• Category:

    • double Comments Off
      Double_Din_Upgrade_Fitting_Kit_Composition_Colour_and_Media_for_Seat_Alhambra_01_ep Double Din Upgrade Fitting Kit (Composition Colour and Media) for Seat Alhambra
      Double Din Upgrade Fitting Kit (Composition Colour and Media) for Seat Alhambra

      Double Din Upgrade Fitting Kit (Composition Colour and Media) for Seat Alhambra
      Mens / Womens Shavers. V2 (Composition Colour and Media) Complete Double Din Stereo Upgrade Kit. Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection. This is to replace original Composition or Discover radios. Double Din Flush Fit Fascia Adapter With Side Fixing Brackets. Radio Replacement Steering Wheel Adapter Interface. Double Fakra Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This is for a new style (2015 onwards) Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins in the corner of the connector. DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION. PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control CAN Interface adapter cable. Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK). This interface comes with a double fakra antenna adapter, so no additional antenna adapter is required with this part. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Double moulded Fakra Aerial adapter cable for European cars that have amplified original antennas. Use with cars that have twin antenna both requiring power. Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. THIS FITTING KIT IS COMPATIBLE WITH VOLKSWAGEN ORIGINAL HEAD UNITS FITTED WITH THE NEWER QUADLOCK AND A DOUBLE FAKRA CONNECTION, PLEASE SEE PICTURES BELOW. VW Composition Media (also fits Composition Audio and Composition Colour). That some vehicles have original DAB. This is not retained with this kit and will require 21-037 Fakra to SMB adapter. This kit also does not retain original reverse cameras or USB and AUX ports. Please see the other items listed against your car and original head unit to see if these are available as they vary by model and originally fitted radio. Not suitable for original amplified systems (Dynaudio, Fender). The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
      Double Din Upgrade Fitting Kit (Composition Colour and Media) for Seat Alhambra

      Tags: , , , , , , ,

    • double Comments Off
      Car_Double_Din_Stereo_Upgrade_Fitting_Kit_for_Seat_Alhambra_Altea_Leon_Toledo_01_snn Car Double Din Stereo Upgrade Fitting Kit for Seat Alhambra Altea Leon Toledo
      Car Double Din Stereo Upgrade Fitting Kit for Seat Alhambra Altea Leon Toledo

      Car Double Din Stereo Upgrade Fitting Kit for Seat Alhambra Altea Leon Toledo
      Mens / Womens Shavers. V2 Double Din Stereo Upgrade Fitting Kit (Steering wheel controls). Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars. This kit also fits various Skoda and Seat cars. Suitable for Skoda Superb cars with the original Columbus navigation radio. This is an alternative product to FK-699-SWC1-D. Double Din Flush Fit Fascia Adapter With Side Fixing Brackets. Radio Replacement Steering Wheel Adapter Interface. Double Fakra Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. No radio information will be shown on the original display in the car. This is an alternative product to 49-VW-01. An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Double Fakra to DIN antenna adapter cable with 12v phantom power. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade. Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. THIS FITTING KIT IS COMPATIBLE WITH VOLKSWAGEN ORIGINAL HEAD UNITS FITTED WITH A DOUBLE FAKRA CONNECTION, PLEASE SEE PICTURES BELOW. That some vehicles have original DAB. This is not retained with this kit and will require 21-037 Fakra to SMB adapter. This kit also does not retain original reverse cameras or USB and AUX ports. Please see the other items listed against your car and original head unit to see if these are available as they vary by model and originally fitted radio. Not suitable for original amplified systems (Dynaudio, Fender) Please use FK-699-SWC2-D for these models. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
      Car Double Din Stereo Upgrade Fitting Kit for Seat Alhambra Altea Leon Toledo

      Tags: , , , , , , , ,

    • inch Comments Off
      Car_6_5_Inch_BLAM_EXPRESS_Speaker_Upgrade_Fitting_Kit_for_Seat_Alhambra_01_zkm Car (6.5 Inch) BLAM EXPRESS Speaker Upgrade Fitting Kit for Seat Alhambra
      Car (6.5 Inch) BLAM EXPRESS Speaker Upgrade Fitting Kit for Seat Alhambra
      Car (6.5 Inch) BLAM EXPRESS Speaker Upgrade Fitting Kit for Seat Alhambra
      Car (6.5 Inch) BLAM EXPRESS Speaker Upgrade Fitting Kit for Seat Alhambra

