This fitting kit will also retain use of the top screen for both navigation and air con visualisation when fitting an after market radio. Kit includes a amplifier bypass cable for Lexus RX (XU30) built between 2004 – 2006 with original Mark Levinson Sound System. This allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the rear seat. This head unit fitting kit includes. Lexus RX Screen Retention Resistive Loop (20-220). Lexus RX resistive loop to retain the top screen on all Lexus RX (XU30) built between 2004 – 2006 and models built between 2007 – 2009 with navigation. Retains use of the top screen for both navigation and air con visualisation after an after market radio has been fitted. For models with a 12 pin plug in the original radio. Lexus RX 03-06 Mark Levinson amplifier bypass cable (20-315). Amplifier bypass cable for Lexus RX (XU30) built between 2004 – 2006 with original Mark Levinson Sound System. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the rear seat. This bypass cable comes with a 5m speaker extension to extend from the radio to the amplifier under the rear seat. Steering wheel control interface (29-728). Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. This steering wheel controls interface does not include speaker wiring and is designed for use with an amplifier bypass cable. Use amplifier bypass part 20-315 for 2003 – 2006 models and part 20-318 for 2007 – 2009 models. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, and retains the top screen on 07-09 models without navigation. For all 2003 – 2006 models and 2007 – 2009 models with navigation use with part 20-220 to retain the top screen. Suitable for Lexus RX350 and RX400H 2003 – 2009 with Mark Levinson Sound. Universal SWC patch lead (29-025). Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. A removable pocket is included for Single DIN installation. Fascia gap size: 172mm x 98mm.
