easily adjustable to prevent both permature boost leakage and compressor surge. Fast Fesponse One For Low And High Boost Pressure. Can hold up to 1000+ HP. Brand New, Light Weight, High Quality CNC Billet Aluminum Manual Turbo Boost Controller. Adjustable boost knob increases horsepower and torque, depends on boost level. Allows adjustable boost PSI setting, can be easily mount under the hood. Up To 30 PSi Boost. Turbo Oil Return / Feeding Line Kit. Brand New, Light Weight, High Quality Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Material: Stainless Steel Braided. Installation: Instruction is Not Included, Professional Installation is highly recommended. 1x T3/T4 V-Band Turbocharger. 1x Oil Feed Line. 1x Oil Return Line. 1x Tubo Boost Controller. 1x Type-RS Blow Off Valve. 1x Universal 2.5 12 Piece Turbo Piping Kit. 1x 12 Piece 2.5 Silicone Couplers. 1x Type RS BOV Adapter Pipe. Universal Fit Most Gasoline Car Models. We reserve the right to choose the service. · Its our goal to provide 100% satisfaction to our customers. Item must has their original packaging, no signs of being installed or mounted, used, cut wires or scratches. Item must be original saleable condition (which is determined solely by our company). However, it is required that you provide a photo to show us the problem before we issue a return label for you. · All of our items are made by OE approved manufacturers and they were tested in factory. All damaged products are considered damaged during transit (even though outer box is not damaged). Please inspect and hand-fit all items by the time it arrive. No claims will be accepted after 7 days. However, if the claim is denied, we will NOT be responsible for the lost package (this does not apply to damaged item). Be sure to clearly indicate the reason of requesting a product return. This includes, but is not limited to, no signs of being installed or mounted, no cut wires, no scratches. It is the sole responsibility of the customer and/or installer to confirm the correctness of size and application before installation. · After we received your return item, we will verify the problem and open the inspection process. Please given a reasonable amount of time allow us to process your return item. · We do not make the products, installation instructions are not included in most cases. Please consult with mechanics who has experience installing aftermarket products. · We are not obligated to provide installation guide. We might or might not have the installation instruction for the item we sell. We strive for 5 star service. We can also be reached at. And one of our representatives will assist you with the return process. All we ask is that you send the items back to us within 14 days upon receipt in the original packaging, and make sure that the merchandise is in the same condition. Thank you for viewing our listing and taking the time to read our terms and conditions of the sale of our products. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Universal T3/T4 Black 12PC Piping/Coupler 400+HP V-Band Turbocharger Upgrade Kit” is in sale since Tuesday, April 26, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “mexykanbidder” and is located in Rancho Cucamonga, California. This item can be shipped worldwide.
      • Brand: Mexykanbidder
      • Manufacturer Part Number: Universal T3/T4 V-Band Turbo/Turbocharger Kit
      • Interchange Part Number: Universal Fit/Aftermarket Upgrade Trubo Charger Kit
      • Other Part Number: 2.5″ 12pc FMIC piping
      • Placement on Vehicle: Front, Rear, Right, Left
      • Surface Finish: Aluminum/Steel
      • Warranty: Yes

      Universal T3/T4 Black 12PC Piping/Coupler 400+HP V-Band Turbocharger Upgrade Kit

      Tags: , , , , , , , ,

    • 12pc Comments Off
      12PC_Piping_Universal_2_5_Intercooler_Blow_Off_Valve_V_Band_Turbocharger_Kit_01_nnwu 12PC Piping Universal 2.5 Intercooler/Blow Off Valve V-Band Turbocharger Kit

