Upgrade Kit Fits

• 10Apr

  Nissan Juke (2014-2019) Double DIN Car Stereo Upgrade Fitting Kit (GLOSS BLACK)

  nissan Comments Off
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-972 Nissan Juke (2014 – 2019) Double Din Car Stereo Upgrade Fitting Kit (GLOSS BLACK). Double Din Fascia With Bracket (Gloss Black). Steering Control Interface (20 pin). Rectangle to Din Car Aerial Antenna Adaptor Cable. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. 1st GEN Facelift (F15). This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This facia includes side fixing brackets so no fitting cage is required. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Steering wheel control interface and adapter cable for Nissan Juke cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. (8 function steering wheels). Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. For Single DIN installation you will require an additional pocket. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: 2014-2019, black, double, fitting, gloss, juke, nissan, stereo, upgrade

• 04Apr

  BMW X5 E53. Double DIN stereo upgrade fitting kit with SWC (DSP AMP BYPASS)

  double Comments Off
  
  
  
  DSP amplifier bypass cable (20-316). Adapter cable to bypass the original DSP amplifier in a BMW X5 car with original sat nav. This adapter cable allows the fitting of an aftermarket stereo upgrade by bypassing the original DSP amplifier in the car. The original amplifier uses a digital data audio signal and therefore cannot be used with an aftermarket radio. The cable bypasses the original amplifier allowing the new radio to play audio directly to the cars speakers. The original amplifier is located behind the rear left quarter panel in the boot. The amp bypass cable connects to the speaker connectors from the amplifier, it also connects to the quadlock connector from the original tuner module located under the boot floor next to the battery. A 5 metre extension is provided to then extend these audio and power connections to the dashboard. The cable then terminates with a quadlock connector, this allows for the fitting of an ISO radio adapter cable or a steering wheel control adapter cable to fit to the new radio. The extension also accommodates for speed pulse and reverse gear signals to be extended to the steering control interface, these are loose wires on the adapter cable that need to be hardwired at the back of the car. PLEASE NOTE: This bypass cable is for cars with the DSP amplifier only, below are images of the DSP amplifier. Some cars have a power amplifier, a different fitting kit (FK-770-NAV) is needed for these cars. 5M antenna extension lead (21-028). 5 metre male to female Fakra antenna cable extension. With water blue universal Fakra cable. Used to extend the fakra connector when fitted at the rear of a car. Antenna adapter cable (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Steering wheel control adapter cable (29-721). This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The built in interface will allow the original audio controls on the steering wheel to work with an aftermarket radio. This adapter cable is designed to be plug and play installed along with the BMW X5 amplifier bypass cable. When used with the bypass cable, it will also provide speed pulse and reverse gear signals to the new radio. Universal patch lead for steering control adapter (29-025). This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted. Fascia adapter panel (50-770-NAV). Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. This fascia is supplied with 2 extra mounting brackets, cars with original navigation radios have different mounting points to cars with standard radios, fitting instructions are supplied. We recommend this installation is done by a professional car audio technician.
  
  

  Tags: bypass, double, fitting, stereo, upgrade

• 29Mar

  Double Din Stereo Upgrade Fitting Kit WITHOUT STEERING CONTROLS for Suzuki Swift

  double Comments Off
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec Fk-914 Double Din Car Stereo Fitting Kit For Suzuki. Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in Suzuki Swift and Suzuki Swift Sport (2010 – 2017) car models (Without Steering Controls). Aerial Adapter to Male Din. Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. Car Radio ISO Connection Harness. This plug and play cable allows you to connect an aftermarket car radio with European iso connectors to the cars wiring using the original connectors in the car. This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers. FOR CARS WITH STEERING WHEEL CONTROLS PLEASE USE FK-914-SWC. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: controls, double, fitting, steering, stereo, suzuki, swift, upgrade

