Mens / Womens Shavers. InCarTec FK-743-IGN Double din stereo upgrade fitting kit. Double Din Fascia Adapter Trim (Matt Black). Fakra to Din Antenna Adapter. 103mm High Double Din Cage Kit. CANbus Radio ISO Lead. Compatible with following vehicles. Car Make / Model. Radio fascia adapter panel to allow the fitting of an aftermarket Double DIN Car stereo upgrade. This fascia is a trim piece that covers the radio cage to give a professional finish when installing an aftermarket double DIN radio. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. CANbus Radio ISO lead. Audio cable to convert Citroen/ Peugeot cars with Quadlock connector to a European car radio with ISO connectors. Includes a CANbus 12v accessory ignition supply. Car audio metal cage kit 103mm high. This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes. Complete with fixings to attach to the new car radio body. Only suitable for vehicles without steering wheel controls. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