      12PC Piping Universal 2.5 Intercooler/Blow Off Valve V-Band Turbocharger Kit
      12PC Piping Universal 2.5 Intercooler/Blow Off Valve V-Band Turbocharger Kit. Horsepower is crucial for racing domination. But what is the most efficient method to improve the horsepower of your project car? The answer is TURBO. You need to have the right weapon for your project car if you wish to leave the competition behind. A turbo charger kit is the most powerful weapon for street and track car applications. A turbo kit will drastically boost up the intake and exhaust air flow of the engine. When it comes to racing or everyday excitement, it is the most important weapon for your ride. Package comes with Everything shown from the picture above (color may vary on some items). NOTE: This is a universal Kit. This Kit Will add 50-70+hp at 7 psi. You will need Turbo Manifold to complete the Turbo Kit Project! 63 AR V-Band Turbo Charger. Inlet: 3.0 Inch. Outlet: 2.0 Inch. 2.5” V-band Downpipe Flange. 4 Bolt Exhaust Flange. Internal wastegate set around 8 psi. 2.207 or 56.06mm inducer. 2.567 or 65.20mm Major. M24 / T4 Compressor Housing. 2.756 or 70.00mm Major. 2.131 or 54.14mm Minor. Professional installation in highly recommended (No instruction included). Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size. Universal Black 2.5 12 Piece turbo intercooler piping kit. Made of 6061 aluminum. 2.5 inch diameter piping kit with high quality silicone couplers and T-bolt clamps. The couplers will not split easily + the clamps will not strip like the cheap kind. Strong & tighter fitting use hair spray between the pipe and coupler. Mandrel bend for high flow and high horse power and better turbo response power. Type-RS Blow Off Valve. Brand New, Light Weight, High Quality CNC Billet Aluminum Type S Style Blow off Valve and 2.5 Inch Type S/Rs Flange Pipe. Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Our Blow Off Valves Are easily adjustable to prevent both permature boost leakage and compressor surge. Fast Fesponse One For Low And High Boost Pressure. Can hold up to 1000+ HP. Brand New, Light Weight, High Quality CNC Billet Aluminum Manual Turbo Boost Controller. Adjustable boost knob increases horsepower and torque, depends on boost level. Allows adjustable boost PSI setting, can be easily mount under the hood. Up To 30 PSi Boost. Turbo Oil Return / Feeding Line Kit. Brand New, Light Weight, High Quality Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Material: Stainless Steel Braided. Installation: Instruction is Not Included, Professional Installation is highly recommended. 1x T3/T4 V-Band Turbocharger. 1x Oil Feed Line. 1x Oil Return Line. 1x Tubo Boost Controller. 1x Type-RS Blow Off Valve. 1x Universal 2.5 12 Piece Turbo Piping Kit. 1x 12 Piece 2.5 Silicone Couplers. 1x Type RS BOV Adapter Pipe. Universal Fit Most Gasoline Car Models. We reserve the right to choose the service. · Its our goal to provide 100% satisfaction to our customers. Item must has their original packaging, no signs of being installed or mounted, used, cut wires or scratches. Item must be original saleable condition (which is determined solely by our company). However, it is required that you provide a photo to show us the problem before we issue a return label for you. · All of our items are made by OE approved manufacturers and they were tested in factory. All damaged products are considered damaged during transit (even though outer box is not damaged). Please inspect and hand-fit all items by the time it arrive. No claims will be accepted after 7 days. However, if the claim is denied, we will NOT be responsible for the lost package (this does not apply to damaged item). Be sure to clearly indicate the reason of requesting a product return. This includes, but is not limited to, no signs of being installed or mounted, no cut wires, no scratches. It is the sole responsibility of the customer and/or installer to confirm the correctness of size and application before installation. · After we received your return item, we will verify the problem and open the inspection process. Please given a reasonable amount of time allow us to process your return item. · We do not make the products, installation instructions are not included in most cases. Please consult with mechanics who has experience installing aftermarket products. · We are not obligated to provide installation guide. We might or might not have the installation instruction for the item we sell. We strive for 5 star service. We can also be reached at. And one of our representatives will assist you with the return process. All we ask is that you send the items back to us within 14 days upon receipt in the original packaging, and make sure that the merchandise is in the same condition. Thank you for viewing our listing and taking the time to read our terms and conditions of the sale of our products. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “12PC Piping Universal 2.5 Intercooler/Blow Off Valve V-Band Turbocharger Kit” is in sale since Tuesday, April 26, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “mexykanbidder” and is located in Rancho Cucamonga, California. This item can be shipped worldwide.
      • Brand: Mexykanbidder
      • Manufacturer Part Number: Universal T3/T4 V-Band Turbo/Turbocharger Kit
      • Interchange Part Number: Universal Fit/Aftermarket Upgrade Trubo Charger Kit
      • Other Part Number: 2.5″ 12pc FMIC piping
      • Placement on Vehicle: Front, Rear, Right, Left
      • Surface Finish: Aluminum/Steel
      • Warranty: Yes