• 21Mar

  Citroen C3, DS3 Double DIN Stereo Upgrade Fitting Kit (WITH SWC and PDC)

  citroen Comments Off
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-982-PDC Citroen C3, DS3 Double Din Car Stereo Upgrade Fitting Kit (WITH SWC and PDC). The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio. Double Din Fascia Kit (Matt Black). Steering Wheel Control / Parking Sensor Retention Interface. Fakra to DIN Antenna Adapter. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Only suitable for vehicles with steering wheel controls and factory parking sensors. Dashboard modifications are required, we strongly recommended installation by a professional car audio installer. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses the original radio brackets for installation of the new radio. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio. This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo. It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio. This interface will also allow you to access the Settings menu on the cars screen menu to change time and date. Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units. The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare cases “modification” may be necessary or needed. Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: citroen, double, fitting, stereo, upgrade, with

• 13Mar

  Double DIN Stereo Upgrade Fitting Kit (WITH STEERING CONTROLS) for Toyota Aygo

  double Comments Off
  
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-650-SWC Double Din Fascia Fitting Kit. Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo car models. This fitting kit will also retain the factory USB and AUX functions (if vehicle is equipped). Double Din Fascia (Piano Black). Steering Wheel Control Interface. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. The cable also provides a speed pulse (for GPS) reverse output (for an aftermarket reverse camera) and handbrake output signal to the new stereo. The AUX 3.5mm jack below the original radio is retained with this interface by connecting the left and right inputs (2 RCAs) found on the back of most double DIN aftermarket radios that don’t feature an AUX jack on the front panel. The USB can be retained with part 24-250. The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen, Peugeot and Toyota Aygo cars that have an original USB socket. Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. This fitting kit fits Double DIN head units with a maximum depth of 80mm. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: aygo, controls, double, fitting, steering, stereo, toyota, upgrade, with

• 12Mar

  Complete Double Din Stereo Upgrade Fitting Kit For BMW 3 Series E46 1999-2006

  complete Comments Off
  
  
  
  Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in BMW 3-Series (E46) cars fitted with Basic radio and a round pin connection behind the original head unit. This kit includes cutting guides and new panels to allow easier modification of the heater box which is needed to fit a full sized Double DIN radio into the dashboard. This head unit fitting kit includes. Antenna adapter cable (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Steering wheel control interface (29-627). Steering wheel control interface and adapter cable for various BMW cars to fit an aftermarket radio upgrade. The cable adapts from the 17 Round Pin connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Universal SWC patch lead (29-025). Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units. BMW 3 series (E46) Double DIN fascia kit (50-951-RHD). Car radio fascia adaptor panel to allow the fitting of an aftermarket Double DIN car radio upgrade on BMW 3 Series (E46) car models. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia fitting kit includes cutting guides and new panels to allow easier modification of the heater box which is needed to fit a full sized Double DIN radio into the vehicles dashboard. If fitting a radio with a high level Single DIN chassis (Such as a Sony XAV-AX3250DB) then this kit allows fitting with no heater box modifications needed. If changing an original non-navigation radio, modifications need to be made to the centre console to relocate the heater controls. Suitable for Saloon (sedan), Touring, Convertible, Coupe and Compact (Hatchback) body styles of the BMW E46 3-Series. PLEASE NOTE: Modification is required to fit a head unit with a Double DIN chassis. We recommend this is done by a skilled car audio technician! Modification to the heater box can be avoided by fitting a radio with a compact/ single DIN rear chassis at the top the radio, such as the SONY XAV-AX3250DB shown below. Below is a picture of an aftermarket head unit upgrade using this fascia kit with the original RHD centre console panel modified to fit the climate control module where the upper storage tray was.
  