      Car (6.5 Inch) BLAM EXPRESS Speaker Upgrade Fitting Kit for Seat Alhambra
      Mens / Womens Shavers. InCarTec SFK-VW1-ES165 165mm (6.5 Inch) Complete BLAM EXPRESS Speaker Upgrade Fitting Kit. Provide a full sound upgrade to your Volkswagen or Skoda’s front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits Volkswagen group vehicles including the Volkswagen Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Please see our compatibility list for more cars that can benefit from this upgrade kit. This speaker upgrade kit offers a significant upgrade in audio quality when fitted with the original head unit in the vehicle. It also works very well with aftermarket head units and amplifiers. This Complete Speaker Fitting Kit Includes. BLAM 165ES 165mm (6.5) EXPRESS 2-Way component speakers (Pair). 165mm VW speaker adapter panels (Pair). Specially modified VW speaker adapter cable harness (Pair). 2 x Skinz expert sound deadening sheets. Nuts and bolt fixings. Compatible with following vehicles. Car Make / Model. BLAM 165ES 165mm (6.5) EXPRESS 2-Way Component Speakers. High-sensitivity 2ohm, 2-way component system This kit is composed of two 165 mm (6.5″) woofers, two 20 mm (3/4″) soft dome tweeters and two separated high pass 6dB/octave crossovers. 165mm Speaker Adapter Panels. Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort. These extra depth 70mm speaker panels are suitable for front doors on select VW vehicles including Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Also fit Skoda Octavia II, III and Skoda Superb car models. Speaker Adapter Cable Harness. These custom made speaker adapter cables suit a variety of Volkswagen group cars and van and make fitting new component speakers a breeze. Joined with bullet connections for ease of installation, the pair of cables adapt from the original speaker connection in the door and have enough length to be routed around the door and through trunking to even reach tweeters located in the A pillars. Skinz Expert Sound Deadening Sheets. Skinz Expert sound deadening sheets provide ultra-effective noise deadening and vibration control on sheet metal and plastic surfaces. It can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system. The doors on T5 and T6 transporters can get wet inside due to rain getting past the weather strip below the window which then drains from the bottom of the door. To protect the speakers from this moisture we offer optional silicon baffles which create a splash proof seal around the back of the speaker against the outer door skin with the added benefit of reducing interference between sound from the front and rear of the speaker.
      Car (6.5 Inch) BLAM EXPRESS Speaker Upgrade Fitting Kit for Seat Alhambra

      Tags: , , , , , , ,

    • inch Comments Off
      6_5_Inch_Complete_RECOIL_Coaxial_Speaker_Upgrade_Fitting_Kit_for_Seat_Alhambra_01_fgc 6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra

      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra
      Mens / Womens Shavers. InCarTec SFK-VW01-RCX165 (6.5 Inch) Complete RECOIL Coaxial Speaker Upgrade Fitting Kit. Provide a full sound upgrade to your Seat, VW, Skoda’s front doors with our complete 165mm (6.5 inch)RECOIL coaxial speaker upgrade fitting kit. Each fitting kit contains a set of Recoil Echo-Series RCX65 165mm (6.5 inch) 200 watt 2-way full-range coaxial speakers. Complete Speaker Fitting Kit Includes. Recoil Echo-Series RCX65 165mm (6.5 inch) coaxial speakers (SPK-REC-RCX65) (Pair). 165mm VW speaker adapter panels (40-1033-165) (Pair). Speaker adapter cables (41-009) (Pair). Compatible with following vehicles. Car Make / Model. Recoil Echo-Series RCX65 165mm (6.5 inch) Coaxial Speakers (SPK-REC-RCX65). Echo Series 6.5 2-way full-range coaxial Speaker System. Lightweight thermal-formed Polypropylene cones provides high output and accurate frequency reproduction. Butyl rubber surrounds provide durability and deeper mid-bass impact. Featuring a PEI dome tweeter with built-in crossover for smooth & fatigue free highs. Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application. 165mm Speaker Adapter Panels (40-1033-165). Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort. These extra depth 70mm speaker panels are suitable for front doors on select VW vehicles including Golf Mk5 and Mk6, Transporter T5 and T6 or Caddy. Also fit Skoda Octavia II, III and Skoda Superb car models. Speaker Adapter Cables (41-009). A pair of speaker adapter cables for various Fiat vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.
      6.5 Inch Complete RECOIL Coaxial Speaker Upgrade Fitting Kit for Seat Alhambra