      12PC Piping Universal 2.5 Intercooler/Blow Off Valve V-Band Turbocharger Kit

      Tags: , , , , , ,

    • univerial Comments Off
      Univerial_T3_T4_Turbo_Kit_V_Band_TurboCharger_Blow_Off_Valve_Couplers_Black_01_pfo Univerial T3/T4 Turbo Kit V-Band TurboCharger + Blow Off Valve + Couplers Black

      Univerial T3/T4 Turbo Kit V-Band TurboCharger + Blow Off Valve + Couplers Black
      Univerial T3/T4 Turbo Kit V-Band TurboCharger + Blow Off Valve + Couplers Black. Horsepower is crucial for racing domination. But what is the most efficient method to improve the horsepower of your project car? The answer is TURBO. You need to have the right weapon for your project car if you wish to leave the competition behind. A turbo charger kit is the most powerful weapon for street and track car applications. A turbo kit will drastically boost up the intake and exhaust air flow of the engine. When it comes to racing or everyday excitement, it is the most important weapon for your ride. Package comes with Everything shown from the picture above (color may vary on some items). NOTE: This is a universal Kit. This Kit Will add 50-70+hp at 7 psi. You will need Turbo Manifold to complete the Turbo Kit Project! 63 AR V-Band Turbo Charger. Inlet: 3.0 Inch. Outlet: 2.0 Inch. 2.5” V-band Downpipe Flange. 4 Bolt Exhaust Flange. Internal wastegate set around 8 psi. 2.207 or 56.06mm inducer. 2.567 or 65.20mm Major. M24 / T4 Compressor Housing. 2.756 or 70.00mm Major. 2.131 or 54.14mm Minor. Professional installation in highly recommended (No instruction included). Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size. Universal Black 2.5 12 Piece turbo intercooler piping kit. Made of 6061 aluminum. 2.5 inch diameter piping kit with high quality silicone couplers and T-bolt clamps. The couplers will not split easily + the clamps will not strip like the cheap kind. Strong & tighter fitting use hair spray between the pipe and coupler. Mandrel bend for high flow and high horse power and better turbo response power. Type-RS Blow Off Valve. Brand New, Light Weight, High Quality CNC Billet Aluminum Type S Style Blow off Valve and 2.5 Inch Type S/Rs Flange Pipe. Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Our Blow Off Valves Are easily adjustable to prevent both permature boost leakage and compressor surge. Fast Fesponse One For Low And High Boost Pressure. Can hold up to 1000+ HP. Brand New, Light Weight, High Quality CNC Billet Aluminum Manual Turbo Boost Controller. Adjustable boost knob increases horsepower and torque, depends on boost level. Allows adjustable boost PSI setting, can be easily mount under the hood. Up To 30 PSi Boost. Turbo Oil Return / Feeding Line Kit. Brand New, Light Weight, High Quality Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Material: Stainless Steel Braided. Installation: Instruction is Not Included, Professional Installation is highly recommended. 1x T3/T4 V-Band Turbocharger. 1x Oil Feed Line. 1x Oil Return Line. 1x Tubo Boost Controller. 1x Type-RS Blow Off Valve. 1x Universal 2.5 12 Piece Turbo Piping Kit. 1x 12 Piece 2.5 Silicone Couplers. 1x Type RS BOV Adapter Pipe. Universal Fit Most Gasoline Car Models. We reserve the right to choose the service. · Its our goal to provide 100% satisfaction to our customers. Item must has their original packaging, no signs of being installed or mounted, used, cut wires or scratches. Item must be original saleable condition (which is determined solely by our company). However, it is required that you provide a photo to show us the problem before we issue a return label for you. · All of our items are made by OE approved manufacturers and they were tested in factory. All damaged products are considered damaged during transit (even though outer box is not damaged). Please inspect and hand-fit all items by the time it arrive. No claims will be accepted after 7 days. However, if the claim is denied, we will NOT be responsible for the lost package (this does not apply to damaged item). Be sure to clearly indicate the reason of requesting a product return. This includes, but is not limited to, no signs of being installed or mounted, no cut wires, no scratches. It is the sole responsibility of the customer and/or installer to confirm the correctness of size and application before installation. · After we received your return item, we will verify the problem and open the inspection process. Please given a reasonable amount of time allow us to process your return item. · We do not make the products, installation instructions are not included in most cases. Please consult with mechanics who has experience installing aftermarket products. · We are not obligated to provide installation guide. We might or might not have the installation instruction for the item we sell. We strive for 5 star service. We can also be reached at. And one of our representatives will assist you with the return process. All we ask is that you send the items back to us within 14 days upon receipt in the original packaging, and make sure that the merchandise is in the same condition. Thank you for viewing our listing and taking the time to read our terms and conditions of the sale of our products. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Univerial T3/T4 Turbo Kit V-Band TurboCharger + Blow Off Valve + Couplers Black” is in sale since Tuesday, April 26, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “mexykanbidder” and is located in Rancho Cucamonga, California. This item can be shipped worldwide.
      • Brand: Mexykanbidder
      • Manufacturer Part Number: Universal T3/T4 V-Band Turbo/Turbocharger Kit
      • Interchange Part Number: Universal Fit/Aftermarket Upgrade Trubo Charger Kit
      • Other Part Number: 2.5″ 12pc FMIC piping
      • Placement on Vehicle: Front, Rear, Right, Left
      • Surface Finish: Aluminum/Steel
      • Warranty: Yes