  

  Tags: 1999-2006, complete, double, fitting, series, stereo, upgrade

• 11Mar

  Car Double Din Fascia Stereo Upgrade Fitting Kit for Seat Ibiza 2008-2017 Mk4

  double Comments Off
  
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-342P Car Stereo Fascia Fitting Kit For Seat. This fitting kit allows you to replace the original factory fitted head unit in the vehicle with a new aftermarket Double DIN version, retaining the original dashboard appearance and the steering wheel control functions. Double Din Flush Fit Fascia Adapter (MATT BLACK). Steering Wheel Control Interface and Radio Adapter Cable. Fakra to Din Aerial Adapter (Phantom Power) with Bullet Connector. Universal patch lead (Included). Compatible with following vehicles. Car Make / Model. This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior. This fascia adapter panel is to fit a double din aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a matt black finish and is a flush mount style so it replaces the radio trim supplied with the aftermarket radio. This gives a flush professional finish to the installation. The fascia is supplied with a double din fitting cage. Standard cages supplied with aftermarket radios are too big for the fascia trim. Fits Seat Ibiza Mk4 (2008 – 2017). Will not fit cars with original MIB II colour screen. Steering wheel control interface and adapter cable for Seat cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility, see the instructions for more information. The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo. The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on. We also have this part available with a junior timer receptacle terminal to make it easy to connect into the electric antenna turn on position of a standard ISO connector, the 21-123. Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size.
  
  

  Tags: 2008-2017, double, fascia, fitting, ibiza, seat, stereo, upgrade

• 29Feb

  Citroen C3 (10-16) DS3 Double DIN stereo upgrade fitting kit (WITHOUT SWC)

  citroen Comments Off
  
  
  
  This head unit fitting kit includes. Citroen/Peugeot CANbus Radio ISO lead (20-161-IGN). Audio cable to convert Citroen/ Peugeot cars with Quadlock connector to a European car radio with ISO connectors. Includes a CANbus 12v accessory ignition supply. Fakra to DIN antenna adapter (21-106). Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier. Double DIN fascia kit (50-982). Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses the original radio brackets for installation of the new radio. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. The installation of this fascia is strongly recommended to be done by a professional installer, modifications to the dashboard are required. Only suitable for vehicles without steering wheel control.
  
  

  Tags: 10-16, citroen, double, fitting, stereo, upgrade, without

• 27Feb

  Mercedes C-Class W204 (2007-2011) Double DIN stereo upgrade fitting kit

  mercedes Comments Off
  
  
  
  This complete head unit fitting kit includes. Double Fakra antenna adapter (21-139). Double moulded Fakra Aerial adapter cable for European cars that have amplified original antennas. Use with cars that have twin antenna both requiring power. Mercedes Steering wheel control Interface (49-MB-04). The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals. For Mercedes cars with the newer steering control protocol only. Universal 49-Series Steering wheel control patch lead (49-025). Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units. FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED PATCH LEAD PLEASE LET US KNOW. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia kit is designed to relocate the original buttons below the radio to the top display cover. This fascia includes side fixing brackets so no fitting cage is required. PLEASE NOTE: This fascia is suitable for cars without PDC and optional extra buttons below the original radio.
  
  

  Tags: 2007-2011, c-class, double, fitting, mercedes, stereo, upgrade, w204

• 02Feb

  Car Double DIN Stereo Upgrade Fascia Fitting Kit for Citroen C1 2014-2021

  double Comments Off
  
  
  
  
  
  
  
  Mens / Womens Shavers. InCarTec FK-650 Double Din Fascia Fitting Kit. Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit in Citroen C1, Peugeot 108 and Toyota Aygo car models (Without Steering Controls). Double Din Fascia (Piano Black). Car radio ISO connection harness. Compatible with following vehicles. Car Make / Model. Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car. Standard Radio ISO Lead. Radio ISO cable to connect Toyota cars to an after-market European car radio with ISO style connectors. PLEASE NOTE: This ISO lead will not retain steering wheel audio controls. This fitting kit fits Double DIN head units with a maximum depth of 80mm For vehicles with steering wheel controls please use FK-650-SWC. The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size. Some knowledge of car audio installation is helpful, as in some rare case “modification” is necessary. IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.
  
  

  Tags: 2014-2021, citroen, double, fascia, fitting, stereo, upgrade

« Previous Entries   Next Entries »