Mens / Womens Shavers. InCarTec FK-306 Fascia Fitting kit For Nissan. Complete fitting kit to install a Single or Double DIN aftermarket head unit and retain the original steering wheel controls in Nissan 350Z car model with factory fitted BOSE audio systems. Single / Double Din Fascia Adaptor Panel (ANTHRACITE BLACK). Steering Control Interface with Phono Connectors. Universal Patch Lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version Fits Nissan 350Z Coupe and Roadster with the facelift dashboard. The facelift dashboard has the hazard warning light switch below the air conditioning controls and ahead of the gearstick and a larger silver plastic piece around the gear stick – as opposed to the simple silver ring around the gear stick on the pre-facelift dashboard. A removable pocket is provided for Single DIN installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and radio adapter cable for Nissan cars, with 16 and 8 pin connectors, to fit an aftermarket radio upgrade. The cable adapts from the Nissan twin 10 and 6 pin connectors and the smaller 16 pin connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. This adapter cable also retains the use of the original Bose amplifier by using the preout connections on the back of the new radio. The steering wheel control interface is built in to the adapter cable. The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
