Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Audi TT 8J with fully amplified BOSE or Bang & Olufsen sound systems. This head unit fitting kit includes. Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K). Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade. Steering wheel control interface (49-AUD-03). Car audio and steering wheel control interface for Audi cars that have quadlock connectors behind the radio and have fully amplified BOSE audio systems. The CANbus interface will generate an ignition power supply to the new radio, via the red wire. It will also give out an illumination signal, (orange) speed pulse signal (pink), reverse gear positive output (Purple), Handbrake negative (Green) and Mute out (Yellow/Black). The interface also switches on the original digital amplifier on RNS-E systems. Universal patch lead for steering control interface (49-025). Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000. Flush fit fascia adapter panel (50-622). Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish. This fascia includes side fixing brackets so no fitting cage is required.
