Mens / Womens Shavers. InCarTec FK-946-PDC Double Din Stereo Fitting Kit (WITH SWC and PDC). The interface in this fitting kit also maintains date, time & temperature display and retains the OEM parking sensor audio by using a new parking buzzer. Also includes CAN ignition and speed pulse for Navigation systems. Double Din Fascia Kit (GLOSS SILVER). Steering Wheel Control / Parking Sensor Retention Interface. Fakra to DIN Antenna Adapter. Universal Patch Lead (Included). Compatible with following vehicles. Car Make / Model. Some dashboard modification is required for the installation of this product. The OEM stereo cannot be reinstalled after these modifications have been made Sometimes the built-in combination switch cannot be removed from the vehicles factory fitted fascia surround and must be replaced. An Additional Lock/ Hazard Switch (FORD-F1519127). Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. A steering wheel control interface is also included in this kit. This will retain the use of the original audio controls on the steering wheel with the new radio. CAN-Bus Steering Wheel Control Interface. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel. Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also maintains date, time & temperature display, OEM parking sensor audio with new parking buzzer. Includes CAN ignition and speed pulse for Navigation systems. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Universal patch lead for 29-CT series steering controls. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