      Univerial T3/T4 Turbo Kit V-Band TurboCharger + Blow Off Valve + Couplers Black

      Tags: , , , , , , , ,

    • universal Comments Off
      Universal_T3_T4_63AR_400_HP_V_Band_Internal_Wastegate_Turbocharger_Upgrade_Kit_01_bxyu Universal T3/T4.63AR 400+HP V-Band Internal Wastegate Turbocharger Upgrade Kit

      Universal T3/T4.63AR 400+HP V-Band Internal Wastegate Turbocharger Upgrade Kit
      63AR 400+HP V-Band Internal Wastegate Turbocharger Upgrade Kit. Horsepower is crucial for racing domination. But what is the most efficient method to improve the horsepower of your project car? The answer is TURBO. You need to have the right weapon for your project car if you wish to leave the competition behind. A turbo charger kit is the most powerful weapon for street and track car applications. A turbo kit will drastically boost up the intake and exhaust air flow of the engine. When it comes to racing or everyday excitement, it is the most important weapon for your ride. Package comes with Everything shown from the picture above (color may vary on some items). NOTE: This is a universal Kit. This Kit Will add 50-70+hp at 7 psi. You will need Turbo Manifold to complete the Turbo Kit Project! 63 AR V-Band Turbo Charger. Inlet: 3.0 Inch. Outlet: 2.0 Inch. 2.5” V-band Downpipe Flange. 4 Bolt Exhaust Flange. Internal wastegate set around 8 psi. 2.207 or 56.06mm inducer. 2.567 or 65.20mm Major. M24 / T4 Compressor Housing. 2.756 or 70.00mm Major. 2.131 or 54.14mm Minor. Professional installation in highly recommended (No instruction included). Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size. Universal Black 2.5 12 Piece turbo intercooler piping kit. Made of 6061 aluminum. 2.5 inch diameter piping kit with high quality silicone couplers and T-bolt clamps. The couplers will not split easily + the clamps will not strip like the cheap kind. Strong & tighter fitting use hair spray between the pipe and coupler. Mandrel bend for high flow and high horse power and better turbo response power. Type-RS Blow Off Valve. Brand New, Light Weight, High Quality CNC Billet Aluminum Type S Style Blow off Valve and 2.5 Inch Type S/Rs Flange Pipe. Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Our Blow Off Valves Are easily adjustable to prevent both permature boost leakage and compressor surge. Fast Fesponse One For Low And High Boost Pressure. Can hold up to 1000+ HP. Brand New, Light Weight, High Quality CNC Billet Aluminum Manual Turbo Boost Controller. Adjustable boost knob increases horsepower and torque, depends on boost level. Allows adjustable boost PSI setting, can be easily mount under the hood. Up To 30 PSi Boost. Turbo Oil Return / Feeding Line Kit. Brand New, Light Weight, High Quality Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life. Material: Stainless Steel Braided. Installation: Instruction is Not Included, Professional Installation is highly recommended. 1x T3/T4 V-Band Turbocharger. 1x Oil Feed Line. 1x Oil Return Line. 1x Tubo Boost Controller. 