      Tags: , , , , , , , ,

    • seat Comments Off
      Seat_Alhambra_Mk2_7N_2010_Single_Double_DIN_Stereo_Upgrade_Fitting_Kit_01_clz Seat Alhambra Mk2 (7N) 2010 Single/Double DIN Stereo Upgrade Fitting Kit
      Seat Alhambra Mk2 (7N) 2010 Single/Double DIN Stereo Upgrade Fitting Kit

      Seat Alhambra Mk2 (7N) 2010 Single/Double DIN Stereo Upgrade Fitting Kit
      Complete stereo upgrade fitting kit to install a Single & Double Din. Aftermarket radio in various Volkswagen Seat and Skoda cars. (With Lowline instrument display cluster). Seat – Alhambra Mk2 (7N) (2010 >). Skoda – Fabia Mk2 (2007 – 2014). Skoda – Octavia Mk2 (Typ 1Z) (2004 – 2009). Skoda – Octavia Mk2 facelift (Typ 1Z) (2009 – 2013). Skoda – Roomster (Typ 5J) (2006 – 2015). Skoda – Superb B6 (Typ 3T) (2008 – 2015). Volkswagen – Amarok (2009 – 2017). Volkswagen – Beetle (A5) (2011 – 2019). Volkswagen – Caddy (3rd Gen Pre-Facelift) (2004 – 2009). Volkswagen – Caddy (3rd Gen Facelift 1.0) (2010 – 2016). Volkswagen – Eos (2006 – 2015). Volkswagen – Fox (2006 – 2011). Volkswagen – Golf Mk5 (1K) (2004 – 2008). Volkswagen – Golf Mk6 (5K) (2009 – 2012). Volkswagen – Jetta V (2006 – 2010). Volkswagen – Jetta VI (2010 – 2018). Volkswagen – Passat B6 (2005 – 2010). Volkswagen – Passat B7 (2010 – 2015). Volkswagen – Polo Mk V (2009 – 2014). Volkswagen – Scirocco (2008 >). Volkswagen – Sharan II (2010 >). Volkswagen – Tiguan (2008 – 2016). Volkswagen – Touran I (2003 – 2010). Volkswagen – Touran I facelift (2010 – 2015). Complete stereo upgrade fitting kit to install a single/Double. DIN aftermarket radio in various Volkswagen cars (With Lowline instrument display cluster). Kit has a removable pocket for single din installation, the pocket is not used for double din installation. This kit also fits various Skoda and Seat cars. Suitable for Skoda Superb cars with the original Columbus navigation radio. This head unit fitting kit includes the following. Twin Fakra antenna adapter (21-139). Double moulded Fakra Aerial adapter cable for European cars that have amplified original antennas. Use with cars that have twin antenna both requiring power. Radio replacement steering wheel adapter interface (49-VW-01). The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake outputs signals to the new stereo. Universal SWC Patch Lead (49-025). Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. Single/Double DIN flush fit facia (50-395). Car radio fascia adaptor panel to allow the fitting of an aftermarket Single/ Double DIN car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. This fitting kit is compatible with Volkswagen original head units fitted with a twin Fakra connection and a Lowline display on the vehicles instrument cluster. Please see pictures below. This lead will be for an extra cost. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “liquidice-2008″ and is located in this country: GB. This item can be shipped worldwide.
      • Colour: Black
      • Country/Region of Manufacture: United Kingdom
      • Warranty Period: 1 Year
      • Type: Single/Double DIN stereo upgrade fitting kit
      • Manufacturer Part Number: FK-395-SWC
      • Finish: Plastic
      • Reference OE/OEM Number: FK-395-SWC
      • Brand: SEAT
      • Custom Bundle: Yes
      • Placement on Vehicle: Front
      • Features: Easy Installation

      Seat Alhambra Mk2 (7N) 2010 Single/Double DIN Stereo Upgrade Fitting Kit

      Tags: , , , , ,