Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in Ford cars with an original oval shape radio. This head unit fitting kit includes. ISO to DIN Antenna adapter (21-100). Antenna adapter cable for European cars that have an ISO original style antenna cable. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers. Steering wheel control interface (29-654). Steering wheel control interface and adapter cable for Ford C-Max, Fiesta, Focus, Fusion, Galaxy, Kuga, Mondeo, S-Max and Transit vehicles to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. NOTE: Some cars do not have an ignition power supply in the original quadlock, these cars will require an ignition supply to be hardwired. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and source buttons. PLEASE NOTE: Some cars do not have an ignition power supply in the original quadlock, these cars will require an ignition supply to be hardwired. An alternative interface is available with a built in CANbus ignition interface for plug and play installation. Universal SWC patch lead (29-025). Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. Ford Double DIN Oval radio fascia adapter and cage kit (50-876/1). Car radio fascia adaptor panel to allow the fitting of an aftermarket Double DIN car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia adaptor is supplied with a 103mm cage, no additional cage is required. PLEASE NOTE: Some branded and other unbranded CHINESE Head Units vary in size and will not fit. Please check the dimensions of your Head Unit and compare to our flush fit dimensions (172mm x 98mm).