1x Type-RS Blow Off Valve. 1x Universal 2.5 12 Piece Turbo Piping Kit. 1x 12 Piece 2.5 Silicone Couplers. 1x Type RS BOV Adapter Pipe. Universal Fit Most Gasoline Car Models. We reserve the right to choose the service. · Its our goal to provide 100% satisfaction to our customers. Item must has their original packaging, no signs of being installed or mounted, used, cut wires or scratches. Item must be original saleable condition (which is determined solely by our company). However, it is required that you provide a photo to show us the problem before we issue a return label for you. · All of our items are made by OE approved manufacturers and they were tested in factory. All damaged products are considered damaged during transit (even though outer box is not damaged). Please inspect and hand-fit all items by the time it arrive. No claims will be accepted after 7 days. However, if the claim is denied, we will NOT be responsible for the lost package (this does not apply to damaged item). Be sure to clearly indicate the reason of requesting a product return. This includes, but is not limited to, no signs of being installed or mounted, no cut wires, no scratches. It is the sole responsibility of the customer and/or installer to confirm the correctness of size and application before installation. · After we received your return item, we will verify the problem and open the inspection process. Please given a reasonable amount of time allow us to process your return item. · We do not make the products, installation instructions are not included in most cases. Please consult with mechanics who has experience installing aftermarket products. · We are not obligated to provide installation guide. We might or might not have the installation instruction for the item we sell. We strive for 5 star service. We can also be reached at. And one of our representatives will assist you with the return process. All we ask is that you send the items back to us within 14 days upon receipt in the original packaging, and make sure that the merchandise is in the same condition. Thank you for viewing our listing and taking the time to read our terms and conditions of the sale of our products. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Universal T3/T4.63AR 400+HP V-Band Internal Wastegate Turbocharger Upgrade Kit” is in sale since Tuesday, April 26, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “mexykanbidder” and is located in Rancho Cucamonga, California. This item can be shipped worldwide.
      • Brand: Mexykanbidder
      • Manufacturer Part Number: Universal T3/T4 V-Band Turbo/Turbocharger Kit
      • Interchange Part Number: Universal Fit/Aftermarket Upgrade Trubo Charger Kit
      • Other Part Number: 2.5″ 12pc FMIC piping
      • Placement on Vehicle: Front, Rear, Right, Left
      • Surface Finish: Aluminum/Steel
      • Warranty: Yes

      Universal T3/T4.63AR 400+HP V-Band Internal Wastegate Turbocharger Upgrade Kit

      Tags: , , , , , , ,

    « Previous Entries